|
|
|
|
|
|
|
|
|
|
|
|
|
Autotrol 255 Upper Valve Body Replacement without Timer Assembly.
Includes new style cover, which will require slight modification ( cut a little off ) when used with tank adapters that have the 36F Air Check ( pre-1994 models of 155 ).
|
Autotrol 255 Upper Valve Body Replacement without Timer Assembly ( Newer LOGIX 740, 742, 760, 762 ) .
It would be the PN 1244650 ( valve body ) and 1235340 ( top plate for Logix ) and it would include all Valve Body flow controls and Valve Disc installed / included. Just slide your old 700 series timer, motor,optical sensor and camshaft into place.
|
New LOGIX controlled 255 Valves ( not 440, 460i ) bodies can be rebuilt with these parts that go into the Autotrol 255 Valve, plus o-rings to tank adapter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All the parts that go into the Autotrol 255 Valve Body, plus orings to tank adapter.
|
Autotrol 255 Upper Valve Module with 740 LOGIX Timer Assembly,12 volt transformer, camshaft, cover and Oring kit.
Fits all Autotrol 255 and some late model 155 Series Tank Adapters ( old style 155 Air Check, 36F, will hit new top plate and therefore CAN NOT be installed on your tank adapter ).
|
Autotrol 255 Upper Valve Module with 460TC Timer Assembly, transformer, camshaft, cover and Oring kit.
Fits all Autotrol 155 and 255 Series Tank Adapters.
This is not the complete valve, just the upper valve body and timer assembly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Complete 440i for 120 volt 60 hz installations - Obsolete
No longer manufactured since Summer 2011
|
440i ( 1001690 ) and 440iHV ( 1001691 ) Back Plate
Bare Housing Back Plate Only.
Obsolete Item.
Timer Assembly can be replaced with the complete new 460TC we sell.
It will fit on all Autotrol 155, 163, 168, and most 255, 263, and 268 valves.
|
460i Metered Demand Timer ( 12 volt and 60 Hz ) will replace your defective electronic control ( NovRam, 460, 460i ).
Requires separate 12 volt transformer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Autotrol Electronic Metered Timer Assembly with Transformer for 12 Volt operation from your 120 Volt 60 Hz outlet.
Replacement for NovRam, 460, and 460i Timer Assemblies.
|
460TC 50 Hz International Timer Assembly 4001249 Replacement 7 DAY Timer Assembly for 440 series, with 12 volt 50 Hz AC Transformer
|
460TC Replacement 7 DAY Timer Assembly for 440 series, with 12 volt 60 Hz AC Transformer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Upgrade Kit 255/740 Logix Electronic replacing 440i and 440iHV series timer
|
Metered Control Upgrade for the Autotrol 255 / 460i is this 760 Logix Kit ( AP1255006 ) with Indoor ( open face ) Cover unless request Outdoor Cover.
Required you already have the Meter Turbine Assembly, our PN AP1032350, and the 12 volt Transformer ( our PN AP1000811 ), or you can purchase those separately.
|
1" Stainless Steel NPT Male Threaded Pipe Adapter Kit 3023828
** NON-STOCK Item - Special order 2 week lead time before we can ship to you.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A Pair of 1" I.D. Copper Tubes, Large nuts, and Gaskets ( part # 54F ).
Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass.
|
A Pair of 1" I.D. PVC Tubes, Large nuts, and Gaskets ( part # 54F ).
Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass.
Commonly used with Autotrol 155 and 255 By Pass valves.
Alternate part # 1001614 or AT10-PVC
|
Plastic Male Threaded 3/4" Adapter Kit 1000982 or 1001769
Includes A Pair of 3/4" male NPT Tubes, A Pair of large Black Nuts, and A Pair of Gaskets ( part # 54f ).
Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass.
Commonly used with Autotrol 155 and 255 By Pass valves.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3/4" I.D. Copper Adapter Kit Comes with 2 copper tubes, 2 large plastic nuts and 2 gaskets ( # 54F )
Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass.
Commonly used with Autotrol 155 and 255 By Pass valves.
Alternate part # 1001606
|
3/4" PVC Adapter Kit 1001613
Includes A Pair of 3/4" PVC Tubes, A Pair of large Black Nuts, and A Pair of Gaskets ( part # 54f ).
