Hankscraft Metered Power Head ( Control Valve Drive )with 120 volt 60 Hertz 1/30 rpm Timer Motor installed.
Includes all internal gears, meter cable, back cover ( but no Front Cover - 16DCVR-H sold separately) and power cord.
This is only the "top" ( drive assembly ) and not a complete Valve.
For complete Valve, see Valve - Metered Softener HS-SMM
This is a compatible replacement for Fleck 5600 metered power heads, with only functional difference being the METER CABLE is shorter,
so you will need to re-use your old meter cable( PN 14043 ) or order cable separately to use with this replacement power head.
Clip For Meter Cable Assembly inside control valve.
Holds spring ( 14276 ) and ratchet gears ( clutch, 13831, and pinion, 13830 ) in place.
Cable connects through this Clip.
Then to the "Clutch" ( with a spring on the shaft and clip to apply pressure ).
Then the "clutch" drives the "Pinion" gear, that in turn moves the Program Wheel ( on the front of the control ).
To Remove Cable from the meter cover, just pull up.
To Remove Cable from the Control Valve,
Use your thumb nail on your right hand to hold the "
meter cable clip" down ( secure to control ), and then pull the cable with your left hand. It will come right out.
