Knowledge Base:  
You are here: Knowledge Base > Other Valves & Brands > Clack WS1 and WS1.25

Page of 1
Brine Suction problem or High Water in Salt tank with Clack WS1 Valve
If your Clack WS1 Valve does not appear to be drawing ( sucking in ) the salt water from your brine tank, then here is a list of things to check and information about Brine Suction Failure. see:
Clack Circuit Board Battery Replacement Explained
"C-Series" Product Update When a 4000 or 400 series error appears on a circuit board it is recommended that the lithium battery (CR2032) be replaced. The battery helps with writing to memory in
Clack WS1 Error E1, Err 101, 1001, or E2, Err 102, 1002, or Error E3, Err 103, 1003
Customer Wrote: I am getting a code 1001 flashing on display and unable to program and run. I removed the drive cap, piston and stack assy. and they seem to look okay. The drive cap main gear was bot
Clack WS1 or WS1.25 - How to Tell the Difference
Customer Wrote: I am fairly confident that what I have is a WS1, but I cannot find a label with either a model or serial number. What is the best way to verify that what I have is the WS1? The easies