Used to connect to Autotrol Valves ( like 163, 168, 263, 268 )directly or to any Autotrol By Pass.
Commonly used with Autotrol 155 and 255 By Pass valves.
Alternate part # 1001613
|
Air Check - New Style ( kit 1032417 ) used from about 1993 to present.
Can NOT be used in place of the old style ( see part # AP36F ).
Used only on late model Autotrol 155 and all 255 water softener valves.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Backwash Control - Comes with Orings ( 2F and 3F ) installed.
Please select tank diameter.
Note: Your old Back Wash should have a small number on it that matches your resin tank diameter.
|
Rubber Ball - Used to regulate flow behind backwash plug and brine control dial.
Old part number 4F, and newer part number 1030502
|
Ball used in New Style ( since 1993 ) Aircheck of the Autotrol 155 and 255 Valves.
Not to be Confused with the small 4F flow control ball.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBSOLETE - Blending Valve Autotrol 255 PN 1041195
|
Logix Blending Valve Kit for Autotrol 255 and Performa ( 268 ) models that use new logix top plate ( will not work with older 440, 460 series ).
** Special order item = 2 to 3 weeks lead time before shipping **
|
Brine Control Assembly 1 lb. -10 lbs. range.
Old part # 1F-10.
Newer part # 1032994 or # 1034261.
Comes complete with the 2 orings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Brine Control Dial for Autotrol, 3 lbs. - 19 lbs. range.
This is the replacement for both old and new style Brine Controls.
Old part # 1F-19, New part # 1032996 or 1034263
Comes complete with the 2 orings.
|
Brine DI Plug - Check Valve for DI PN 1034110
|
PLUGGED - no refill Brine Refill Plug - Logix Backwash Valves PN 1030334
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Brine Refill Controller 0.33 gpm PN 1243510
|
By Pass for the Autotrol 255 valve
|
Gasket (old # 54F or newer # 1030541 ) used for all size Adapter Nuts on Autotrol Adapters used on all versions of the Autotrol By Pass Valves and for direct connects to older 168 Valves and newer 268 Performa Valves.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kit, Service, 4 Oring Seals, Two Rubber Squares and Two Clips.
This Repair Kit is for the newer style By Pass used for Autotrol 255 valves ( called the 256 By Pass ) OR the Performa 1265 By Pass.
|
Cable - Dry Contact Signal Input used with Logix Control - cable PN = 1239979
** SPECIAL ORDER ITEM - Lead time before shipping 2 to 3 weeks **
|
Cable - Turbine Sensor used with Logix Control 1235446
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camshaft 255 Logix 700 series pn 1235353 or 1236251
control valves.
This is the newer Logix version, and works with the 700 series of Autotrol 255 valve ( 268 performa uses a LONG version ).
|
Camshaft used for Autotrol 155 & 255 water softener control valves.
Newest part # 1031950, Standard One-Piece.
|
Extended Long Rinse Camshaft 255 400 series - 255 PN = 1033026, 155 PN = old 21F-2 and old 155A153
Works with Autotrol 155 & 255 control valves.
Iron filter and Backwash only Camshafts are modified versions and they have this special "gray" segment on the shaft.
We do NOT have the segments ( cams ) separately, and we do NOT have this available for any other model besides 155 and 255.
It will NOT work the longer 163, 168 valve bodies ( nor 263, 268 ).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camshaft 155 & 255 shaft white segments softener 1033024
|
Extended Camshaft Bearing ( 1000297 ) used to hold back end of Camshaft and longer "I" Lid Covers.
|
Cover Model 255 Series 400 timers 3019870
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camshaft Bearing used to hold back end of Camshaft on most Autotrol Valves.
|
New Style Output Connector used to connect to CamShaft on the 440i & 460i & 460TC Timer Assembly.
Used on all 255, 263, 268 timer assemblies.
Part Number 1001833.
Does not use C - Clip, but can only be used on 440i or 460i or 460TC Back Plates that have a slot for the "arrow" to slide through from front of timer to back of timer housing.
|
Now Obsolete Part, NONE IN STOCK
21E Output Connector used to connect to CamShaft on the 440 & 460 Timer Assembly.
