Knowledge Base:  
Photos 5600SE, 5600SXT, 6600, and 6700 - Which Kit or Pistons for these Electronic Timers
Last Updated: 04/04/2020

The Electronic Fleck Valves ( 5600SE, SXT, 6600, 6700, etc ) use Special Valve Bodies and matching Special Main Piston Assemblies.


And the 3456PSKIT will not work to rebuild the 5600SE valve ( or SXT, or 6600, or 6700 ) because the piston with that kit is different than the one used for the Electronically controlled valves..
However, the Seals and Spacers and the Brine Valve Piston are the same (see below).
And we do have an SXT KIT ( 60102-71, 60125, 60032 ).

The piston can either be the Downflow with GREEN End Plug 60102-71

Or the Upflow with Oval Linkage instead of Triangle 60102-62

The Seals and Spacers Kit is the same:
Kit 60125

And the Brine Valve Piston is the same:
Assembly 60032

For other parts available for the 5600SE and other "Electronic" Fleck Valves,
see:
Search List 5600SE parts

Fleck 5600SE shown below,



Fleck 5600SXT shown below,



Fleck 6600 shown below,



Fleck 6700 shown below,





Please Rate the Usefulness of this Article

Comments:
 

Related Articles
 > # 1 FAQ = High Water in Brine Tank - Problem -Softener does not remove the water from my salt tank or overflow
 > 5600 - difference between metered, 12 day softener valve and Backwash ONLY
 > 5600 - Manual Regenerate - Cycle Times
 > 5600 Piston Assembly Types - Softener - Filter - Low Water
 > Backwash Only Valve Replacement Options
 > BLFC button question 0.25 versus 0.50 gpm with Fleck
 > Brine Cam Gear Sheared and Broken Off Plastic Housing Inside
 > Brine Failure on ONE Tank Only - 9000 / 9100 Twin Alternating Valve
 > Brine Refill problem with Fleck 5600
 > Brine Suction problem with Fleck 5600 or similar Hankscraft Valve
 > Continually Cycling ( Regenerating ) Problem - Fleck 9000, 9100, or 9500 Valve
 > Fleck 24 volt AC transformer - Which to Choose
 > Fleck 2500 leak to drain - Reasons why valve is still leaking after replacing the Seals & Spacers ( 60021 )
 > Fleck 3200 timer - Brine Refill Rate Explained
 > Fleck 3200 timer problems - if "stalling" or not "advancing".
 > Fleck 3600 Valve Obsolete but can be Replaced
 > Fleck 5600 - Power Head replacement - Standard in place of "L" Bracket
 > Fleck 5600 Econominder - Replacement - Repair Options
 > Fleck 5600 parts rebuild with or without replacing the Timer Motor
 > Fleck 5600 Replacement Timer Motor - Life Expectancy
 > Fleck 5600 SE or SXT are NOT Recommended over Mechanical Fleck 5600
 > Fleck 5600 SE or SXT are NOT the same as Mechanical Versions of Fleck 5600
 > Fleck 5600 Still Getting Stuck After Replacing the Pistons and Seals Kit
 > Fleck Piston 24507 - Fleck Model 5656 / 5665 UF are NOT the same as Mechanical Versions of Fleck 5600
 > Fleck SE or SXT Error Codes
 > Fleck Valve - Greensand application - Purple Water After Regeneration
 > Fleck Valves - LEAKS out the DRAIN HOSE
 > Fleck Yoke Dimensions - Internal, External and Center To Center
 > How to Set Meter without the People or Hardness Labels on Fleck Econominder Valves
 > Meter - Checking the Operation of the Fleck 3/4" Meter Cover
 > Meter - Cover Replaced, but Still not working..
 > Meter - Cover Replacement - How Long Should This Part Last?
 > Meter - Leak at Cable Connection Hole on the Fleck 3/4" Meter Cover
 > Meter Cable Length and Part Numbers for Mechanical Fleck Meter Covers / Models
 > Motor Identification - How to determine Type and Part Number
 > New Timer Motor 18743 kicks the unit into 'REGEN', but that's as far as it will go.
 > Program Wheel replacement on Fleck 5600 Valve
 > Refilling when it should Sucking Water out of Salt Tank ( Brine Rinse cycle ) Fleck Valve
 > Relieving Pressure Fleck 5600 Valve
 > STUCK Valve Fleck 5600 Rebuild Guide
 > Switches Breaking Fleck 9000, 9100, or 9500 Valves
 > Tools Kit 60135-2510 for Service 1500, 2500, 2510 Seals & Spacers
 > Trouble Shooting Guide for the Fleck 5600 and 5600 Econominder Valve
 > Turbulator - Why Would Someone Use This Over A Standard Bottom Distributor Basket / Riser Pipe?
 > Valve Replacements - Fleck 8500 / Twinflo 100E with Fleck 9100 or a single valve / tank option
 > Water Flowing to Salt Tank after replacing Brine Valve Piston Assembly Fleck part 60032