Knowledge Base:  
Technetic - Series 1010 Bypass Valve
Last Updated: 04/04/2012
Technetic 1000 and Plus 1000i - used Series 1010 Bypass Valve. And many have / will become cracked and start leaking.

The By Pass ( 1010 ) is obsolete, and no longer available from any known source ( has not been for several years ).

Newer models use the 1265 By Pass ( large threaded Nut connection to valve body ),
This only works as replacement of exact same design.
Spacing does not match older Valve Bodies.
see:
By Pass 1265 for Performa and newer Technetic Valves

Repair Option:

Remove By Pass, and then you can screw the Adapter Nuts directly to the Threads on the Valve Body. You will find / see these threads on the actual Valve Body, once you remove the defective By Pass. You can continue to use your Technetic control head, only now without having the manufacturer's By Pass valve.

Below is photo of the Obsolete 1010 By Pass

1010 By Pass



Please Rate the Usefulness of this Article

Comments:
 

Related Articles
 > # 1 FAQ = High Water in Brine Tank - Problem -Softener does not remove the water from my salt tank or overflow
 > 3 ways the Backwash cycle could be "blocked" in an Autotrol system
 > 440 - 460 Output Gear Repeatedly Breaking After Replacement.
 > 440 or 440i - Which Timer Assembly Do I Have - How to Tell
 > 440 or 440i or 460TC - Cycles controlled by the Camshaft used
 > 440 Timer Rebuilding / Repair / fix Guide
 > 440 Tripper Arm Gear Repeatedly Breaking After Replacement.
 > 440 Upgrade to 760 metered demand Logix Timer - How?
 > 440i motor replacement guide
 > 440i Sticking in Backwash or Brine Refill
 > 440iHV, 460TC, 460i Timer Assembly WARRANTY Policy of Softenerparts.com
 > 460i Timer RESET if it is Regenerating EVERY NIGHT
 > 460TC or Logix 740 - Which Timer Replacement is Best?
 > 460TC Timer Off Set When Multiple Valves Used
 > 740 and 760 Logix Timer Programming Instructions
 > 940 and 960 Timer Obsolete - Replacement Options when used on 255 Valve
 > Air Check - Ball seated or dropping early during the BRINE/SLOW RINSE -Autotrol 155 or 255 Series
 > Air Check Autotrol Old 36F or Newer Style - How to Tell - How to Clean
 > APK5 - 255 Upper Valve Module - Brine Suction / Brine Tank Overflow after replacing the Top part of the Valve
 > Autotrol 155 ( 1550-TC ) Valve Leaks - How to solve them
 > Autotrol 155 or 255 - How to Tell Which You Have
 > Autotrol 155 or 255 - Injector Size / Color - Why BLUE is sometimes used on 8 inch tanks
 > Autotrol 155 or 255 High Water in Brine Tank - Problem No Suction or Overflowing
 > Autotrol 155 with 440 Upgrade to 740 Day timer or 760 metered demand Logix Timer - How?
 > Autotrol 163 or 168 Rebuild Kits
 > Autotrol 163 or 168 replacement Valve Recommendation is Performa 263 or 268
 > Autotrol Date Codes - Serial Numbers
 > Autotrol Valve Flow Rate Problem - Either Resin in Tank or Valve Discs not Opening Enough
 > Autotrol Valve Leaking to Drain after Replacing Valve Discs
 > Backwash Plug and Injector Cap Removal Tool
 > Backwash Plug Number - Autotrol How can I tell what number of backwash plug I need?
 > Brasswell Water Quality Systems - Jackson, Missouri
 > Brine Refill after Autotrol 155 or 255 Repair - Purge Air from the Valve head, Brine line & Air Check
 > Brine Refill Problem - No water in salt tank - Autotrol
 > Bruner Valve - Old and New Styles
 > By Pass - Autotrol Old Style - How to Use
 > By Pass - Autotrol Old Style - Leaking When Connected to New Autotrol Valve
 > Calender Over Ride setting for 760 and 762 Logix Timer Programming
 > Can an Autotrol 255 valve be converted from softener use to filter ( carbon ) use?
 > CSI Signature Series, and Water Soft WSCB-32D
 > Ecowater proprietary models are 2000, 2002, 2200, 2500, 2502, 3000, 3002, 3200, 3500 Series and late model 2100 PF series, and we can't get most parts
 > Erie 2001 Valve Leaking to Drain or Brine Tank - Cam Sync problem
 > Err 3 on 740,742,760, or 762 Logix Timer
 > Fittings Measurements Different Then Expected ( 1/4 and 3/8 fittings )
 > Fleck 5000 Mechanical Power Head and Timer Motor Obsolete
 > Freeze Damage to Air Check Body Autotrol 255
 > Gears, Housing, Motor Inside the 460i and 460TC timers - What is the difference?
 > General Ionics Valve or Tank Replacement
 > H2OW TO Softener = Fleck 5600 SE valve on 10 x 19 tank in cabinet
 > Hard water when Autotrol Valve is working and using Salt properly - By Passing the RESIN?
 > How To Repair A Logix Controller - Replacing Back Up Capacitor on the Board
 > InAqua Valve = Model 9400
 > Kinetico Systems are Proprietary
 > Mermaid Valve - Uses Fleck 2500 parts
 > Model 172 and 180 are Obsolete - Commercial Autotrol Valves and Parts
 > Model 360, 363 and 368 Autotrol Valves and Parts
 > NovRam, 460i and 460TC timers - What is the difference?
 > Performa Valves Keep Breaking 440i Timers - Solution is...
 > Rainsoft Amazon Gold Series ( Silver Series ) Seals ( Gaskets ) and Spacers are Fleck Parts
 > Rayne Model RXD 1000 and 1500 Valve Replacement and Repair Parts ( Fleck ).
 > Screen shows 1.1 on 740,742,760, or 762 Logix Timer - Button Test Mode
 > Setting Time of Day with the Autotrol 440 Tripper Arm Gear 99F
 > Star Water Systems
 > Technetic 1000, Plus, 1100i replacement Valve Recommendation
 > Tectonic Water Softener Model# CB-32D
 > Top Distributor Modifications - MD1203 used with Performa 263 and 268
 > Turbulator - Why Would Someone Use This Over A Standard Bottom Distributor Basket / Riser Pipe?
 > Water Boss
 > Water Right Sanitizer
 > Water Soft WSCB-32D is Autotrol 255 460i or Fleck 5600 SE
 > Water Soft WSCB-32D water softener = Autotrol Valve Links
 > WaterSoft G series and ISOBAR 2092
 > Wolverine with Valve Body # 19773 parts available