MODELS 1500, 2510, 2750, & 5600
60405-10 PROGRAM WHEEL, W/3/4” STANDARD LABEL (0-2,100 GALLONS)
60405-20 PROGRAM WHEEL, W/3/4” EXTENDED LABEL (0 - 10,500 GALLONS)
MODELS 2750, 2850, & 2850S
60405-30 PROGRAM WHEEL, W/1” STANDARD LABEL (0 - 5,100 GALLONS)
60405-40 PROGRAM WHEEL, W/1” EXTENDED LABEL (0 - 25,500 GALLONS)
MODELS 2850, 2850S, 2900, 2900S, & 3150
60405-20 PROGRAM WHEEL, W/1-1/2" STANDARD LABEL (0 - 10,500 GALLONS)
60405-70 PROGRAM WHEEL, W/1-1/2” EXTENDED LABEL (0 - 50,000 GALLONS)
MODELS 2900, 2900S, 3150, & 3900
60405-50 PROGRAM WHEEL, W/2” STANDARD LABEL (0 - 21,000 GALLONS)
60405-60 PROGRAM WHEEL, W/2” EXTENDED LABEL (0 - 100,000 GALLONS)
Most Residential applications use the 0 - 21 x 100 ( 2,100 gallon ) Range as shown in photo.
All other ranges have a
$ 10.00 Surcharge.
The entire program wheel should be moving in relationship to the ARROW as your water is used.
Once the ARROW is pointing to ZERO, the unit will regenerate at 2 a.m.
If you are having a
problem with the WHITE dot moving from the Number it is set to, then you'll need to replace the program wheel because it is broken.
The clear portion is "locked" into the black portion by 3 small "teeth" that can break.
*******************
How to Set Meter without the People or Hardness Labels on Fleck Econominder ValvesNOTE: To replace the Program Wheel, you'll have to remove the Front Knob, and parts underneath it first.
There are 2 ball bearings under the program wheel ( not shown in diagram ), so don't loose them.
Best to remove the power head ( drive assembly ) from the Valve Body, and work on a table with "face" UP.
and see
Exploded Diagram
Also see this FAQ article > Program Wheel Replacement Fleck 5600
Video showing how to "adjust" the Program Wheel Gallons Setting.
