Meter Cable for Fleck 5600 Econominder.
Length = 8.25 inches
To Remove Cable from the meter cover, just pull up.
To Remove Cable from the Control Valve,
Use your thumb nail on your right hand to hold the "
meter cable clip" down ( secure to control ), and then pull the cable with your left hand. It will come right out.
****
Clip For Meter Cable Assembly inside control valve.
Holds spring ( 14276 ) and ratchet gears ( clutch, 13831, and pinion, 13830 ) in place.
Cable connects through this Clip.
Then to the "Clutch" ( with a spring on the shaft and clip to apply pressure ).
Then the "clutch" drives the "Pinion" gear, that in turn moves the Program Wheel ( on the front of the control ).
