I am trying to locate a parts list & schematics for the Tectonic Water Softener Model #CB-32D.

I have called the following Tectonics and was referred to a company it had be sold to: CSI: Water Soft.
Water Soft in turn referred me to your company Softenerparts.com

*****

Tectonic was a proprietary Valve used on a line of cabinet model system. We do not have ( but are trying to get )
the parts diagram ( schematics ) for this unit. We do have several photos sent to use by owners of this system.
The Valve was made by Fleck ( now part of Pentair Water Treatment ), and the Valve Body is based on the
Fleck 5600, which we have all the parts and diagrams for.

So, if the problem is in the lower portion of the Valve, or with the By Pass,
SEE: FLECK 5600 PARTS

We no longer have the 2 rpm motor, nor any of the white gears.

* If the problem is with the Drive Assembly ( power head ), it would need to be replaced entirely with the
Fleck 5600 Econominder ( metered ) power head ( D = metered, or Demand ).
SEE: POWER HEAD 5600 METERED STANDARD

NOTE: The Tectonic Cover will NOT fit the Fleck 5600 power head, but the cover is really an option not
required for indoor installation. Covers are available for the Fleck 5600 Standard and "L" Designer power heads
we sell.

OR
another option is to replace the ENTIRE valve with a new COMPLETE Fleck 5600 Econominder Valve.
Retaining the use of the Tanks, Resin, and By Pass of the Tectonics.

SEE: VALVE FLECK 5600 METERED SOFTENER VALVE
*