|
|
|
|
|
|
|
|
|
|
|
|
|
A Pair of 1" I.D. Copper Tubes, Large nuts, and Gaskets ( part # 54F ).
Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass.
|
A Pair of 1" I.D. PVC Tubes, Large nuts, and Gaskets ( part # 54F ).
Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass.
Commonly used with Autotrol 155 and 255 By Pass valves.
Alternate part # 1001614 or AT10-PVC
|
Plastic Male Threaded 3/4" Adapter Kit 1000982 or 1001769
Includes A Pair of 3/4" male NPT Tubes, A Pair of large Black Nuts, and A Pair of Gaskets ( part # 54f ).
Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass.
Commonly used with Autotrol 155 and 255 By Pass valves.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3/4" I.D. Copper Adapter Kit Comes with 2 copper tubes, 2 large plastic nuts and 2 gaskets ( # 54F )
Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass.
Commonly used with Autotrol 155 and 255 By Pass valves.
Alternate part # 1001606
|
3/4" PVC Adapter Kit 1001613
Includes A Pair of 3/4" PVC Tubes, A Pair of large Black Nuts, and A Pair of Gaskets ( part # 54f ).
Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass.
Commonly used with Autotrol 155 and 255 By Pass valves.
Alternate part # 1001613
|
Air Check - New Style ( kit 1032417 ) used from about 1993 to present.
Can NOT be used in place of the old style ( see part # AP36F ).
Used only on late model Autotrol 155 and all 255 water softener valves.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gasket (old # 54F or newer # 1030541 ) used for all size Adapter Nuts on Autotrol Adapters used on all versions of the Autotrol By Pass Valves and for direct connects to older 168 Valves and newer 268 Performa Valves.
|
Kit, Service, 4 Oring Seals, Two Rubber Squares and Two Clips.
This Repair Kit is for the newer style By Pass used for Autotrol 255 valves ( called the 256 By Pass ) OR the Performa 1265 By Pass.
|
By Pass used on Autotrol ( 263, 268 ) Performa Series Valves.
By Pass is called the 1265 ( part # 1040930 ).
Includes 2 gaskets (old # 54F ) for the connection to the Valve side.
You may want to purchase 2 gaskets ( 1054F below ) for "house" side adapter nuts to insure a leak free seal.
*
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cam Gear ( main gear ) 1034362 used on the Technetic Plus Countercurrent 1100, and other models
# 4 on the diagram
No longer available from manufacturer.
This item is now obsolete.
****
Technetic 1000, Plus, 1100i replacement Valve Recommendation
|
Drive Gear for a Technetic 1000i 1100 PN 1032250
Obsolete part.
|
OBSOLETE - 1040717 Flapper Valve Disc Set for Technetics 1000 and 1100 series made by Autotrol, Osmonics old part # 1000N72G1.
This set is Obsolete ( as of January 2016 ).
As of April 4th, 2016 we have NONE left.
This item will not longer be available for purchase.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Injector 2 Bumps 150A150G2,1032984 Technetic 1000
Obsolete item, with limited quantities remaining in stock. Once gone, we will not be able to provide this item.
|
Injector 4 Bumps 150A150G13,1032977 Technetic 1000
Obsolete item - NONE In Stock
|
Injector - 6 bumps, with o-rings, old PN 150A150G19 and new PN 1032982
Used in Technetic 1000, 1000i Plus, 1100 softener valves ( recommended for 13 inch tank diameter systems ).
Obsolete item, with limited quantities remaining in stock. Once gone, we will not be able to provide this item.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8F-CC Injector Cap with oring ( old 6F ), new part number is 1032975.Was used in older Autotrol 155, 160, 163, 168, and Technetic 1000 Valves.
Very old versions were white and pointed. - Obsolete
|
Injector Screen and Cap with o-ring, old PN 155A200G1 and new PN 1032988
Used in Technetic 1000, 1000i Plus, 1100 softener valves.
Obsolete as of January 2016.
|
Manual for Autotrol Technetics 1000 Softener
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Autotrol Turbine used in Valves with Electronic Demand Regeneration Timers.
Used with 460 and 460i and 960 and Technetics 1000.
Newer PN 1033057.
|
Micro Switch used inside 3200 Timer Assembly
|
Micro Switch Technetics Plus series - AVP-1000906
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBSOLETE - NONE For Sale - Motor Drive Technetics Plus series - AVP-1034347
|
Large O-ring used on Backwash Plug,Brine Control Dial, and the larger Injector Cap and Injector screen cap ( models 255 and 268 ) on Autotrol Valves.
Part # 2F or 1010110
|
Large Top of Tank Oring.
Between Valve and Tank, old part # 43F.
Newer Autotrol part number is 1010429.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
O-ring 1-1/4" O.D. PN 1010140 used on the Technetic Plus Countercurrent 1100, and other models
# 26 on the diagram
|
O-ring 1-1/2" O.D. PN 40A125 used on the Technetic Plus Countercurrent 1100, and other models
# 27 on the diagram
|
Oring Autotrol By Pass Quantity ONE - 1034302-222
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oring used with Air Check - New Style used from about 1993 to present.
Used on late model Autotrol 155 and all 255 water softener valves.
|
O-ring old Autotrol for Caps PN 6F.
Was used on older Autotrol 155, 160, 163, 168, and Technetic 1000 Valves.
|
O-ring 1-5/16 x 1-1/2 x 3/32 inch 1010129 is OBSOLETE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One gram of food grade silicone for use with o-rings, gaskets and seals.
Enough to lubricate about a dozen or more o-rings and seals.
These tubes come from one of the leading valve manufacturers.
|
Spring used since mid 1980's on Autotrol 155, 255, 163, 168, and others.
PN 1001580
|
Transformer 120v/60hz to 12vac 60 hz used with many Autotrol valves in the U.S.A.
PN 1000811 and PN 3019151 and newest PN 44149
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transformer Outdoor120v/60hz to 12vac - 1235448
|
OBSOLETE Meter - Turbine Group used in Technetic 1000i 1100 - 1033670.
Included meter turbine wheel ( 460B32 - 1033057 ) in modular assembly that inserted into outlet side of valve.
OBSOLETE ITEM
|
Turbine assembly used in Autotrol 163, 168, 169, 268, 269, and Technetics 1000 ( but NOT the 1000i, or 1100 series, as thsoe require PN 1033670 ).
Includes meter turbine wheel included in modular assembly that inserts into outlet side of valve.
|
|
|
Fleck
155 / 1550-TC
