Please place Orders Online

Email Questions
support@softenerparts.com

Technical Support 7 days a week.




Softenerparts.com is a BBB Accredited Water Conditioning Equipment Store in Venice, FL
Knowledge Base:  
You are here: Knowledge Base > General questions - Water Treatment
How a water softener actually works and why does it feel slimy
Last Updated: 03/17/2018

How does my water softener actually work?

1. See Water Softener Basics

Why does soft water feel slimy or slick in the shower? ( or what we like to call "silky" ).

1. Water that has been conditioned by a water softener allows soap to dissolve more completely than in hard water. It is common for first time users of soft water to have a slimy experience in the shower. This is due to using more soap than is necessary. The amount of soap needed to lather up is very small in soft water. This is one of the benefits of soft water ( less soap is needed in the bathing, laundry, and household cleaning ). Also, the pores of your skin will no longer be clogged by the undissolved soap. Once a person has adjusted their soap usage and is used to the smooth clean feeling achieved by bathing in soft water, they will have a negative "rough" feeling, if they bathe in hard water again.



Please Rate the Usefulness of this Article

Comments:
 

Related Articles
 > # 1 FAQ = High Water in Brine Tank - Problem -Softener does not remove the water from my salt tank or overflow
 > Links to Other Websites
 > How and Why to use Acid Neutralizing Media Calcite and Corosex ( Magnesium Oxide )
 > No Pressure Unless the Softener is By Passed
 > Average Salt Amount Needed and Normal Water Level In Brine Tank
 > Salt Usage In Water Softening
 > No Salt Systems for Water Softening
 > Dishwasher Glassware Etching Cause Explained
 > Air in water lines after Softener Regenerates
 > Common Water Problems
 > ECO - Friendly Alternative to SALT Softeners
 > How do you determine if you actually need a softener?
 > How do you put a softener out of service without damaging it?
 > How Long Until Water Feels Soft Again After Repair
 > Hydrogen Sulfide levels affected by amount of water used and the ground water table
 > Will a Water Softener remove the iron from my water?
 > Iron Staining and my Water Softener seems to be working okay, Why is that?
 > Odor - Sulfur (Hydrogen Sulfide) in your water
 > I have a Water Softener, but I still have odor in my water. Why is that?
 > Orange Sand Coming Into House
 > Salty Water Taste in the Morning
 > High Water in Brine Tank - Problems and Solutions
 > Sodium in the Water Softening
 > What Brine ( Salt ) Setting Amount to Use?
 > Will a Water Softener make my water safe to drink?
 > Stains in Laundry - several possible causes
 > Looking for someone to Service My Water Softner ( Softener ) in my area.
 > Pump Pressure Low or Cycles OFF and ON ( Well Water )
 > Stinky - Rotten Egg - Odor
 > Sodium Levels in Water when Softened
 > Air Check inside Brine Tank can becomes Stuck or Water Logged
 > Aerator Use and Cleaning Q & A
 > Air Check - Ball seated or dropping early during the BRINE/SLOW RINSE portion on the 155 or 255 Series Valve
 > Brine Valve Replacement in Salt tank ( with Float Shut Off )
 > UV for Water Purification - Does it Work?
 > Why Gravel is Not Needed in Residential Size Water Softener
 > Frequency of Regeneration - How Often Should Softener Recharge?
 > Fittings Measurements Different Then Expected ( 1/4 and 3/8 fittings )
 > Choosing a Resin - What is the Difference
 > Basic Installation Guide for New Water Softener
 > Which is better or cheaper... Powdered Resin Cleaners or Res-Up Liquid?
 > Choosing a Softener System - Which Brand is Best?
 > Sediment filter ahead of the softener - When, Why, and Which one.
 > Brine Tank Assembly - Questions, Answers, Video Link
 > ChemTech and Pulsafeeder chlorine solution pumps
 > Potassium Chloride - Substitute for Salt ( Sodium Chloride )
 > Pressure Drop or Flow Rate reductions through a Water Softener / Filter System - Things to Consider
 > Recommendation of Fleck 5600 Econominder and Hankscraft Equivalent water softener replacement valves - Which Brand is Best?
 > How does Hankscraft metered valve compare with the Fleck 5600 or the Hankscraft digital unit in terms of lasting durability
 > MediaGuard filter on Distributor Tube can cause pressure loss
 > AIR INJECTION OXIDIZING FILTER SYSTEM = AIO
 > Do I need an Iron Filter?
 > Salty Water Taste - New Valve Installation
 > Motor Identification - How to determine Type and Part Number
 > Irrigation - Iron Removal options