|
|
|
|
|
|
|
|
|
|
|
1" Copper Adapter Kit - used with Erie Valves 541, 542 PN 541-252-2 or new # 75037
|
1" Copper Adapter Kit for newer Erie 568, 2001, 2400 Valves
|
3/4" Copper Adapter Kit for Erie 541, 542 Valves 75036, 541-252-1
|
|
|
|
|
|
|
|
|
|
|
|
|
3/4" Copper Adapter Kit for newer Erie 568, 2001, 2400 Valves
|
Valve Body Repair Kit includes Plastic Valve Stem Assembly, Seat Insert with orings, Diaphragm with screw and washer, Diaphragm Spring, Check Disc, Check Disc Spring, Back Cap Seal.
|
Main Diaphragm for Erie 541 and 542 Valves, NO LONGER AVAILABLE Separately. MUST BE ordered with new style Valve Stem.
|
|
|
|
|
|
|
|
|
|
|
|
|
541-290-11 Egg Timer Assembly 72356 Just the Timer Portion of the Valve.
|
568-312-2 Worm Drive Shaft with Packing Gland Nut, Coarse Thread after Sept 1995
|
568-312-3 Worm Drive Shaft 75068
|
|
|
|
|
|
|
|
|
|
|
|
|
568-312-5 Worm Drive Shaft with Packing Gland Nut, Fine Thread pre Sept 1995 568-208-2 is now OBSOLETE - Only Coarse Thread avaiable.
|
Actuator ( 529-218 ) Erie 541 and 542 timers
|
3/4" female NPT Brass w/ Plastic Nuts & Gaskets, sold as set of two each. Old pn 541-282, and new pn 71962 Fits all Erie 541 and 542 models.
|
|
|
|
|
|
|
|
|
|
|
|
|
1" NPT Male Brass Adapter with Plastic nut and gasket. PN 71104 or 568-303-7 One Pair for the Erie 568, 2001, 2100, and 2400 valves or by pass
|
Adapter Subassembly ( UNION 71333 ) for Inline flow meter connection ( this part is double male threaded ) Old assembly PN 570-215, new PN 72051, and includes one Gasket ( 541-213 new PN 71931 ). SPECIAL ORDER - allow extra 2 weeks for delivery
|
Rotary Valve ( BWFC ) Backwash Flow Control 1.6 gpm Erie pn 568-271-1.6, 75050
|
|
|
|
|
|
|
|
|
|
|
|
|
Rotary Valve ( BWFC ) Backwash Flow Control 2.2 gpm Erie pn 568-271-2.2 , 75052
|
Rotary Valve ( BWFC ) Backwash Flow Control 2.6 gpm Erie pn 568-271-2.6 Used with 10 inch water softener resin tank applications.
|
Rotary Valve ( BWFC )Back Wash Flow Control 3.5 gpm "K", Erie 568, 2000, 2001, 2400. PN 72175, old 568-271-3.5
|
|
|
|
|
|
|
|
|
|
|
|
|
Backwash Subassembly ( flow adjuster with o-rings ) for variable flow control on Erie 541 and 542 Valves ( softener or filter valve application ).
|
* Special Order = Body Cover on top of valves, such as Erie 568, 2000, 2001, 2400 Part number 568-254-3
|
Body Stem Assembly Erie part # 541-244 is no longer available in metal. Replacement is 72611 VALVE STEM & DIAPHRAGM REPAIR KIT
|
|
|
|
|
|
|
|
|
|
|
|
|
Body Valve Rotary 2401 empty 568-400 71202. Rotary Valves models include Erie 568, 2000, 2001, 2400, 2401, 2401S, 2401F Part number 568-253 ( later 568-400 ) and labeled # 16 in our diagram ( Part number 71202 and label # 18 in newer service manuals ). As of August 2017 - Available as VALVE BODY SUBASSY W/PLASTIC PACKING NUT = PN 72804
|
Brine Fitting ( 541-250-1 )with o-ring ( 186-111-N or 186-118 ))for Erie 541 Valves
|
Brine Fitting assembly 72348 Erie parts, 71124 ( elbow 568-336 ), 70797 ( Compression Nut for 3/8 tube, JACO PG-6, old PN 21-88 ), and 70667 ( o-ring , old PN 186-118 ) for Erie 541 Valves made after 3-01-2002
|
|
|
|
|
|
|
|
|
|
|
|
|
Brine Line Elbow Fitting Kit with 0.5 gpm BLFC ( brine line flow control ) button, 568-355-0.5, new PN 71122
Special Order item = 7 - 10 days lead time before shipping
|
Brine Line Tee Fitting Kit 568-350, new PN 75073 Special Order item = 7 - 10 days lead time before shipping
|
By Pass used on Erie 568, 2001, and 2400 models. You need an adapter pair to use with the By Pass.
|
|
|
|
|
|
|
|
|
|
|
|
|
C -Clip for Erie Backwash Subassembly PN 19-19
|
Cable Sensor 2100-218, new part number 70735. For Erie 2100 valve, but also replaces 2001 part numbers 570-246-1, 72052 ( which is obsolete ). SPECIAL ORDER ( 1 - 2 week lead time ).
|
Cap for Drain Erie Valves - 529-286 new pn 71897
|
|
|
|
|
|
|
|
|
|
|
|
|
Clip for Brine Fitting Erie 541-254 ( 71947 )
|
Cover, Clear, Front Erie 541 and 542 529-234 new 71883 * Special Order - 2 week lead time *
|
Cycle Cam and Knob Assembly,529-239-1, 71884 Part # 15 in our diagram
|
|
|
|
|
|
|
|
|
|
|
|
|
Day Selector Wheel 12 Day 525-241-2 new 71818 used on Erie 541 and 542 timer controls. Part # 12A in diagram.
|
Deluxe Rotary Valve Body Repair Kit Erie 568, 2000, 2001, 2400 Includes parts labeled # 4 - 15 in our diagram. Oring body/valve cover,white teflon oring, worm gear, cam, oring cam/rotor, rotor plate, seal plate, insert plate, gasket, float spring, float valve with oring<
|
Diaphragm repair kit with Valve Stem
Body Stem Assembly Erie part # 541-244 is no longer available in metal. Replacement is Kit 72611, VALVE STEM in plastic & matching DIAPHRAGM with screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
Drain Paddle Stem Assembly used in electronic version of Erie 541-170 Series. Includes two orings on shaft. Drain Seat ( PE409-197 ) recommended to be replaced at the same time.
|
Drain Cartridge Repair Kit for Erie 541 and 542. If flow to drain will not stop, it is most likely this assembly that needs to be replaced.
|
Drain Seat ( 409-192 ) used in electronic version of Erie 541-170 Series. Includes two orings with threaded seat. Drain Paddle ( PE467-351 ) recommended to be replaced at the same time.
|
|
|
|
|
|
|
|
|
|
|
|
|
Top Distributor for 1.05" distributor ( riser ) tubes. pn 287-166 or 75014 Commonly used on Erie 568, 2000, 2001, 2400 and all newer Erie Valves. Note many older Erie Valves could have either the 13/16" or an exact 1" distributor tube diameter, so please double check before ordering this part.
|
Drain Fitting, 3/4" male thread x 1/2" Barbed, Elbow on top of valves, such as Erie 568, 2000, 2001, 2400 Part number 21-83 or 70793
|
Float Assembly Erie Rotary Valve 568, 2001 Includes Float, oring on float, and spring.
|
|
|
|
|
|
|
|
|
|
|
|
|
Gasket, Cross Over Port Oring - 529-244 Used in 541 and 542 type Erie Valve Body.
|
Gasket, rubber ( 541-213 new PN 71931 ) used for all Erie 541 and 542 Adapter Nuts.
|
Gasket, rubber ( 568-320 new PN 71110 ) used for all Erie Rotary ( 568, 2001, 2100, 2400 ) Adapter Nuts. Normally you should order Two. One for each Adapter Nut connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
GEAR, Time of Day ( 12 Day ) 529-232-1 new 71878 used on Erie 541 and 542 timer controls. Part # 5A in the diagram.
|
Injector Screen for Erie 541 Softener Valves. PN 413-13
|
Injector Cap ( metal plate ) for Erie Valves with valve body 541 or 542.
|
|
|
|
|
|
|
|
|
|
|
|
|
Injector Gasket 541-325
|
Insert Gasket Seal 568, 2000, 2001 PN 568-384 71183
|
Insert Plate 568, 2000, 2001 PN 568-383 71182
|
|
|
|
|
|
|
|
|
|
|
|
|
Knob Erie 568 Clock Drive 3003-205
|
Owners Service and Operation Manual for the Erie 2001 Electronic Softener Valve
|
Owners Service and Operation Manual for the Erie 2401 Electronic Softener Valve
|
|
|
|
|
|
|
|
|
|
|
|
|
Owners Service and Operation Manual for the Erie 541-030 ( Egg Timer ) Softener Valve
|
Owners Service and Operation Manual for the Erie 541-008 ( formerly 541D ) Softener Valve
|
Owners Service and Operation Manual for the Erie 542 Filter Valve
|
|
|
|
|
|
|
|
|
|
|
|
|
Owners Service and Operation Manual for the Erie 568 Valve
|
Microswitch kit ( 568 and 2001 DC motors ) 71186 ( 568-397 )
|
Microswitch kit ( 568 and 2001 DC motors ) 72453
|
|
|
|
|
|
|
|
|
|
|
|
|
24 volt / 50 Hz International version ( 30-77-J / 71663 ) is SPECIAL ORDER
|
Drive Motor 120 volt AC for older Erie Rotary Valves such as the 568, 2000, and 2001. List as part # 568-394 or 568-266-1F, includes worm drive shaft Newer part number 75043 ( motor ) or 71093 ( motor plus worm shaft ).
|
Drive Motor 24 volt DC for Erie Rotary Valves such as the 568 and 2001 series. List as part # 568-395 or 75081 or 71196 ( kit ). NOT for series 2100, 2200, or 2400.
|
|
|
|
|
|
|
|
|
|
|
|
|
24 Volt 60 Hz Erie 2100 Timer Motor, 30-129-E, new PN 70955
Special Order item = 7 - 10 days lead time before shipping
|
Timer Motor 120 Volt Erie 541 and 542 Valves. Old part number 529-A-241 or 30-77-F ( 71661 ) 120 volt / 60 Hz is always in stock, and ships immediately. Note: The drive gear has 9 teeth on it.
|
110 Volt Erie 568 Timer Motor
|
|
|
|
|
|
|
|
|
|
|
|
|
Oring used on Cam Rotor of Erie 568 and 2001 type valves. 185-041-1 and newer PN 70656 Included with ( installed on ) each new Rotor Cam, that comes in the Rotary Valve Repair Kit
|
O-ring 185-154-1 for Valve Cover
|
Oring for Cap ( 529-286 ) for Drain Erie Valves - 185-0221-1. New PN 71535 used on Erie 541 and 542 between the Drain Cap ( PE529286 ) and the Drain Plugger Kit ( PE529294 ).
|
|
|
|
|
|
|
|
|
|
|
|
|
185-028-12 Larger of the two orings found on the Seat Insert of the Erie 541 and 542 type valves. 185-024-1 is the small one also needed.
|
Smaller of the two orings from on the Seat Insert of the Erie 541 and 542 type valves. 185-028-12 is the large one also needed.
|
Valve Body to Tank O-ring used on the Rotary Valve, such as Erie 568, 2000, 2001, 2400 Part number 185-337-1 and Part number 70663 in newer manuals.
|
|
|
|
|
|
|
|
|
|
|
|
|
185-231-1 Used with the Erie 541 and 542 valve bodies and structural fiberglass tanks.
|
Thicker version used with older PARK tanks - O-ring between Valve and Tank, old PN PE186-136-N Used with the Erie 541 and 542 valve bodies and Park International fiberglass tanks.
