Valve - Fleck 2750 12 Day Timer Softener

Fleck 2750 with 12 Day Softener Control Valve 120 Volt 60 Hz.

Cover EXTRA. Default is "No Valve Cover", unless you select the Environmental Cover.

NOTE: Uses optional Environmental Cover shown as Related Item and you can SELECT as option when ordering the Valve.

DLFC ( drain line flow control ) Included and based on Tank Diameter you select.

You can select 3/8" 1600/1650 Brine Valve and Injector.
Or larger, 1/2" 1700/17100 Injector and Brine Valve, but must pick one of the other.
The larger 1700/1710 ( 1/2" ) is RARE with the 2750 Valve and most common is the 3/8" 1600/1650.

* NOTE: Fleck now shipping the 3/8" brine valves using the plastic 1650 and not the brass 1600.

* NOTE: Fleck now shipping the 1/2" brine valves using the plastic 1710 and not the brass 1700.

Uses Environmental Cover shown in Related Products and not the old style held by 2 thumb screws.
Uses optional Drain Line Flow Control of 3/4"
or for higher backwash flow rates, the 1" version ( requires bushing to attach to valve ) currently $ 25.00 extra.
Email if you have questions about this.
If replacing an existing valve, you can re-use your DLFC.

# Valve Material: Lead Free Brass # 1" In/Out Connections # Continuous Flow: 26 GPM # Peak Flow: 33 GPM # Hard Water Bypass Piston is Standard (no hard water bypass is available upon request) # 2 1/2" NPT Thread Type tank connection

NOTE: International Voltage ( 230 volt and 50 Hz ) is Special Order with 2 week Lead time before order is Shipped

Also SPECIAL Order -- 2 to 3 week lead time is:
NHWBP option includes the 1710 Brine Valve Piston assembly, special brine tube, and special Main Piston that is NHWBP ( no hard water by pass -- prevents any water flow while valve is in regeneration .. No Water ).