Brass 3/8" Brine Fitting (B.L.F.C. ) used on Fleck 5000, 5600, and 9000 valves.
Includes O-ring 12977
BLFC Button ( 0.25, 0.50 or 1.0 gpm ) and BLFC Retainer sold separately.
We do not sell as "assembly" ( i.e. the part number 60022-25, 60022-50, or 60022-100 ),
but you can order:
the brass fitting ( 13244 ),retainer
( 13245 ),
button ( 0.25, 0.50 or 1.0 GPM ) to "make" the complete assembly.
To REMOVE the BLFC,
This is inside the brass fitting on the side of the Valve Head.
Unscrew the brine tubing
Unscrew the brass fitting from the valve head.
Remove the BLFC Retainer ( pull hard with needle nose pliers ),
to access the "button".
Check the Center Hole for any debris ( piece of sand ).
REPLACING the BLFC Button ---
Numbers "towards" the valve body, or "up" in the BLFC retainer, when inserting back into the Brass Fitting.