3/8 x 3/8 inch elbow w/ steel grippers 506NSG

Your Price: $4.50

3/8" X 3/8" connecting ELBOW with steel grippers for connection 3/8" brine tubing to Air Check Brine Pickup J-Tube 3/8 " ( FP60002 - sold separately )

Part Number: JF506NSG

Availability: IN STOCK

Quantity

Description

3/8" x 3/8" connecting ELBOW with steel grippers for connection 3/8" brine tubing to Air Check Brine Pickup J-Tube 3/8 " ( FP60002 - sold separately ).

Please take special care when unscrewing the 3/8" elbow and NOTE the order of the parts.. especially the steel grip washer.
When putting on to the brine pick up rod or your tubing, you want to slide the Nut on first, and then the steel grip washer with grips facing away from nut ( or outward ).
It's the logical direction, as it would be nearly impossible to put the steel grip washer on "backwards", as the "grips" would not let you slide it that way.
Only slide steel grip on 1/4", and then the white tapered ferrule ring, with flat side against the steel grip right ( and tapered or beveled side of white ferrule right towards the elbow threads.
Now you are ready to tighten the nut to the elbow.
And please note, it's extremely difficult ( if not impossible ) to "re-use" these fitting that use the steel grip washer, as they don't come off once the washer is slide on and "grips" the tube they are attached to.
That is what makes them better than the standard "Jaco" or "compression" plastic elbow.

3/8" OD Black Tubing sold by Foot

$0.49

IN STOCK

Add To Cart

Brine Pick Up Tube with Screen

$23.50

IN STOCK

Add To Cart

Brine Safety Float Pickup Tube BP1002

$50.00

Not for Sale.

Brine Pick Up Tube with Air Check 60002

$24.95

IN STOCK

Add To Cart

3/8 x 3/8 inch elbow w/ steel grippers 506NSG

RELATED PRODUCTS...