Please place Orders Online

Email Questions
support@softenerparts.com

Technical Support 7 days a week.




Softenerparts.com is a BBB Accredited Water Conditioning Equipment Store in Venice, FL
Knowledge Base:  

You are here: Knowledge Base : constant
Page of 1
No Pressure Unless the Softener is By Passed
When do the resins in the softener tank need to be changed? 1. The average water softener will not need it's resins replaced in it's life time ( 20 + years ). 2. Water softening resins need
Pressure Drop or Flow Rate reductions through a Water Softener / Filter System - Things to Consider
Pressure or Flow Rate Problems # 1 REASON is the RESINS in the water softener need to be changed. . and this is discussed at the end of this article ( and several other places on our website
Fleck Valve Leaking to Drain Continuously
Fleck valves use pistons and internal seals to control water flow through the control valve head. When water continuously flows out the drain hose, and the unit has finished the regeneration proc
Brine Draw Failure in Sears, GE Smart Water, North Star Systems, Whirlpool, Morton, Ecodyne, Ecopure and others
Causes of suction failure in order of importance and frequency: 1 ) Gasket under Nozzle Venturi is worn, cracked, or "dried out". 2 ) Seal Kit is failing at some critical area, and not sealing. Note:
Sodium Levels in Water when Softened
How much sodium is added to the water by the softener?" That depends on the hardness of the original water. This table shows the additional amount of sodium consumed by drinking one quart ( 4 - 8 oz
Fleck 2500 leak to drain - Reasons why valve is still leaking after replacing the Seals & Spacers ( 60021 )
Reasons why Fleck 2500 valve is still leaking after replacing the Seals & Spacers ( 60121 ). Look at the condition of the Teflon on the Main Piston ( 60900 ). see: http://www.softenerparts.com/Piston
MediaGuard filter on Distributor Tube can cause pressure loss
Customer found this in his tank when replacing his resin: The unit has what is called "MediaGuard" installed on ( around ) the center distributor pipe. We do not use them or sell them ( of the media