How does Hankscraft metered valve compare with the Fleck 5600 or the Hankscraft digital unit in terms of lasting durability|
How does Hankscraft metered valve compare with the Fleck 5600 or the Hankscraft digital unit in terms of lasting durability The RESINS does all the "work", so all water softeners are 95% the same in
Backwash Only Valve Replacement Options|
If replacing a Fleck 5600 or similar Backwash Only Valve, We recommend one of the following, Fleck 5600 in standard or "L" power head with 12 day timer, see: https://www.softenerparts.com/Valve_Fleck_
Fleck 5600 SE or SXT are NOT the same as Mechanical Versions of Fleck 5600|
The Electronic Fleck Valves ( 5600SE, SXT, 6600, 6700, etc ) use Special Power Heads.
I have a Fleck 5600SXT. Do all of the Fleck 5600 parts fit this model too?
Fleck 5600 SE or SXT are NOT Recommended over Mechanical Fleck 5600|
Why we do not recommend the Electronic Fleck Valves ( 5600SE, SXT, 6600, 6700, etc ).
The SXT is electronic, and has many weaknesses... Circuit board ( replacement cost $ 150 ) Transformer (
Fleck SE or SXT Error Codes|
The Electronic Fleck Valves ( SE and newer SXT ) ERROR Codes
Err 1 ( continuously running motor ) is usually a broken CAM or defective Switch. see cam https://www.softenerparts.com/Cam
Clack Circuit Board Battery Replacement Explained|
"C-Series" Product Update
When a 4000 or 400 series error appears on a circuit board it is recommended that the lithium battery (CR2032) be replaced.
The battery helps with writing to memory in
Search for Part Number On Website - How do I?|
Question: How Do I SEARCH for Part on the Website? Answer: The Product Search "box" is in the upper right hand side of our website, above the list of categories. ENTER your Part Number, Or a one, or
460TC Timer Off Set When Multiple Valves Used|
When two valves are controlled by the 460TC timers, and you need them to run on different nights,
You can: To "off set" the digital timer, you can leave one unplugged for 1 day.
Have them SET to
HANKSCRAFT H2O PRODUCTS and Replacement Valves|
Our company mission is to "Deliver value through innovation, creativity and diversification". It is simple, yet it guides everything we do.
Our history dates back to the
Fleck 5600 Econominder - Replacement - Repair Options|
Metered valves we offer as a replacement for Fleck 5600 Econominder are: 1 ) Fleck 5600 Econominder Metered https://www.softenerparts.com/ Valve_Fleck_5600_Metered_ Softener_Valve_p/3405600102. htm 2
Fleck Piston 24507 - Fleck Model 5656 / 5665 UF are NOT the same as Mechanical Versions of Fleck 5600|
Fleck Piston 24507 - Fleck Model 5656 / 5665 UF are NOT the same as Mechanical Versions of Fleck 5600 or SE, SXT versions
We have only seen this version of the Main Piston in models sold in
Alternate Drain Fitting that comes with every Hankscraft Valve|
Two Drain Fittings are Included with the Hankscraft Valves we ship. This extra 1/2" female threaded adapter can be used in place of the Barbed Fitting to allow you to use a 1/2" male threaded connect
Stolen Credit Card Information- someone made an unauthorized charge to card number after it was used on your website|
Sorry to hear of your credit card breach. And I appreciate your calm demeanor in telling us about it ( we have had a few "fly off the handle" when they have a similar issue, over the 18 years we have