Spring Retianer - Clip For Meter Cable Assembly inside control valve.
Holds spring ( 14276 ) and ratchet gears ( clutch, 13831, and pinion, 13830 ) in place.
Cable connects through this Clip.
Then to the "Clutch" ( with a spring on the shaft and clip to apply pressure ).
Then the "clutch" drives the "Pinion" gear, that in turn moves the Program Wheel ( on the front of the control ).
To Remove Cable from the meter cover, just pull up.
To Remove Cable from the Control Valve,
Use your thumb nail on your right hand to hold the "meter cable clip
" down ( secure to control ), and then pull the cable with your left hand. It will come right out.