Valve Erie 542 Egg Timer Back Wash Only

NONE LEFT.

Be sure to select piping adapters unless you already have this type of Erie Valve, and will be re-using your old adapter fittings.

Replacement Valve comes set up for 1.05" riser tube.
Includes at no charge new Top ( 287-166 ) and Bottom ( MD1236 ) Distributors.

Also a NOTE about the Drain Port ( since 2019 ) =
Only made with BSP ( British Pipe Threaded ) opening, and therefore now includes a barbed elbow fitting.
The fitting threads into the drain port, and allows the use of 1/2" I.D. ( 5/8" O.D. ) drain hose.
Also, we have been told you can use 1/2" NPT fitting if you use a lot of Teflon Tape.
This is a non-pressurized connection, so you can get it to "hold" with a lot of Teflon Tape ( when using 1/2" NPT male fitting ).

2 Cycles = Backwash and In Service
Adjustable time = 0 - 120 Minutes

How To Replace Your Old Valve Guide

Erie 542-030 Technical Manual