Hankscraft Digital Metered Softener Controlled Valve,
Metered Demand Control. 120 volt 60 Hz with 24 volt 60 Hz Transformer included.
Programmable and Adjustable cycle times available with this advanced electronically controlled valve.
Defaults to industry standard settings, but allows you full control of valve operation. Allowing you to tailor the cycle times and water used to best fit your application.
And if you don't want to "mess" with those details, just set the Capacity, Hardness, and Time of Day for automatic operation.
If this Valve is to replace an existing Fleck 5000, 5600, 2510 or newer Rainsoft ( with Black Noryl body ) valve, then the existing By Pass or Piping Yoke will clip on to this replacement valve.
Otherwise you will NEED either a standard Noryl plastic piping connection in either 3/4" or 1" with all valves purchased,
OR a By-Pass Option can be purchased separately.
We include at no extra charge, a new distributor kit. This is part # MD1236. It is a plastic lower screen which can be cemented to a piece of 3/4" PVC pipe to construct a new distributor tube. Your old distributor could be slightly smaller than the ones now used by both Fleck and Autotrol ( old size 13/16", new size 1.05" outer diameter ).
We also include a 1.05 Top Distributor Twist On - part # MD1203 at no charge.
< How to Replace Your Old Valve >
Tank Diameter - How To Measure and Why
Manufacturer HD Series Specification InformationDownload HD Series Service Manual
