Please place Orders Online

Email Questions
support@softenerparts.com

Technical Support 7 days a week.




Softenerparts.com is a BBB Accredited Water Conditioning Equipment Store in Venice, FL
Knowledge Base:  
You are here: Knowledge Base > Fleck 5600 & 9000 Econominder
Fleck SE or SXT Error Codes
Last Updated: 09/23/2019

The Electronic Fleck Valves ( SE and newer SXT ) ERROR Codes




* Many of the parts are different between the electronic and mechanical versions.
As examples, see the Fleck 5600 Downflow and Upflow manuals linked below.
see / download common version ( downflow brining ):

Or if you have the "upflow" ( rare ),
this manual,

For other parts available for the 5600 SE and Various SXT controllers see:

SE and SXT controllers

And finally,
NOTE: We do not recommend the Fleck SE or SXT timers, but rather the mechanical versions.
See WHY http://www.softenerparts.com/kb_results.asp?ID=172



Please Rate the Usefulness of this Article

Comments:
 

Related Articles
 > # 1 FAQ = High Water in Brine Tank - Problem -Softener does not remove the water from my salt tank or overflow
 > Trouble Shooting Guide for the Fleck 5600 and 5600 Econominder Valve
 > STUCK Valve Fleck 5600 Rebuild Guide
 > Fleck 5600 parts rebuild with or without replacing the Timer Motor
 > Fleck 5600 Still Getting Stuck After Replacing the Pistons and Seals Kit
 > How to Set Meter without the People or Hardness Labels on Fleck Econominder Valves
 > New Timer Motor 18743 kicks the unit into 'REGEN', but that's as far as it will go.
 > Refilling when it should Sucking Water out of Salt Tank ( Brine Rinse cycle ) Fleck Valve
 > Program Wheel replacement on Fleck 5600 Valve
 > Brine Failure on ONE Tank Only - 9000 / 9100 Twin Alternating Valve
 > Water Flowing to Salt Tank after replacing Brine Valve Piston Assembly Fleck part 60032
 > Fleck Valve Leaking to Drain Continuously
 > Switches Breaking Fleck 9000, 9100, or 9500 Valves
 > Tools Kit 60135-2510 for Service 1500, 2500, 2510 Seals & Spacers
 > Continually Cycling ( Regenerating ) Problem - Fleck 9000, 9100, or 9500 Valve
 > 5600 Piston Assembly Types - Softener - Filter - Low Water
 > 5600 - Manual Regenerate - Cycle Times
 > Brine Suction problem with Fleck 5600 or similar Hankscraft Valve
 > Brine Refill problem with Fleck 5600
 > Relieving Pressure Fleck 5600 Valve
 > Fleck 3600 Valve Obsolete but can be Replaced
 > Brine Cam Gear Sheared and Broken Off Plastic Housing Inside
 > Meter - Checking the Operation of the Fleck 3/4" Meter Cover
 > Meter - Cover Replaced, but Still not working..
 > 5600 - difference between metered, 12 day softener valve and Backwash ONLY
 > Photos 5600SE, 5600SXT, 6600, and 6700 - Which Kit or Pistons for these Electronic Timers
 > Fleck 5600 SE or SXT are NOT the same as Mechanical Versions of Fleck 5600
 > Fleck 5600 SE or SXT are NOT Recommended over Mechanical Fleck 5600
 > Meter - Leak at Cable Connection Hole on the Fleck 3/4" Meter Cover
 > Fleck 24 volt AC transformer - Which to Choose
 > Fleck Valve - Greensand application - Purple Water After Regeneration
 > BLFC button question 0.25 versus 0.50 gpm with Fleck
 > Fleck 3200 timer problems - if "stalling" or not "advancing".
 > Fleck Yoke Dimensions - Internal, External and Center To Center
 > Fleck 5600 - Power Head replacement - Standard in place of "L" Bracket
 > Fleck Piston 24507 - Fleck Model 5656 / 5665 UF are NOT the same as Mechanical Versions of Fleck 5600
 > Valve Replacements - Fleck 8500 / Twinflo 100E with Fleck 9100 or a single valve / tank option
 > Fleck 2500 leak to drain - Reasons why valve is still leaking after replacing the Seals & Spacers ( 60021 )
 > Turbulator - Why Would Someone Use This Over A Standard Bottom Distributor Basket / Riser Pipe?
 > Meter Cable Length and Part Numbers for Mechanical Fleck Meter Covers / Models
 > Backwash Only Valve Replacement Options
 > Fleck 5600 Econominder - Replacement - Repair Options
 > Meter - Cover Replacement - How Long Should This Part Last?
 > Fleck 5600 Replacement Timer Motor - Life Expectancy
 > Motor Identification - How to determine Type and Part Number