A Pair of 1" I.D. PVC Tubes, Large nuts, and Gaskets ( part # 54F ).
Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass.
Commonly used with Autotrol 155 and 255 By Pass valves.
Alternate part # 1001614 or AT10-PVC
( 2 ) Gray PVC Tubes 1" I.D. piping size = Old PN 156A232 ( newer PN 1030579 )
( 2 ) Nuts O.D. = 2 3/16" and threaded area I.D. = 1 5/8" = Old PN 56F-1 or 156A43 ( newer PN 1030567 )
( 2 ) Gaskets 1030541 = Old PN 54F or 54F-1 or really old PN 156A31 ( newer PN 1030541 )
Only the Gaskets ( 54F, 1030541 ) are available separately.
Not the Nuts
Not the tubes
Sold only in this Kit with a pair of each item.
Note: In newer Autotrol manual's they call these adapters "CPVC", but they really only fit PVC pipe sizes.
They ( Autotrol ) does not have any for CPVC size adapaters.
This is a grave inaccuracy in their manual's parts listing.
If you have CPVC pipe, then you will need to use a PVC to CPVC adapter or bushing, ( available from any plumbing supply outlet ).