Water Boss
Do you have any parts for the water boss 900?
Sorry, but no.
Water Boss is a proprietary system in all aspects ( all parts ).
And we can not provide any parts for it.
They are "cute" and relatively inexpensive, until is time to try to get parts or service ( none local ).
You must deal directly with the manufacturer.
http://www.waterboss.com/partsservice.shtml
Also, please note, that when a system only regenerates with 3 lbs. of salt, it is not going to have the "capacity" rating advertised ( usually only 30 - 40% ). And when the hardness is above 20 grains or iron above 1 ppm, the system will not work properly on this minimum salt setting. And lastly, the lowest salt setting, will give the fewest gallons of soft water between regeneration, and require more frequent regenerates.
For more about Salt Dosage and Resin Capacity,
see:
What Brine ( Salt ) Setting Amount to Use?
And the use of carbon filtering inside the water softener tank is not a long lasting method, and we therefore recommend against this type of system.
see:
Adding Carbon to Resin in same Tank - Not Recommended
Also, please note, that when a system only regenerates with 3 lbs. of salt, it is not going to have the "capacity" rating advertised ( usually only 30 - 40% ). And when the hardness is above 20 grains or iron above 1 ppm, the system will not work properly on this minimum salt setting. And lastly, the lowest salt setting, will give the fewest gallons of soft water between regeneration, and require more frequent regenerates.
For more about Salt Dosage and Resin Capacity,
see:
What Brine ( Salt ) Setting Amount to Use?
And the use of carbon filtering inside the water softener tank is not a long lasting method, and we therefore recommend against this type of system.
see:
Adding Carbon to Resin in same Tank - Not Recommended