Home > Parts and Valves > Autotrol / Osmonics > New Valves >

Valve - 760 Logix Electronic 255 Metered Softener Control

Valve - 760 Logix  Electronic 255 Metered Softener Control
 
Your Price: $330.00

Availability: IN STOCK
Product Code: AV255760I


The following items are included with this product:


Tank Diameter Required

Diameter of Tank*:

Voltage

Voltage Options*:
120 volt / 60 Hz Standard USA
230 volt / 50 Hz International World Board [Add $30.00]
Piping Options

Connection*:
NONE = No Yoke - O-rings 255 Autotrol
3/4 Inch female thread piping yoke plastic ( PN=AP1040279 ) [Add $13.95]
By Pass valve Autotrol 256 ( AP1040769 ) [Add $32.95]
Installation Location

Indoor Installation ( open face, + transformer AP44149 )
Outdoor Installation ( covered face, + transformer AP44156 )
230 volt 50/60 Hz ( transformer 1000814 )

Qty:  
Description Extended Information
 
760 Logix Electronic Meter Control Timer Assembly on the Autotrol 255 Softener Valve.
* All complete valves come with top of tank and riser / distributor o-rings., but REAR connections are separate options you must select if not replacing with similar model.

You can select to purchase the valve with 3/4" Piping Boss, or New BY PASS 256 ( note: adapter kit NOT included with By Pass, and if you need them with By Pass ( not needed with Piping Boss ), you will need to purchase separately ).
Or you can select to purchase just the valve and use your existing Piping Boss or By Pass when replacing a similar Autotrol model 255 or even the older 155 ( as the rear connections line up the same ).

The 255/760 computer/demand control system combines design simplicity with reinforced NORYL construction to provide you with an uncommonly reliable appliance. The inherent reliability for the system means a long life of efficient, trouble-free, uninterrupted soft water luxury
Should maintenance become necessary, the Series 255 offers a unique "separation" capability. Other components, such as the computer control, are modular, making it by far the most home-owner friendly valve on the market.

Here's a few of the key features of the 255 valve:
  • Single motor provides all the power to turn camshaft - no solenoids are needed!
  • Unique camshaft / flapper valve design - no dynamic seals (such as piston and seal or rotary discs) that could cause leakage through wear or fatigue.
  • Built-in brine control valve - no external brine float needed!
  • Direct acting system functions independent of water pressure. No pistons or diaphragms that require a minimum water pressure to operate.
  • Valve may be indexed manually without power in the event of an extended power outage.
The two key features of the 760 Logix demand system are the microprocessor, and a water meter located on the valve outlet. The flow of soft water through the turbine meter generates electrical impulses that tell the computer the amount of water being used. Every day, at 2:00 am, the past 7 days' water usage is statistically analyzed to anticipate the amount of water that will be used the next day. The computer then determines if the softener has enough remaining capacity to supply the next day's needs - if not, the unit will regenerate. If the water usage pattern changes, the computer automatically compensates for the change and regenerates only when needed. This results in higher operating efficiency and lower salt usage compared to other systems.

Here's a few of the key features of the 760 Logix computer control softener valve:
  • Only one moving part - the turbine in the water meter. No reduction gears like other units!
  • NOVRAM chip retains programming information in the event of a power outage.
  • Self-adjusting reserve - keeps it to a minimum for optimum efficiency.
  • Flow indicator flashes whenever water is flowing through the valve.
  • Calendar override feature can be programmed to initiate a regeneration at a fixed interval if water usage has not been enough to trigger it - beneficial on iron-bearing water.
Includes:
5 year parts warranty, owners/service manual, and our technical support number included with each new valve.

< How to Replace Your Old Valve >

Tank Diameter - How To Measure and Why

Link to Programming GUIDE

Quick Start Programming Video =https://www.youtube.com/watch?v=epljZD9SaA4

Related Products...

By Pass Adapter Gasket 54F - 1030541 Timer - 762 Logix World Electronic Metered Control 50 or 60 HZ Adapter Kit - 1" PVC Tubes - 1040393, 1001614 Valve - 760 Logix Electronic 255 Metered Softener Control
Your Price: $1.00

Add
Your Price: $235.00

Add
Your Price: $23.95

Add
Your Price: $330.00

Add
By Pass Adapter Gasket 54F - 1030541 Timer - 762  Logix World  Electronic Metered  Control 50 or 60 HZ Adapter Kit - 1" PVC Tubes - 1040393 Valve - 760 Logix  Electronic 255 Metered Softener Control
Valve - 255 Autotrol 740 Logix Day Timer Softener Control Adapter Kit - 3/4" PVC Tubes - 1040392 - New PN 1001613 Adapter Kit - 1" Copper Tubes Transformer Universal 230 Volt to 12 Volt AC - 1000814
Your Price: $269.00

Add
Your Price: $23.95

Add
Your Price: $25.00

Add
Your Price: $19.95

Add
Valve - 255 Autotrol 740 Logix Day Timer Softener Control Adapter Kit - 3/4" PVC Tubes - 1040392 Adapter Kit - 1" Copper Tubes Transformer Universal  230 Volt to 12 Volt AC - 1000814
By Pass 256 New Style For Autotrol 155 And 255 Adapter Kit - 3/4" Copper Tubes - 1040385 or 1001606
Your Price: $32.95

Add
Your Price: $24.00

Add
By Pass 256 New Style For Autotrol 155 And 255 Adapter Kit - 3/4" Copper Tubes - 1040385

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Parts and Valves > Autotrol / Osmonics > New Valves
DIY Repair Guides
Parts and Valves > Autotrol / Osmonics
Parts and Valves > Autotrol / Osmonics > 255
DIY Repair Guides > How to Replace Old Valve