Autotrol 255 Upper Valve Body Replacement without Timer Assembly ( your old 440, 440i, 440iHV or 460NovRam, 460i timer, 460TC, and camshaft will all work with the 24NC ) .
It would be the PN 1000232 only WITH all Valve Body flow controls and Valve Disc installed / included. Just slide your old 400 series timer and camshaft into place.
Would work as the replacement for old 155 valve bodies, 24N, or 155A77. And of course any older 255 Valve Body, PN 1000232 ( first sold in late 1995 ).
Also includes new style cover, which will require slight modification ( cut a little off ) when used with tank adapters that have the 36F Air Check ( pre-1994 models of 155 ).
|You can replace your old Autotrol 155 ( 1550-TC ) |
or 255 model water softener
upper valve body with this module.
| No plumbing required.|
| The upper valve body separates by removing one screw|
and the red locking bar ( sliding it out ).
Read Easy To Follow Directions
Or WATCH this How To VIDEO
| The new module is the advanced 255 design ( the 155 was updated in late 1995 ) |
and includes new o-rings for mounting to your tank adapter ( the part which connects to your resin tank, your plumbing, and your brine air check assembly ).
| This is the complete upper body with all new flapper valves,|
injector, screens, & brine control.
BUT NO TIMER ASSEMBLY OR CAMSHAFT
| Add another 10 -20 years of life to your water softener |
( the resins, and tanks will last 40+ years under normal conditions ).
|Your Timer Assembly and Camshaft fit on the new 255 Upper Valve Module |
|Order: The K-5 Upper Module |
( With 460TC Timer assembly, Cam shaft, and New Cover )
| * Please specify the diameter of the resin tank your valve is attached to now, when ordering. *See "How to Measure and Why It Matters".|