Used on all 155, 163, 168, 255 timer assemblies. Part Number 21E or 1031496.
OPTION:
Newer Version used in the 440i, 460TC and 460i is slightly different one, AP1001833,
and can be used as a replacement ( shave off "arrow" on the AP1001833, and no C-clip used, but it will still "stay" in place when 440 is re-assembled to provide turning of the Camshaft ).
Recommendation = Complete timer replacement option is the AP460TC.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Camshaft XS 155 & 255 part 1033025
|
Cover - Logix Control Indoor 255 268 1236246
|
Cover - Logix Control Outdoor 255 268 1267811
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Standard Cover used for Autotrol 155 and 255 Valves.
Old PN 20F, New PN 1032565
|
Cover Model 255 Series 400 timers 3019870
|
1.05 Top Distributor Twist On Style used on Newer Fleck and Autotrol Control Valves.
Old part number 23D1203, new part numbe MD1203.
Replaces Fleck p.n. 18280 collector, top, 1" x .011, gray
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4" female thread x 3/8" compression elbow.
Most commonly used on New Autotrol Air Check for some late model 155 and all 255 Valves.
|
Valve Disc Set for the Autotrol 255, PN 1000250.
Autotrol ( GE Osmonics ) 255 Valves have been in use since late 1995.
It replaced the Autotrol 155, which was made from 1970 until late 1995.
|
99F Tripper Arm and Gear for Autotrol 440 and 440i Timer Assemblies.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Black Drive Gear # 7, 420A43.
This gear drives the Tripper Arm Gear ( 99F ).
|
Black Drive Gear # 8 .
This Gear Drives the large Red or Black Output Knob Gear.
|
Red Output Gear for 440 and 440i Timer assembly used on some Autotrol 155, 1550-TC, 163, 168, 255, 263, 268.
Very old PN was 420B52.
NEW COLOR IS BLACK for this Gear ( newer PN in some manuals 1001583 ).
Identical to older Red version.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gear Tripper Arm 6 Day REVISED PN 3007499
OBSOLETE
|
Large Black Output Gear ( 1000095 ) used in 460i and 460TC Only.
Does Not work in older 460 NovRam, nor any 440 series timers.
|
INJECTOR ASSEMBLY NC for DI PN 1034119
SPECIAL ORDER - Limited Quantity
2 - 3 Weeks Lead Time before Shipping
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Injector Cap ( 1000218 or 1000269 ), Newer 255, and 268 Valves.
Also, part 25D for old 168FA Valve.
|
Injector Screen & Cap 255, and 268 Autotrol Valves, and Magnum Valves ( Pilot Filter Screen ).
Includes Cap, Screen and o-ring PN 2F or new PN 1010110
|
Injectors For Autotrol LOGIX Valves
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Injectors For Autotrol Valves w/Orings ( 26F & 27F ) included.
White AA = 1032970
Blue BB = 1032971
Red CC = 1032972
Green DD = 1030272
|
Timer motor used in 440i 12 volt 50 Hz AC CW 3W 1 RPM G. E. Osmonics - Autotrol Part Number 1001568
50 Hertz motor used in many countries outside the U.S.A.( where 60 Hertz is standard - not this 50 Hertz version ).
|
Jumper Pin, 460i or 460TC 1007776
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Locking Bar For Autotrol 155 & 255
|
Manual for Autotrol 255 Softener with 440i Timer
|
Autotrol Turbine used in Valves with Electronic Demand Regeneration Timers.
Used with 460 and 460i and 960 and Technetics 1000.
Newer PN 1033057.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBSOLETE - No longer available - Drive Motor used in 940, 960, 963 timer assemblies
Voltage rating 8.5 to 13 VAC, 60 Hz, 2/3 rpm ( Sometimes labelled .66 rpm ).
12VAC,60Hz 2/3RPM CCW 3W Timer Motor. Part No. 1000891
|
Drive Motor used with GE Osmonics Logix Electronic Controls ( 740, 742, 760, 762 ).
PN 1235361, 1238861, or newest 3019221
Now includes Cable ( attached as one piece ) with this item.
