Please place Orders Online

Email Questions
support@softenerparts.com

Technical Support 7 days a week.




Softenerparts.com is a BBB Accredited Water Conditioning Equipment Store in Venice, FL

  Home > Resin, Carbon,Tanks > Test Kits >

Hydrogen Sulfide levels 0.3 - 2.0 ppm pn 481197-20 Test Kit
Test Kit Hydrogen Sulfide levels up to 2 ppm pn 481197-20
 
Alternative Views:


Suggested Price: $29.95
Your Price: $19.95

Availability: Back Order
Product Code: TESTHYDROGENSULFIDE
Qty:

Description
 
This kit contains the necessary materials to conduct 30 tests of the Hydrogen Sulfide levels ( up to 2 ppm )in well water.

Test must be performed at source and immediately upon drawing sample of water to be accurate

** OUT OF STOCK -- try purchasing on Amazon,
https://www.amazon.com/gp/offer-listing/B00DIJ5WVC/

Hydrogen Sulfide: * Resulting from the anaerobic decomposition of organic matter, hydrogen sulfide is present in many water supplies. * Sewage and industrial wastes are other sources of sulfide pollution. Highly toxic, this compound has a characteristic rotten egg odor, which can be detected long before harmful concentrations are reached. * In the HS-C kit, sulfide discolors a detection paper. Results are obtained by comparison of the color to a printed chart.
Levels of 0.0, 0.3, 0.5,1.0, 2.0 mg/l ( ppm ).

Test Procedure ( directions come with product ).
1 ) Fill vial to the top line with water.
2 ) Dip one Low Range Hydrogen Sulfide Test Strip into the sample for 20 seconds with a gentle, steady up and down motion.
3 ) Remove and discard the strip.
4) With the color chart on a flat surface, place the sample vial on the white circles.
5 ) Viewing from the top, slide the vial from one white circle to the next until the best color match is found.
6 ) This product contains a very small amount of a lead acetate, please be sure to flush the waste water down a drain.

*** For higher levels of Hydrogen Sulfide ( above 2 ppm ), you'll need to use the 5 ppm test kit ( TESTHSC2537800 )

Related Products...

Hydrogen Sulfide levels up to 5 ppm pn 2537800 Test Kit
Your Price: $95.00

Add
Test Kit Hydrogen Sulfide  levels up to 5 ppm pn 2537800
Hydrogen Sulfide levels 0.3 - 2.0 ppm pn 481197-20 Test Kit
Your Price: $19.95

Add
Test Kit Hydrogen Sulfide levels up to 2 ppm pn 481197-20

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Resin, Carbon,Tanks > Test Kits
DIY Repairs > Common Water Problems
DIY Repairs
Resin, Carbon,Tanks
FAQ Knowledge Base