Please place Orders Online

Email Questions
support@softenerparts.com

Technical Support 7 days a week.




Softenerparts.com is a BBB Accredited Water Conditioning Equipment Store in Venice, FL
Knowledge Base:  
You are here: Knowledge Base > Autotrol 155, 255, 268 valves
Water Soft WSCB-32D water softener = Autotrol Valve Links
Last Updated: 04/23/2012
To my knowledge the Water Soft units ( WSCB-32D water softener ) use the Autotrol Valve
made by the GE Water Treatment / Autotrol division. The "CB" stands for Cabinet. The "32D",
stands for 32,000 grain capacity ( one cu.ft. of resin used ) and Demand regeneration timer assembly
( typical the 460i ).

And the most common valve is the Autotrol 255 with the 460i Timer Assembly ( made after 1995,
prior years would be the 155 valve ).

Autotrol 255 for diagrams and parts.






For Helpful guides see:

AUTOTROL 255 VALVE with 460i ELECTRONIC METER CONTROL OPTION


(Click image to open)

and

255/460i Trouble Shooting (
Click image to enlarge)   
   

and

SERVICE and REPAIR of WATER FILTRATION SYSTEMS
SEE:Rebuild Valve Guides



Please Rate the Usefulness of this Article

Comments:
 

Related Articles
 > # 1 FAQ = High Water in Brine Tank - Problem -Softener does not remove the water from my salt tank or overflow
 > 440iHV, 460TC, 460i Timer Assembly WARRANTY Policy of Softenerparts.com
 > Autotrol 155 or 255 - How to Tell Which You Have
 > 440 Timer Rebuilding / Repair / fix Guide
 > Backwash Plug Number - Autotrol How can I tell what number of backwash plug I need?
 > Brine Refill Problem - No water in salt tank - Autotrol
 > 740 and 760 Logix Timer Programming Instructions
 > Autotrol Valve Flow Rate Problem - Either Resin in Tank or Valve Discs not Opening Enough
 > Autotrol Valve Leaking to Drain after Replacing Valve Discs
 > Bruner Valve - Old and New Styles
 > Brine Refill after Autotrol 155 or 255 Repair - Purge Air from the Valve head, Brine line & Air Check
 > Erie 2001 Valve Leaking to Drain or Brine Tank - Cam Sync problem
 > Freeze Damage to Air Check Body Autotrol 255
 > General Ionics Valve or Tank Replacement
 > H2OW TO Softener = Fleck 5600 SE valve on 10 x 19 tank in cabinet
 > By Pass - Autotrol Old Style - How to Use
 > Performa Valves Keep Breaking 440i Timers - Solution is...
 > Rainsoft Amazon Gold Series ( Silver Series ) Seals ( Gaskets ) and Spacers are Fleck Parts
 > 440i motor replacement guide
 > 460i Timer RESET if it is Regenerating EVERY NIGHT
 > Setting Time of Day with the Autotrol 440 Tripper Arm Gear 99F
 > Tectonic Water Softener Model# CB-32D
 > Water Soft WSCB-32D is Autotrol 255 460i or Fleck 5600 SE
 > Technetic - Series 1010 Bypass Valve
 > 440 or 440i - Which Timer Assembly Do I Have - How to Tell
 > Air Check Autotrol Old 36F or Newer Style - How to Tell - How to Clean
 > 440i Sticking in Backwash or Brine Refill
 > Err 3 on 740,742,760, or 762 Logix Timer
 > WaterSoft G series and ISOBAR 2092
 > Hard water when Autotrol Valve is working and using Salt properly - By Passing the RESIN?
 > 440 or 440i or 460TC - Cycles controlled by the Camshaft used
 > Star Water Systems
 > 940 and 960 Timer Obsolete - Replacement Options when used on 255 Valve
 > Technetic 1000, Plus, 1100i replacement Valve Recommendation
 > Kinetico Systems are Proprietary
 > Air Check - Ball seated or dropping early during the BRINE/SLOW RINSE portion on the 155 or 255 Series Valve
 > 460TC or Logix 740 - Which Timer Replacement is Best?
 > 440 Upgrade to 760 metered demand Logix Timer - How?
 > Autotrol Date Codes - Serial Numbers
 > InAqua Valve = Model 9400
 > Water Right Sanitizer
 > Options - Rebuilding or Replacing your Autotrol 255/440 Valve
 > Calender Over Ride setting for 760 and 762 Logix Timer Programming
 > Backwash Plug and Injector Cap Removal Tool
 > 440 Tripper Arm Gear Repeatedly Breaking After Replacement.
 > 460TC Timer Off Set When Multiple Valves Used
 > NovRam, 460i and 460TC timers - What is the difference?
 > Ecowater proprietary models are 2000, 2002, 2200, 2500, 2502, 3000, 3002, 3200, 3500 Series and late model 2100 PF series, and we can't get most parts
 > Top Distributor Modifications - MD1203 used with Performa 263 and 268
 > Fittings Measurements Different Then Expected ( 1/4 and 3/8 fittings )
 > Autotrol 155 with 440 Upgrade to 740 Day timer or 760 metered demand Logix Timer - How?
 > Water Boss
 > Gears, Housing, Motor Inside the 460i and 460TC timers - What is the difference?
 > Autotrol 155 ( 1550-TC ) Valve Leaks - How to solve them
 > How To Repair A Logix Controller - Replacing Back Up Capacitor on the Board
 > Model 172 and 180 are Obsolete - Commercial Autotrol Valves and Parts
 > CSI Signature Series, and Water Soft WSCB-32D
 > Rayne Model RXD 1000 and 1500 Valve Replacement and Repair Parts ( Fleck ).
 > Fleck 5000 Mechanical Power Head and Timer Motor Obsolete
 > By Pass - Autotrol Old Style - Leaking When Connected to New Autotrol Valve
 > Screen shows 1.1 on 740,742,760, or 762 Logix Timer - Button Test Mode
 > Mermaid Valve - Uses Fleck 2500 parts
 > Can an Autotrol 255 valve be converted from softener use to filter ( carbon ) use?
 > Wolverine with Valve Body # 19773 parts available
 > Model 360, 363 and 368 Autotrol Valves and Parts
 > Turbulator - Why Would Someone Use This Over A Standard Bottom Distributor Basket / Riser Pipe?
 > 3 ways the Backwash cycle could be "blocked" in an Autotrol system
 > Brasswell Water Quality Systems - Jackson, Missouri
 > Autotrol 163 or 168 replacement Valve Recommendation is Performa 263 or 268
 > Autotrol 163 or 168 Rebuild Kits
 > 440 - 460 Output Gear Repeatedly Breaking After Replacement.
 > Autotrol 155 or 255 High Water in Brine Tank - Problem No Suction or Overflowing
 > Autotrol 155 or 255 - Injector Size / Color - Why BLUE is sometimes used on 8 inch tanks