Newest part number = 3019221
The Motors are now shipping from manufacturer with the Wires attached internally.
|
98F-1, 1030846, 1000376, and 420A56, are all part numbers for this 115 V, 60 Hz, 1 RPM Timer motor used in 440 Timer assemblies.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12 volt 60 Hz AC CW 3W 1 RPM osmonics-autotrol PN 1001569 - Obsolete item
|
1034479, Motor used in some 440i timer assemblies. is now OBSOLETE
Connected to 120 Volt Two Wire Power Cord by a special plug in on motor, unique to this motor.
You will now need to use the standard timer motor used for decades in the 440 timer, part 98F-1.
|
Smaller Oring used on Backwash Plug and Brine Control Dial on Autotrol Valves.
Part # 3F or 1010108
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Large O-ring used on Backwash Plug,Brine Control Dial, and the larger Injector Cap and Injector screen cap ( models 255 and 268 ) on Autotrol Valves.
Part # 2F or 1010110
|
Large Top of Tank Oring.
Between Valve and Tank, old part # 43F.
Newer Autotrol part number is 1010429.
|
Oring for 1.05" distributor used in most newer Autotrol 163,168,255,263,268 valves.
Part Number 1010428 also pn 1232370
O-ring 3/16in. x 3/4in.x 1 in. EP
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oring Autotrol By Pass Quantity ONE - 1034302-222
|
Oring used with Air Check - New Style used from about 1993 to present.
Used on late model Autotrol 155 and all 255 water softener valves.
|
26F small oring used on Autotrol Injector.
You will also want to order 27F to go with it.
OR just order a new injector as the orings are included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
27F small oring used on Autotrol Injector.
You will also want to order 26F to go with it.
OR just order a new injector as the orings are included.
|
The O-RING used on the "Gland" of the Meter Adapter used on Autotrol 155 and 255 Valves.
This items does not appear in any Manual and not sold by Autotrol.
|
(2)38F & 39F
( valve body to by pass or piping boss )
Old part number 150A144.
New part number 1040459.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Valve Body to Tank Adapter O-rings
32F,(4)35F,& 37F
Includes small tube of silicone lubricant
|
Regenerant Refill Controller, No Ball, 0.33 gpm.
Comes complete with the 2 orings.
|
Optical Sensor, PN 1235373, used with Logix Electronic Metered Control.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3/4" Noryl Piping Yoke with Orings and Bolts included
Old PN 157A140, New PN 1040279
|
3/4" NPT Stainless Steel ( use to be Brass ) Piping Yoke with Orings and Bolts included
Old PN 150A140, Newer PN 1040277 or 3023763
NOTE: Drain opening is 3/8" NPT.
|
Power Cord 110V 440i Two Wire Ungrounded
OBSOLETE - ONLY ONE LEFT in Stock
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Screw Autotrol Valve 33F - 1006093 - 1234170 used Autotrol 155, 255, 163, 168, and others.
One used to hold Locking Bar on Models 155 and 255.
Same stainless steel self tapping screw used to hold Top Plate to upper valve body ( 11 or 12 depending on model ).
|
Screw Autotrol Valve 85F - 1006091 used with older 440 Timer to hold Face Plate to time housing - Not Valve Top Plate.
No. 6 x 1/2 inch self tapping.
OBSOLETE.
We have NONE of these left, as the 440 timers have not been produced since around 2002 ( switched to 440i Case after that ).
|
Kit for mounting the Autotrol 155 or 255 By Pass, or Piping Boss ( yoke ), or meter Turbine Assembly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One gram of food grade silicone for use with o-rings, gaskets and seals.
Enough to lubricate about a dozen or more o-rings and seals.
These tubes come from one of the leading valve manufacturers.
|
Six Day Skipper Wheel
|
Skipper Wheel 6 Day REVISED PN 3007523
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Seven Day Skipper Wheel ( 14F-7 or 1031742 ) used on Autotrol 440 and 440i Timers
OBSOLETE part - None as of May 2019.
|
Skipper Wheel 7 Day REVISED PN 3007524
|
Spring used since mid 1980's on Autotrol 155, 255, 163, 168, and others.
PN 1001580
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Spring used with Output Gear on 440 and 440i Timers.
