* This is NEWER DC version -- Can not be used to replace AC version ( you need conversion KIT ),
But if you already have the newer DC control, and are looking for JUST the Control Board replacement,
then this is the right part to order.
Control Box NorthStar CUC2 DC 7362958 - Blue Logo
This is ONLY the Control - power or control cables NOT included ( sold separately ).
**
CROSS REFERENCE = Commercial NorthStar Models PA102, PA132, PA162, PA192, PA252, PA322
* Special order - 2 week Lead Time
* Does not replace ( directly ) the Obsolete item ( AC version ).
The recommended KIT includes the Newer Commercial Universal Controller ( CUC2 ) Assembly
PN 7362982 = New DC control box ( Blue and PN 7362958 )
+ Power Supply ( CONTROL ) cable ( DC ) - PN 7362607 Now connector is 9-pin male
+Transformer ( PN 7362673 )
+ Power Cord AC to the Transformer ( PN 7362720 )
***************
Additional Reference Information:
All newer controls run on DC and not AC, so conversion of all electric parts required if replacing the "board" on an older model that is wired for AC.To Convert older AC system the following parts are required to be changed to DC parts.1 - Commercial Universal Controller ( CUC2 ) Assembly PN 7362982 ===
New DC control box ( Gray with Blue Logo = PN 7362958 )
+ Power Supply cable ( DC ) - part # 7362607. Now connector is 9-pin male.
2 - "Literature Kit PN Different for each Model*** 2" Softener or Filter = PN 7364227
== all KITS = Directions ( valve specific ), Transformer ( power supply ) 24 volt DC, 65W -
PN 7362673+ Power cord ( to tranformer ) PN 7362720
****** ITEMS below sold separately ***********3 - the 2" softener valve requires new DC Aspirator Solenoid ( brown 24 volt DC solenoid only ) PN 7362398
4 - Multi-tank 2" valves require new no-bypass bermad valve solenoid 24 volt DC PN 7368409 ( this is solenoid only ).
Special Order Item, and can not be returned, so be sure it's what you n
eed before ordered.7 - 10 days lead time before item ships from our Florida warehouse.
