Rotor & Disc Sears, GE, North Star 7199232 Replaces Part # 7103964 and # 7088504 G.E. part # WS26X10002
Rotor & Disc Sears, GE, North Star 7199232 Replaces Part # 7103964 and # 7088504 G.E. part # WS26X10002This standard version Rotor Disc ( 7199232 ) is most commonly used and the smaller of two sizes made ( only 3 3/8" in diameter ). Larger version used with 1" valve is Rotor Disc ( 7185500, WS26X10010 ) and it has a larger 4 3/8" diameter. If your Valve is not drawing brine, and you have replaced the Nozzle Venturi Gasket ( PN 7204362 ) or it looks good,THEN the next most likely cause of the problem is worn out Seal Orings. Replacing the Seal Kit is very easy. Each oring only fits where it belongs. It is recommended to check the surface of the Rotor Disc also, and replace if scratched, or if your valve has been getting STUCK ( and causing your Motor to slip or strip internal gears in the motor ). IN STOCK ** SHIPS IN 24 HOURS ** ARRIVES IN 2 - 5 Days Standard Shipping or 2 - 3 days Priority Mail.Rebuilding Valve:A scratched, worn, or warped Rotor Disc must be replaced. Seal Kit ( 7129716 ) should always be replaced at the same time. And may be needed more often than any other part. If motor ( 7133008, 7285944 ) has been clicking, or getting stuck, it too should be replaced at the same time to restore valve to proper operation. Check Gasket ( 7204362 ) under Venturi Disc when ever you have a problem with brine suction, as this Gasket can get brittle with age.Video on Seal Kit and Rotor Disc Replacement:
