|
|
|
|
|
|
|
|
|
|
|
|
|
1" Copper Adapter Kit - used with Erie Valves 541, 542
PN 541-252-2 or new # 75037
|
3/4" Copper Adapter Kit for Erie 541, 542 Valves
75036, 541-252-1
|
Valve Body Repair Kit includes Plastic Valve Stem Assembly, Seat Insert with orings, Diaphragm with screw and washer, Diaphragm Spring, Check Disc, Check Disc Spring, Back Cap Seal.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Main Diaphragm for Erie 541 and 542 Valves, NO LONGER AVAILABLE Separately. MUST BE ordered with new style Valve Stem.
|
541-290-11 Egg Timer Assembly 72356 ( shipping 72357, as they don't make 72356 any longer ).
The 72357 has BSP ( British Pipe Threaded ) opening, and therefore now includes a barbed elbow fitting.
The fitting threads into the drain port, and allows the use of 1/2" I.D. ( 5/8" O.D. ) drain hose.
Also, we have been told you can use 1/2" NPT fitting if you use a lot of Teflon Tape.
This is a non-pressurized connection, so you can get it to "hold" with a lot of Teflon Tape ( when using 1/2" NPT male fitting ).
This is just the Timer Portion of the Valve ( as shown ).
Special Order item, 1 - 2 week Lead time
* However, we normally try to have ( 1 ) In Stock for immediate shipping ( if not, we will email to expect delay in shipping )
|
3/4" female NPT Brass w/ Plastic Nuts & Gaskets, sold as set of two each.
Old pn 541-282, and new pn 71962
Fits all Erie 541 and 542 models.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Backwash Subassembly ( flow adjuster with o-rings ) for variable flow control on Erie 541 and 542 Valves ( softener or filter valve application ).
|
Body Stem Assembly
Erie part # 541-244 is no longer available in metal.
Replacement is 72611 VALVE STEM & DIAPHRAGM REPAIR KIT
|
Brine Fitting ( 541-250-1 )with o-ring ( 186-111-N or 186-118 ))for Erie 541 Valves
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brine Fitting assembly 72348 Erie parts, 71124 ( elbow 568-336 ), 70797 ( Compression Nut for 3/8 tube, JACO PG-6, old PN 21-88 ), and 70667 ( o-ring , old PN 186-118 ) for Erie 541 Valves made after 3-01-2002
|
C -Clip for Erie Backwash Subassembly PN 19-19
|
Check Disc Return SPRING 541-239 New PN 71942
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Check Disc Assembly 541-246, new PN 75033
|
Clip for Brine Fitting Erie 541-254 ( 71947 )
|
Diaphragm repair kit with Valve Stem
Body Stem Assembly
Erie part # 541-244 is no longer available in metal.
Replacement is Kit 72611, VALVE STEM in plastic & matching DIAPHRAGM with screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Top Distributor for 1.05" distributor ( riser ) tubes.
pn 287-166 or 75014
Commonly used on Erie 568, 2000, 2001, 2400 and all newer Erie Valves.
Note many older Erie Valves could have either the 13/16" or an exact 1" distributor tube diameter, so please double check before ordering this part.
|
Gasket, Cross Over Port Oring - 529-244
Used in 541 and 542 type Erie Valve Body.
|
Gasket, rubber ( 541-213 new PN 71931 ) used for all Erie 541 and 542 Adapter Nuts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Injector Gasket 541-325
|
Owners Service and Operation Manual for the Erie 541-030 ( Egg Timer ) Softener Valve
|
185-028-12
Larger of the two orings found on the Seat Insert of the Erie 541 and 542 type valves.
185-024-1 is the small one also needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Smaller of the two orings from on the Seat Insert of the Erie 541 and 542 type valves.
185-028-12 is the large one also needed.
|
Plug, Brine Line, Erie, 541-273, 541-277,70553
|
Seal Oring used on Back Cap of 541 and 542 models.
541-206
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One gram of food grade silicone for use with o-rings, gaskets and seals.
Enough to lubricate about a dozen or more o-rings and seals.
These tubes come from one of the leading valve manufacturers.
|
541 Egg Timer Softener Valve.
Non-Electric Semi-Automatic.
541-030
|
|
|
