24 Volt AC Output Transformer 20 VA, Input 120 Volt 60 Hz 0.23 A ( 230 mA ).
This 24 Volt AC transformer can be used as a replacement for most water softener valves using a 24 volt AC transformer ( but not Rainsoft Valves
NOTE: Most Valves use a transformer with a "stronger" output ( 400 - 450 mA ).
Old GE PN = WS26X1001 and old Sears PN = 7084550.
Note: Autotrol models typically use a 12 volt transformer ( PN AP1000811, new PN 44149 ).
Does NOT include any wiring.
NOTE: Load is to be attached to the 2 outer terminals.
No "ground" center terminal, as none "required" when using 24 volts AC power source.
NOTE: There is not "+" or "-" ( polarity ) on this or any other AC ( alternating current ) transformer.
Polarity only applies to DC ( direct current transformers ).