|
Plug, Brine Line, Erie, 541-273, 541-277,70553
|
|
|
|
|
|
|
|
|
|
|
|
|
Ratchet Gear 525-254-2 w/ Ratchet (525260)
|
Retainer for Cap for Drain Erie Valves - 529-280 New PN 71894 used on Erie 541 and 542 under the Drain Cap ( PE529286 ).
|
Insert used with Erie 541 and 542 valves for use with larger 1.05" distributor tubes.
|
|
|
|
|
|
|
|
|
|
|
|
|
Rotary Valve Body Repair Kit Erie 568, 2000, 2001, 2400 Includes white teflon oring, worm gear, cam, oring cam/rotor, rotor plate, seal plate.
|
Screw ( one ) for Injector Cap for Erie 541, 542 - PN 15-89, New PN 71511
|
Screw for Solenoid Erie 541, 542 - PN 15-91, New PN 71513
|
|
|
|
|
|
|
|
|
|
|
|
|
Seal Oring used on Back Cap of 541 and 542 models. 541-206
|
Seal Plate Disc used in Erie 568 and 2001 type rotary valves. Complete Rotary repair kit recommended instead. Seal Plate Disc is included in repair kit.
|
Shaft 2100206 Drive Worm DC motor version 2100 2400 2401 Includes parts 70720 ( drive shaft ), 71075 ( worm ), and 70668 ( retaining ring ).
|
|
|
|
|
|
|
|
|
|
|
|
|
One gram of food grade silicone for use with o-rings, gaskets and seals. Enough to lubricate about a dozen or more o-rings and seals. These tubes come from one of the leading valve manufacturers.
|
Solenoid Coil - 120 Volt used with some Erie 541 or 542 Valves. Old 413-134-120 , New PN 71701
|
Solenoid Coil - 24 Volt 413-134-24 PN 71702
|
|
|
|
|
|
|
|
|
|
|
|
|
Solenoid Plunger Kit, # 5, Guide, 413-58 ( 71706 ), # 6 Spring, 413-62 ( 70984 ), # 7, Plunger, 413-61 ( 71709 ),# 8, Diaphragm, 413-59 ( 71707 )
|
Switch & Terminal Assembly PN 71850 old PN 525-729-4, Erie 541-008 Valve
|
OBSOLETE - Erie 541 Softener Valve ( 541-008 ) that was a replacement for older 541 softener valves. *** Note: As of March 30th, 2017, We NO LONGER have for sale or Stock this valve. Sorry.
|
|
|
|
|
|
|
|
|
|
|
|
|
542 backwash only filter valve. We have of NONE these valves remaining in stock. Erie has stopped making this model in the USA effective July 2016. We have several other Backwash Filter Valves that could be used as replacements ( Fleck 5600 and Hankscraft brands ). All would require some replumbing and additional By pass or Yoke for the plumbing connections, but would fit on same tanks used by Erie.
|
Model 2401F or Next Generation of Erie Rotary Valves. Filter Backwash Version. Electronic programmable timer.
Direct replacement for Erie 568, 2001, 2100 models Filter Backwash ( not water softener ). Optional 3/4" or 1" Copper Tail Adapter Kit ( our part numbers PE5683032 and PE5683033 ).
Also comes with 1.05 Upper and Bottom Distributor.
|
Next Generation of Erie Rotary Valves.
Electronic programmable timer.
Direct replacement for Erie 568, 2001, 2100 models.
Optional 3/4" or 1" Copper Tail Adapter Kit ( our part numbers PE5683032 and PE5683033 ).
Also comes with 1.05 Upper and Bottom Distributor.
|
|
|
|
|
|
|
|
|
|
|
|
|
541 Egg Timer Softener Valve. Non-Electric Semi-Automatic. 541-030
|
Complete 542 Egg Timer Back Wash Only Valve. Manual, 2-Hour Twist Timer, 542-030.
|
Worm Gear Erie 568, 2000, 2001, 2400 PN 568-260
|
|