Commonly called part # 22E in diagrams.
|
Spring, One Piece used on 255 Logix 700 series Valves
This is the newer Logix version, and works with the 700 series of Autotrol 255 valve ( 268 performa uses a LONGER version, pn 1235339 ).
|
Autotrol Tank Adapter 1033064 ( new 255 series 1033784 ) replaces 31N used on Series 155 models.
Comes with new style air check assembly, top of tank oring and 1.05" distributor oring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Air Check Adapter to allow use of older style Air Check ( 36F )on newer Tank Adapter ( after 1993 ).
Or used to allow a direct elbow connection to tank adapter.
Please do not order this part unless you are positive you need one.
|
OBSOLETE - Timer Assembly 440i 12 volt 50 Hz AC CW 3W 1 RPM G. E. Osmonics - Autotrol
50 Hertz motor used in many countries outside the U.S.A.( where 60 Hertz is standard - not this 50 Hertz version ).
Transformer sold SEPARATELY.
|
Timer Assembly 440i 12 Volt 60 Hz - Requires 12 volt transformer AC CW 3W 1 RPM G. E. Osmonics - Autotrol
Transformer sold separately.
60 Hertz motor used in the U.S.A.( where 60 Hertz is standard - not 50 Hertz version used in other countries ).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Timer - 740 Logix World Electronic Control made to operate on 12 volts and 50 Hz or 60 Hz.
This is Just the Controller.
NOTE: This is a special version and we order them special for applications where the voltage source is 50 Hz.
|
760 Logix Electronic Meter Control Timer Assembly made to operate on 12 volts and 60 Hz.
This is Just the Controller.
Note: This control is sold as a replacement for your old 760. and can not be used on a valve using the 400 or 900 series timers, as the controller would not fit, and special camshaft and rear driver motor is used with the Logix Timers.
|
762 Logix Electronic Meter Control Timer Assembly made to operate on 12 volts and 60 Hz.
This is Just the Controller
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Timer 740 Logix Electronic Board Only 1269121, 1242146
|
Timer 742 Logix Electronic Board Only 1242150
|
The plastic "door" is called the Access Window ( 1000094 ) used in 460i and 460TC Only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Timer Locking Flag Pin used to hold timer assembly in place.
Old PN # 5F and Newer PN # 1031391.
Older versions were white, and the new version is black.
|
Top Plate Autotrol 255 and 440 or 460 series 1033067, includes springs.
|
Top Plate Model 255 Series 400 timers 3019871
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Top Plate Model 255 Series Logix timers 1235340
|
Transformer 120v/60hz to 12vac 60 hz used with many Autotrol valves in the U.S.A.
PN 1000811 and PN 3019151 and newest PN 44149
|
Transformer 220v/50hz to 12vac used with many Autotrol valves in Britain or using the British outlet and voltage.
Required for 440i low voltage and 460i electronic timers ( and new Autotrol electronic timers ).
Plugs into a small jack located on the Timer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transformer Outdoor120v/60hz to 12vac - 1235448
|
Transformer 230v and 50 Hz or 60 Hz to 12v AC used with many Autotrol ( GE Osmonics ) valves. This is the "C" outlet and voltage.
Required for 440i low voltage and 460i, 740, 760 electronic timers ( and a few other timers ).
Plugs into a small jack located on the Timer
|
13/16" Tube Insert ( 1041010 ) used to allow newer Valves with 1.05" distributor openings to use the older style 13/16" O.D. distributor tubes found in all older Autotrol 155 and some other older Valves.
Insert is placed into the bottom of the Valve opening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3/8" OD Black Tubing sold by Foot
|
Meter Adapter used on Autotrol 155 and 255 Valves.
Common Timers used with this assembly are 460NovRam, 460i, and 760,or 762 Logix.
|
Valve - 255 Autotrol 740 Logix Day Timer Softener Control
Logix 740 programable timer is used to control the Day(s) of Regeneration, and allows control the Time of Regeneration.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
760 Logix Electronic Meter Control Timer Assembly on the Autotrol 255 Softener Valve.
|
Common repair and maintenance for Autotrol 155 ( 1550-TC ) AND 255 Valve with 440 and 460 Controls is shown on this Video.
Now together on ONE DVD.
|
|
|
Fleck
155 / 1550-TC
