Please place Orders Online

Email Questions
support@softenerparts.com

Technical Support 7 days a week.




Softenerparts.com is a BBB Accredited Water Conditioning Equipment Store in Venice, FL

  Home > DIY Repairs > How to Replace Old Valve >

High Flow Bottom Distributor Basket (40922)
High Flow Bottom Distributor Basket (40922)
 
Your Price: $12.95

Availability: IN STOCK
Product Code: MD40922
Qty:

Description
 

High Flow Bottom Distributor Basket (40922)

Used to make Distributor Tube with a piece of 3/4" PVC Pipe ( gluing the distributor to the PVC pipe with PVC Cement ).
This 1.05" O.D. pipe size is used on all new residential valves.
Special Feature ( what makes is different than "standard" bottom distributors ) is,
It has 326 slots measuring 0.008 - 0.010 inches wide, so it can be use with Standard or Fine Mesh,
and still allow good flow rate ( minimal pressure drop ), because of it's extra surface area / slots.

NOTE:
Some older valves used the 13/16" O.D. tubes, but you can still use the larger 1.05" distributor and adapt to your old valve by gluing ( use PVC Cement ) a 6" section of your old 13/16" tube into the center of a piece of 3/4" PVC pipe that is Schedule 40.
You don't use a "coupler", but the actual pipe, 3/4" Schedule 40 PVC used with the MD40922 ( or MD1236 ), since the INNER diameter matches the OUTER diameter of the 13/16" pipe it will fit tightly inside the new 3/4" PVC ( must be Schedule 40 ). We also sell the 13/16" distributors and 13/16" pipe. .


Your old distributor pipe can usually be a guide to the length or height your new pipe will need to be ( And it must be Touching the Bottom of the Tank ).
If the Valve is a Fleck 5600, or an Autotrol Performa 263, or 268, then you will need the new tube to be equal to the top of the resin tank ( not more than 1/4" above ).
If you are using an Autotrol 155 or 255 valve, then the height should be 1/2 - 3/4" above the top of the tank.
It is helpful to "round" or "smooth" the top edges of the new PVC pipe with sand paper so that insertion into the valve does not damage the distributor o-ring in the valve body.

* How to "Cement" or "glue" to PVC

Related Products...

Distributor - Top 1.05 Twist On - MD1203
Your Price: $3.00

Add
Distributor - Top 1.05 Twist On - MD1203 or 18280
Distributor -Bottom 1.05 O.D. piping MD1236
Your Price: $10.00

Add
Distributor -Bottom 1.05 O.D. piping pn D1236

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

DIY Repairs > How to Replace Old Valve
Resin, Carbon,Tanks
DIY Repairs > Resin Replacement Guide
DIY Repairs
Resin, Carbon,Tanks > Media Tanks
Resin, Carbon,Tanks > Resin & Media
Resin, Carbon,Tanks > Tubing & Fittings