Distributor -Bottom 1.05 O.D. size MD1236 NOT 7105047 WS14X10001

NOT PN 7105047 or GE # WS14X10001 ( no pipe included ), but can used as a lower cost substitute.
1.05 inch O.D. Bottom Distributor .010" - .013" slots

Used to make Distributor Tube with a piece of 3/4" PVC Pipe you supply
( gluing the distributor to the PVC pipe with PVC Cement ).

This 1.05" O.D. pipe size is used on all new residential valves.
All 7105047 and WS14X10001 use 1.05" O.D. pipe.

** This FAQ Article might help with the connection of a new pipe for your unit,
see: Distributor O-ring problem and solution
And anytime you remove the Valve Head and Distributor Pipe from the TANK,
you should Replace the O-rings in that area,
see: Oring_Kit_Valve_to_Tank_7112963