Camshaft used for Autotrol 155 & 255 water softener control valves.
Newest part # 1031950, Standard One-Piece. ( also cross reference AT1035625 )
It has the number 155C174 in small raised lettering on it.
The length of all 155 and 255 camshafts are 6 inches ( not including the "tips" that engage the timer and rear bearing ).
Works with 400 Series Timers ( 440, 440i, 440iHV, 460NovRam, 460i, and 460TC ) that are configured to be water softener application.
NOTE: Many older systems used a White Segmented Camshaft. This one-piece black is the replacement if your valve is used on a water softener.
Iron filter and Backwash only Camshafts are modified versions of this.
To make Backwash Only:
Cut off the two "lobes" of the # 1 Cam ( Brine Cam ).
This would eliminate the Suction ( brine rinse ) and Refill cycles, since the # 1 Valve Disc would never be opened.
* Article of Cycle Timers when this Camshaft is used = 440 or 440i or 460TC - Cycles controlled by the Camshaft used