New Style Output Connector used to connect to CamShaft on the 440i & 460i & 460TC Timer Assembly.
Used on all 255, 263, 268 timer assemblies.
Part Number 1001833.
Does not use C - Clip, is made to be used on 440i or 460i or 460TC Back Plates that have a slot for the "arrow" to slide through from front of timer to back of timer housing.NOTE: Older 21E are white, some later models were black in color.
If your out put connector uses a metal C-clip then it was PN 21E and not this part ( 1001833 ).
This newer version is made to work with 440i and 460i and 460TC designed "back plates".
It could be modified as a replacment for 21E,
Customer Feedback after SUBSTITUTING the 1001833 as replacement for 21E,
Thank you very much. Just so you know. The shaft fits perfectly. I bought the AP1001833 but needed the 21E. The only difference is a small arrow like on the end of the shaft. I simply filed it off, making it slide through the timer case. It works perfectly.. Thank you so much.
Replacement will require removing the Out Put Connector from the inside of your timer assembly. The out put connector is FIRMLY JAMMED into the Out Put Gear with spring inside.
They can be separated with some prying of the two parts.
We don't have a diagram for the 440i, but the older 440 shown here can still be used as a guide. Click to Enlarge Diagram