Brine Suction problem with Fleck 5600 or similar Hankscraft Valve|
If your Fleck 5600 ( or similar Hankscraft design) Valve is not drawing ( sucking in ) the salt water from your brine tank, then here is a list of things to check and information about Brine Suction F
HANKSCRAFT H2O PRODUCTS and Replacement Valves|
Our company mission is to "Deliver value through innovation, creativity and diversification". It is simple, yet it guides everything we do.
Our history dates back to the
Recommendation of Fleck 5600 Econominder and Hankscraft Equivalent water softener replacement valves
- Which Brand is Best?|
I'm trying to decide what brand / manufacturer of water softener system is best. Who do you recommend?
We like any system that uses the Fleck 5600 Econominder Valve. And these are not sold as a
Alternate Drain Fitting that comes with every Hankscraft Valve|
Two Drain Fittings are Included with the Hankscraft Valves we ship. This extra 1/2" female threaded adapter can be used in place of the Barbed Fitting to allow you to use a 1/2" male threaded connect
How does Hankscraft metered valve compare with the Fleck 5600 or the Hankscraft digital unit in terms of lasting durability|
How does Hankscraft metered valve compare with the Fleck 5600 or the Hankscraft digital unit in terms of lasting durability The RESINS does all the "work", so all water softeners are 95% the same in
Backwash Only Valve Replacement Options|
If replacing a Fleck 5600 or similar Backwash Only Valve, We recommend one of the following, Fleck 5600 in standard or "L" power head with 12 day timer, see: https://www.softenerparts.com/Valve_Fleck_
Culligan Valve Replacement Question|
QUESTION: I got a Culligan Medalist Series water softener and i want to get away from culligan. What valve would replace the one I got. ANSWER: * Sorry, none ( directly ).
All true Culligan Valves a
Technetic 1000, Plus, 1100i replacement Valve Recommendation|
Hi I have an Technetic 1100 it needs to be replaced can you tell what one would be the best to replace it with. Thanks The Valve that is closest to your Technetics is the Autotro
Fleck 5600 SE or SXT are NOT Recommended over Mechanical Fleck 5600|
Why we do not recommend the Electronic Fleck Valves ( 5600SE, SXT, 6600, 6700, etc ).
The SXT is electronic, and has many weaknesses... Circuit board ( replacement cost $ 150 ) Transformer (
Fleck 5600 Econominder - Replacement - Repair Options|
Metered valves we offer as a replacement for Fleck 5600 Econominder are: 1 ) Fleck 5600 Econominder Metered https://www.softenerparts.com/ Valve_Fleck_5600_Metered_ Softener_Valve_p/3405600102. htm 2
Salty Water Taste - New Valve Installation|
NEW Valve Installation - Salty Water - Possible Causes, Include: # 1 reason is the distributor pipe is too short by a fraction of an inch, or incorrect diameter ( must be 1.05" - same as 3/4" PVC pipe
Manufacturer Warranty on Valves, Timers, Control Boards, Meter Covers, and Complete Systems|
Most manufacturers extended a 5 years warranty on new complete valve head ( also media tanks -- leak warranty only - not on the media inside the tank ), and on structural parts, but this really only
Fleck Valves - LEAKS out the DRAIN HOSE|
LEAKS out the DRAIN HOSE: Fleck valves use pistons and internal seals to control water flow
through the control valve head. When water continuously flows out the
drain hose, and the unit has fini