Please place Orders Online

Email Questions
support@softenerparts.com

Technical Support 7 days a week.




Softenerparts.com is a BBB Accredited Water Conditioning Equipment Store in Venice, FL

  Home > Fleck > 9000 9100 Parts >

9000 or 9100 Rebuild Kit Pistons and Seals

9000 or 9100 Rebuild Kit Pistons and Seals
 
Your Price: $193.95

Availability: IN STOCK
Product Code: 349091PSKIT


The following items are included FREE with this product:



Silicone Option:
Silicone 1 Gram Tube Lubricant for Orings [Add $1.49]

Qty:  
Description
 
Rebuild Kit Fleck 9000 or 9100 Valve,
Our 9091PSKIT includes
Top Piston Assembly 60400
Bottom Piston Assembly 60401
Top Seals and Spacers 60125
Bottom Seals and Spacers 60421


No special tools required.

When the Valve gets stuck or starts leaking,
it is time to replace these moving parts.
Normally the brine valve piston is fine, and has NOT been made part of this kit.

NOTE: Spacer # 26 is special and it has 2 seals stacked in front of it.
reference, http://www.softenerparts.com/v/vspfiles/assets/images/9000cv.jpg

That is all there is to go by.. except for paying attention and laying them out as you remove the lower section.


Helpful Hints:
The valve has 12 "normal" spacers.
4 used in the top and the other 8 in the bottom.

The valve has 16 seals.
5 used in the top and the other 11 used in the bottom.
Lower Seal Kit, 60421, includes ( 2 ) packets that contain 5 seals and 4 spacers ( 10 and 8 total ),
And the # 26, black, solid spacer, and the 11th Seal separately
Kit does not include the "white" end stub plug, just before the metal end plate.. that is to be "re-used".

The # 26, black, solid spacer is to be installed with a Seal on either side of it.
and actually ( 2 ) Seals installed towards the front of the valve.

The seal between the # 26, black, solid spacer, is not clearly shown "behind" it ( or between it and the next require Spacer ) in the manual diagram, but it's where a Seal is required.
Again, the lower piston area will use:
11 Seals
8 spacers
1 solid black ( # 26 ) spacer
1 solid white ( # 43 ) end plug PN 14928 ( re-use your original )

*** Sorry that only Video currently available to "show" any of this was made by Pentair with model 9100.
It may provide some assistance in understanding about rebuilding the valve ( replacing Pistons & Seals Kit ).
here:
https://youtu.be/risXNCtzouM?t=594

NOTE: You do not need the special "tools" shown in the Video.
A piece of hard wire can be used to "hook" spacers, and your fingers can be used to remove them.
Also, the replacement can be done without the "stuffer" tool by hand ( we have NEVER used or even sold the Stuffer for 9000 ).
And you do NOT need Pentair Silicone compound. Never heard of it, until I view this "Pentair" video.

Related Products...

Seal and Spacer Kit Lower Fleck 9000 and 9100 - 60421
Your Price: $37.95

Add
Seal and Spacer Kit Lower Fleck 9000 and 9100 - 60421
Piston Assembly 9000 Top - 60400
Your Price: $52.95

Add
Piston Assembly 9000 Top - 60400
9000 or 9100 Rebuild Kit Pistons and Seals
Your Price: $193.95

Add
9000 or 9100 Rebuild Kit Pistons and Seals
Manual for Fleck 9000/9100/9500 Softeners
Your Price: $10.00

Add
Manual for Fleck 9000/9100/9500 Softeners
Piston Assembly Fleck 9000 Lower - 60401
Your Price: $92.95

Add
Piston Assembly Fleck 9000 Lower - 60401
Brine Valve Assembly for 9000 /9400/8500/TwinFlo100 - 60350
Your Price: $13.95

Add
Brine Valve Assembly for 9000 /9400/8500/TwinFlo100 - 60350
Video 9000 Valve Servicing DVD
Your Price: $35.00

Add
Video 9000 Valve
Seals and Spacers Kit Fleck 5600 and 9000 60125
Your Price: $15.95

Add
Seals and Spacers Kit Fleck 5600 and 9000 – 60125

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Fleck > 9000 9100 Parts
Fleck > Alphabetical
Fleck