Please place Orders Online

Email Questions
support@softenerparts.com

Technical Support 7 days a week.




Softenerparts.com is a BBB Accredited Water Conditioning Equipment Store in Venice, FL
Knowledge Base:  
You are here: Knowledge Base > Fleck 5600 & 9000 Econominder
Fleck 5600 Econominder - Replacement - Repair Options
Last Updated: 04/29/2018
Metered valves we offer as a replacement for Fleck 5600 Econominder are:

1 ) Fleck 5600 Econominder Metered

2 ) Hankscraft mechanical metered valve

3 ) Hankscraft digital metered valve

Also reference guide to valve replacement steps:

***
And usually, if you HAVE a Fleck 5600 NOW... We recommend you Rebuild / Repair instead of replace.
Fleck Repair Parts:
How to Rebuild a Stuck Fleck 5600:
Checking the Fleck Meter and Setting it:


Please Rate the Usefulness of this Article

Comments:
 

Related Articles
 > # 1 FAQ = High Water in Brine Tank - Problem -Softener does not remove the water from my salt tank or overflow
 > Trouble Shooting Guide for the Fleck 5600 and 5600 Econominder Valve
 > STUCK Valve Fleck 5600 Rebuild Guide
 > Adapt New Valve to Smaller Pipe in Tank
 > Culligan Valve Replacement
 > Culligan Valve Replacement Question
 > Fleck 5600 parts rebuild with or without replacing the Timer Motor
 > Fleck 5600 Still Getting Stuck After Replacing the Pistons and Seals Kit
 > General Ionics Valve or Tank Replacement
 > How to Set Meter without the People or Hardness Labels on Fleck Econominder Valves
 > New Timer Motor 18743 kicks the unit into 'REGEN', but that's as far as it will go.
 > Refilling when it should Sucking Water out of Salt Tank ( Brine Rinse cycle ) Fleck Valve
 > Program Wheel replacement on Fleck 5600 Valve
 > Brine Failure on ONE Tank Only - 9000 / 9100 Twin Alternating Valve
 > Water Flowing to Salt Tank after replacing Brine Valve Piston Assembly Fleck part 60032
 > Fleck Valve Leaking to Drain Continuously
 > Switches Breaking Fleck 9000, 9100, or 9500 Valves
 > Tools Kit 60135-2510 for Service 1500, 2500, 2510 Seals & Spacers
 > MacClean McClean Mac Clean Mc Clean Valve
 > Continually Cycling ( Regenerating ) Problem - Fleck 9000, 9100, or 9500 Valve
 > 5600 Piston Assembly Types - Softener - Filter - Low Water
 > 5600 - Manual Regenerate - Cycle Times
 > Valve Replacements - How To Remove and Replace Valve Head on Water Softener Tank
 > Kinetico Systems are Proprietary
 > Brine Suction problem with Fleck 5600 or similar Hankscraft Valve
 > Brine Refill problem with Fleck 5600
 > Relieving Pressure Fleck 5600 Valve
 > Fleck 3600 Valve Obsolete but can be Replaced
 > Brine Cam Gear Sheared and Broken Off Plastic Housing Inside
 > Meter - Checking the Operation of the Fleck 3/4" Meter Cover
 > Meter - Cover Replaced, but Still not working..
 > 5600 - difference between metered, 12 day softener valve and Backwash ONLY
 > Photos 5600SE, 5600SXT, 6600, and 6700 - Which Kit or Pistons for these Electronic Timers
 > Fleck 5600 SE or SXT are NOT the same as Mechanical Versions of Fleck 5600
 > Fleck 5600 SE or SXT are NOT Recommended over Mechanical Fleck 5600
 > Top Distributor Modifications - MD1203 used with Performa 263 and 268
 > Fleck SE or SXT Error Codes
 > Meter - Leak at Cable Connection Hole on the Fleck 3/4" Meter Cover
 > Basic Installation Guide for New Water Softener
 > Fleck 24 volt AC transformer - Which to Choose
 > Fleck Valve - Greensand application - Purple Water After Regeneration
 > Sediment filter ahead of the softener - When, Why, and Which one.
 > BLFC button question 0.25 versus 0.50 gpm with Fleck
 > Fleck 3200 timer problems - if "stalling" or not "advancing".
 > Fleck Yoke Dimensions - Internal, External and Center To Center
 > Fleck 5600 - Power Head replacement - Standard in place of "L" Bracket
 > Fleck Piston 24507 - Fleck Model 5656 / 5665 UF are NOT the same as Mechanical Versions of Fleck 5600
 > Elan Water Care Water Softener UE-89
 > HANKSCRAFT H2O PRODUCTS and Replacement Valves
 > Valve Replacements - Fleck 8500 / Twinflo 100E with Fleck 9100 or a single valve / tank option
 > Fleck 2500 leak to drain - Reasons why valve is still leaking after replacing the Seals & Spacers ( 60021 )
 > Alternate Drain Fitting that comes with every Hankscraft Valve
 > Turbulator - Why Would Someone Use This Over A Standard Bottom Distributor Basket / Riser Pipe?
 > Meter Cable Length and Part Numbers for Mechanical Fleck Meter Covers / Models
 > Backwash Only Valve Replacement Options
 > Meter - Cover Replacement - How Long Should This Part Last?
 > Fleck 5600 Replacement Timer Motor - Life Expectancy
 > Pipe Joint Compound vs. Teflon Tape: Which is Best for Sealing Pipe Threads?
 > Pipe and Fitting Assembly Info - PVC Cement and Teflon Tape vs Pipe Thread Compound
 > MacClean CUNO Aqua Pure that used Fleck 5600 and Fleck 2500 parts
 > Motor Identification - How to determine Type and Part Number
 > Manufacturer Warranty on Valves, Timers, Control Boards, Meter Covers, and Complete Systems