Please place Orders Online

Email Questions
support@softenerparts.com

Technical Support 7 days a week.




Softenerparts.com is a BBB Accredited Water Conditioning Equipment Store in Venice, FL
Knowledge Base:  
You are here: Knowledge Base > General questions - Water Treatment
Will a Water Softener make my water safe to drink?
Last Updated: 09/21/2010
No. Your water must be safe to drink before you condition the water
with a softener. If you are concerned about the safety of your drinking
water, contact your local health department about getting a bacteria test,
or full lab analysis on your water.


Tags: soft, safe, drink,


Please Rate the Usefulness of this Article

Comments:
 

Related Articles
 > # 1 FAQ = High Water in Brine Tank - Problem -Softener does not remove the water from my salt tank or overflow
 > Links to Other Websites
 > How and Why to use Acid Neutralizing Media Calcite and Corosex ( Magnesium Oxide )
 > No Pressure Unless the Softener is By Passed
 > How a water softener actually works and why does it feel slimy
 > Average Salt Amount Needed and Normal Water Level In Brine Tank
 > Salt Usage In Water Softening
 > No Salt Systems for Water Softening
 > Dishwasher Glassware Etching Cause Explained
 > Air in water lines after Softener Regenerates
 > Common Water Problems
 > ECO - Friendly Alternative to SALT Softeners
 > How do you determine if you actually need a softener?
 > How do you put a softener out of service without damaging it?
 > How Long Until Water Feels Soft Again After Repair
 > Hydrogen Sulfide levels affected by amount of water used and the ground water table
 > Will a Water Softener remove the iron from my water?
 > Iron Staining and my Water Softener seems to be working okay, Why is that?
 > Odor - Sulfur (Hydrogen Sulfide) in your water
 > I have a Water Softener, but I still have odor in my water. Why is that?
 > Orange Sand Coming Into House
 > Salty Water Taste in the Morning
 > High Water in Brine Tank - Problems and Solutions
 > Sodium in the Water Softening
 > What Brine ( Salt ) Setting Amount to Use?
 > Stains in Laundry - several possible causes
 > Looking for someone to Service My Water Softner ( Softener ) in my area.
 > Pump Pressure Low or Cycles OFF and ON ( Well Water )
 > Stinky - Rotten Egg - Odor
 > Sodium Levels in Water when Softened
 > Air Check inside Brine Tank can becomes Stuck or Water Logged
 > Aerator Use and Cleaning Q & A
 > Air Check - Ball seated or dropping early during the BRINE/SLOW RINSE portion on the 155 or 255 Series Valve
 > Brine Valve Replacement in Salt tank ( with Float Shut Off )
 > UV for Water Purification - Does it Work?
 > Why Gravel is Not Needed in Residential Size Water Softener
 > Frequency of Regeneration - How Often Should Softener Recharge?
 > Fittings Measurements Different Then Expected ( 1/4 and 3/8 fittings )
 > Choosing a Resin - What is the Difference
 > Basic Installation Guide for New Water Softener
 > Which is better or cheaper... Powdered Resin Cleaners or Res-Up Liquid?
 > Choosing a Softener System - Which Brand is Best?
 > Sediment filter ahead of the softener - When, Why, and Which one.
 > Brine Tank Assembly - Questions, Answers, Video Link
 > ChemTech and Pulsafeeder chlorine solution pumps
 > Potassium Chloride - Substitute for Salt ( Sodium Chloride )
 > Pressure Drop or Flow Rate reductions through a Water Softener / Filter System - Things to Consider
 > Recommendation of Fleck 5600 Econominder and Hankscraft Equivalent water softener replacement valves - Which Brand is Best?
 > How does Hankscraft metered valve compare with the Fleck 5600 or the Hankscraft digital unit in terms of lasting durability
 > MediaGuard filter on Distributor Tube can cause pressure loss
 > AIR INJECTION OXIDIZING FILTER SYSTEM = AIO
 > Do I need an Iron Filter?
 > Salty Water Taste - New Valve Installation
 > Motor Identification - How to determine Type and Part Number
 > Irrigation - Iron Removal options