Motor Black DC PN 7286039, was modified ( had plastic drive gear ) , but is now back to
all metal gearing.Available with matching
metal Cam Gear for 1" High Flow valve, operates on DC voltage with plug to matching circuit boards ( PWA - Timers ).
New ( since May 2019 ) - Kit Part Number = 7373828,
Changing again after April 2020 = Kit Part Number 7384691 ( metal drive gear ).Cross reference old PN 7234731 or 7228900 or 7228544 or 7223015 or 7252381 or
7281291, now 7384691and manufacturer authorized substitution for 7250622
GE part number = WS26X10021 or WS26X21821 ( was the plastic version kit listed in some service manuals )
Includes ( 2 ) Screw, #8-32 x 1. If you have a newer model, since 2015,
you might need to use your original screws as they are slightly longer, Screw, #6-19 x 1-3/8 (
PN 7338111 ).
Rebuilding Valve:A scratched, worn, or warped Rotor Disc must be replaced.
Seal Kit ( 7185487 ) should always be replaced at the same time. And may be needed more often than any other part.
If motor has been clicking, or getting stuck, it too should be replaced at the same time to restore valve to proper operation.