Knowledge Base:  
440iHV, 460TC, 460i Timer Assembly WARRANTY Policy of Softenerparts.com
Last Updated: 12/31/2019
Full warranty policy for the 440iHV, 460TC, and 460i timer assemblies.

90 days free exchange warranty
We ship you a replacement (and pay postage to you)
Then you return the defective one in same box (and you pay for return postage to us)

91 - 365 day exchange warranty with $ 6.60 S & H fee ( you place a new order, and then get credit for ITEM upon return ).

***Remaining years 2 - 5 = parts warranty ( year 2 - 5, has 15% handling fee plus S & H fee ).

Also applies to timers purchased from some one besides us, but still under the 5 year date of manufacturer warranty ( date code is part of the SERIAL Number on the back of the Timer Assembly ).




OR
you might want to look at the Newest Option
....
Which is replacing the 440iHV .... is the -

Complete 460TC ( timer clock ... NOT metered ) with 12 volt transformer

for use with 120 volt 60 hz installations
Uses Electronic 7 Day programmed timer ( will regenerate on the DAYS you SET )
The 460TC replaces all previous 440 Timer Assemblies.

We can ship this timer assembly ( 460TC with Transformer ) as your Warranty Replacement for the 440iHV
Just order this one, and return the defective 440iHV for refund / credit.



Please Rate the Usefulness of this Article

Comments:
 

Related Articles
 > # 1 FAQ = High Water in Brine Tank - Problem -Softener does not remove the water from my salt tank or overflow
 > # 1 Shipping and Placing Order Questions: How to, When, How Long, From Where, What Methods
 > # 2 Pick Up at your Location ( store )?
 > # 3 RETURN Policy and Procedure
 > # 4 EMAIL QUESTIONS - Better than a PHONE call.
 > 3 ways the Backwash cycle could be "blocked" in an Autotrol system
 > 440 - 460 Output Gear Repeatedly Breaking After Replacement.
 > 440 or 440i - Which Timer Assembly Do I Have - How to Tell
 > 440 or 440i or 460TC - Cycles controlled by the Camshaft used
 > 440 Timer Rebuilding / Repair / fix Guide
 > 440 Tripper Arm Gear Repeatedly Breaking After Replacement.
 > 440 Upgrade to 760 metered demand Logix Timer - How?
 > 440i motor replacement guide
 > 440i Sticking in Backwash or Brine Refill
 > 460i Timer RESET if it is Regenerating EVERY NIGHT
 > 460TC or Logix 740 - Which Timer Replacement is Best?
 > 460TC Timer Off Set When Multiple Valves Used
 > 740 and 760 Logix Timer Programming Instructions
 > 940 and 960 Timer Obsolete - Replacement Options when used on 255 Valve
 > Account Set Up to place Order - How do I?
 > Air Check - Ball seated or dropping early during the BRINE/SLOW RINSE -Autotrol 155 or 255 Series
 > Air Check Autotrol Old 36F or Newer Style - How to Tell - How to Clean
 > APK5 - 255 Upper Valve Module - Brine Suction / Brine Tank Overflow after replacing the Top part of the Valve
 > Autotrol 155 ( 1550-TC ) Valve Leaks - How to solve them
 > Autotrol 155 or 255 - How to Tell Which You Have
 > Autotrol 155 or 255 - Injector Size / Color - Why BLUE is sometimes used on 8 inch tanks
 > Autotrol 155 or 255 High Water in Brine Tank - Problem No Suction or Overflowing
 > Autotrol 155 with 440 Upgrade to 740 Day timer or 760 metered demand Logix Timer - How?
 > Autotrol 163 or 168 Rebuild Kits
 > Autotrol 163 or 168 replacement Valve Recommendation is Performa 263 or 268
 > Autotrol Date Codes - Serial Numbers
 > Autotrol Valve Flow Rate Problem - Either Resin in Tank or Valve Discs not Opening Enough
 > Autotrol Valve Leaking to Drain after Replacing Valve Discs
 > Backwash Plug and Injector Cap Removal Tool
 > Backwash Plug Number - Autotrol How can I tell what number of backwash plug I need?
 > Brine Refill after Autotrol 155 or 255 Repair - Purge Air from the Valve head, Brine line & Air Check
 > Brine Refill Problem - No water in salt tank - Autotrol
 > By Pass - Autotrol Old Style - How to Use
 > By Pass - Autotrol Old Style - Leaking When Connected to New Autotrol Valve
 > Calender Over Ride setting for 760 and 762 Logix Timer Programming
 > Can an Autotrol 255 valve be converted from softener use to filter ( carbon ) use?
 > CANADA - Does Softenerparts.com ship to Canada
 > Err 3 on 740,742,760, or 762 Logix Timer
 > Firefox Browser preventing Check Out - Why - How to Fix
 > Fittings Measurements Different Then Expected ( 1/4 and 3/8 fittings )
 > Form W-9, Request for Taxpayer Identification Number (TIN) and Certification
 > Freeze Damage to Air Check Body Autotrol 255
 > Gears, Housing, Motor Inside the 460i and 460TC timers - What is the difference?
 > Hard water when Autotrol Valve is working and using Salt properly - By Passing the RESIN?
 > How do you order parts on your web page?
 > How To Repair A Logix Controller - Replacing Back Up Capacitor on the Board
 > Manufacturer Warranty on Valves, Timers, Control Boards, Meter Covers, and Complete Systems
 > Minimum Shipping and Handling for small items - Explanation
 > Model 172 and 180 are Obsolete - Commercial Autotrol Valves and Parts
 > Model 360, 363 and 368 Autotrol Valves and Parts
 > NovRam, 460i and 460TC timers - What is the difference?
 > Performa Valves Keep Breaking 440i Timers - Solution is...
 > Price Matching - Why it's not our policy
 > Sales Tax 7% for Sarasota County Florida
 > Screen shows 1.1 on 740,742,760, or 762 Logix Timer - Button Test Mode
 > Search for Part Number On Website - How do I?
 > Setting Time of Day with the Autotrol 440 Tripper Arm Gear 99F
 > Stolen Credit Card Information- someone made an unauthorized charge to card number after it was used on your website
 > Technetic - Series 1010 Bypass Valve
 > Technetic 1000, Plus, 1100i replacement Valve Recommendation
 > Top Distributor Modifications - MD1203 used with Performa 263 and 268
 > Turbulator - Why Would Someone Use This Over A Standard Bottom Distributor Basket / Riser Pipe?
 > U.K. Shipments, Taxes, and Handling Charges
 > Water Soft WSCB-32D water softener = Autotrol Valve Links
 > Where is my package - no tracking - delays - best methods
 > Wholesale Discounts to Water Conditioning Businesses - Our Policy
 > Why is new Venturi Nozzle Assembly wet and label coming off?