Please place Orders Online

Email Questions
support@softenerparts.com

Technical Support 7 days a week.




Softenerparts.com is a BBB Accredited Water Conditioning Equipment Store in Venice, FL
Knowledge Base:  
You are here: Knowledge Base > Basic Valve Repair Topics
HANKSCRAFT H2O PRODUCTS and Replacement Valves
Last Updated: 07/21/2017

Hankscraft's Mission

Our company mission is to "Deliver value through innovation, creativity and diversification". It is simple, yet it guides everything we do.


Our history dates back to the 1920's. Since our beginning, we have established ourselves as a leader in manufacturing and distribution. Hankscraft entered into the water softener industry with manufacturing motors and components, in 1998.
Then in 2010, the H2O Products division was established with one goal in mind - to provide quality products and fair prices to water quality professionals. The H20 Group specializes in water softener equipment manufactured for the commercial/industrial and residential markets. Our core products include complete water softener systems, iron removal systems, descaling systems, mechanical and digital valves, RevV series rotary valves, media tanks, brine tanks, components and water softener valve rebuild kits. We didnít re-invent the valve-We kept the best aspects of the industry standard and coupled it with decades of manufacturing experience as a supplier to the water softener industry and consumer, and industrial markets.
For more about the company, see > https://www.hrh2o.com/about-us.php

Fleck 5600 and Hankscraft Equivalent Information.

Valves we offer from this company include:

Digital Metered Softener Valve Model HD-SMM

Metered Softener Valve Model HS-SMM

12 Day Timer Softener Valve Model HS-STC

Valve - 12 Day Timer Backwash only filter HS-FTC




Please Rate the Usefulness of this Article

Comments:
 

Related Articles
 > # 1 FAQ = High Water in Brine Tank - Problem -Softener does not remove the water from my salt tank or overflow
 > Distributor Failure in Bottom of Resin Tank
 > Low Pressure Through Softener On Chlorinated Water
 > Low Pressure Through Softener On Well Water
 > No Pressure Unless the Softener is By Passed
 > Average Salt Amount Needed and Normal Water Level In Brine Tank
 > Trouble Shooting Guide for the Fleck 5600 and 5600 Econominder Valve
 > STUCK Valve Fleck 5600 Rebuild Guide
 > Adapt New Valve to Smaller Pipe in Tank
 > Clogged Injector in Iron Filter
 > Culligan Valve Replacement
 > Culligan Valve Replacement Question
 > General Ionics Valve or Tank Replacement
 > How Long Until Water Feels Soft Again After Repair
 > Orange Sand Coming Into House
 > Refilling when it should Sucking Water out of Salt Tank ( Brine Rinse cycle ) Fleck Valve
 > Salt is Not Going Down. What could cause this problem?
 > Sears and GE Smartwater - Water Not Soft - Distributor Oring problem and solution
 > High Water in Brine Tank - Problems and Solutions
 > Tools Kit 60135-2510 for Service 1500, 2500, 2510 Seals & Spacers
 > Iron Filter, Greensand, MGS, Birm and Issues including Clogged Injector
 > MacClean McClean Mac Clean Mc Clean Valve
 > 5600 - Manual Regenerate - Cycle Times
 > Pump Pressure Low or Cycles OFF and ON ( Well Water )
 > Valve Replacements - How To Remove and Replace Valve Head on Water Softener Tank
 > Kinetico Systems are Proprietary
 > Brine Suction problem with Fleck 5600 or similar Hankscraft Valve
 > Brine Refill problem with Fleck 5600
 > Relieving Pressure Fleck 5600 Valve
 > Air Check - Ball seated or dropping early during the BRINE/SLOW RINSE portion on the 155 or 255 Series Valve
 > Fleck 3600 Valve Obsolete but can be Replaced
 > Why Gravel is Not Needed in Residential Size Water Softener
 > 5600 - difference between metered, 12 day softener valve and Backwash ONLY
 > Fleck 5600 SE or SXT are NOT Recommended over Mechanical Fleck 5600
 > Top Distributor Modifications - MD1203 used with Performa 263 and 268
 > Fittings Measurements Different Then Expected ( 1/4 and 3/8 fittings )
 > Basic Installation Guide for New Water Softener
 > Fleck 24 volt AC transformer - Which to Choose
 > Fleck Valve - Greensand application - Purple Water After Regeneration
 > Sediment filter ahead of the softener - When, Why, and Which one.
 > Brine Suction problem or High Water in Salt tank with Clack WS1 Valve
 > Fleck 3200 timer problems - if "stalling" or not "advancing".
 > Pressure Drop or Flow Rate reductions through a Water Softener / Filter System - Things to Consider
 > Fleck 5600 - Power Head replacement - Standard in place of "L" Bracket
 > Elan Water Care Water Softener UE-89
 > Valve Replacements - Fleck 8500 / Twinflo 100E with Fleck 9100 or a single valve / tank option
 > Fleck 2500 leak to drain - Reasons why valve is still leaking after replacing the Seals & Spacers ( 60021 )
 > Alternate Drain Fitting that comes with every Hankscraft Valve
 > MediaGuard filter on Distributor Tube can cause pressure loss
 > Cabinet Model Design - Pros and Cons
 > Backwash Only Valve Replacement Options
 > Fleck 5600 Econominder - Replacement - Repair Options
 > Pipe Joint Compound vs. Teflon Tape: Which is Best for Sealing Pipe Threads?
 > Pipe and Fitting Assembly Info - PVC Cement and Teflon Tape vs Pipe Thread Compound
 > MacClean CUNO Aqua Pure that used Fleck 5600 and Fleck 2500 parts