Complete Water Softeners For Sale

Basic system includes softener control valve, 26,000 grain ( .75 cu. ft. of resins ) mineral tank ( 8" d x 44" h ), round poly brine tank ( 18" d x 33" h), owners installation/service manual, and technical support phone number. You will need to connect inlet, outlet, and drain line. Plug into electric and add salt to operate. Plumbing connections are 3/4" unless you ask for 1" ( no extra charge ). Five years parts warranty.

Well Water System includes softener control valve, 32,000 grain ( 1 cu. ft. of resins ) mineral tank ( 9" d x 48" h ), round poly brine tank ( 18" d x 33" h), owners installation/service manual, and technical support phone number. You will need to connect inlet, outlet, and drain line. Plug into electric and add salt to operate. Plumbing connections are 3/4" unless you ask for 1" ( no extra charge ). Five years parts warranty.

Larger sizes available. Please ask for a quote.

Note: The Fleck 9000 valve uses twin resin tanks.
Thus providing continuous 24 hours of softened water as it alternates between tanks.

New 9100 Version of the Fleck 9000

We offer customized water softeners for residential
and light commercial applications.
Please e-mail us for more information.

Please include the following information to help us
make sure you get the proper size system.

We don't just sell equipment, we sell solutions.
Customer satisfaction is our top priority.

NOTE: A water softener does not remove hydrogen sulfide ( rotten egg ) or chlorine odors. We have other systems to take care of these problems. < See Carbon Filters >
We assume that your water is bacteriologically safe. Please have it check by your local health department if you are concerned about the safety of your water.

Who Manufactures Your Water Softeners?

Our water softeners are assembled at a wholesale O.E.M. using either Fleck or Autotrol valves according to our specifications. We use Kavey Water Equipment, a Crane Co., located in Venice, FL. They use all new NSF approved materials. You will find this to be the case for most equipment manufacturers in the water treatment industry. The best part is, the
components used are standardized and not proprietary ( like Culligan, Rainsoft, Kinetico, and Ecowater ). You will have easy access to parts when you need them ( many years from now ). All dealers have access to Fleck and Autotrol parts ( the control valves we use ).The tanks are standard in sizing and threading. The resin is made in the U.S.A. to the highest industry standards.

There are perhaps a thousand different companies manufacturing water softeners. Most use Fleck and Autotrol valves. A few use proprietary valves and sell only through franchised dealers ( Culligan, Ecowater, Kinetico, and Rainsoft ). Their systems are not necessarily any better than a comparable model using a Fleck or an Autotrol valve, they just usually cost more and require that you return to them for service ( since they are the only source for parts for their unique valves ).

Free Water Test for Hardness, Iron, ph, and TDS.
( Just mail us a few ounces of your water ).