|
|
|
|
|
1/4" Tubing
Your Price: $0.25
|
Tubing 3/8" OD Black Tubing sold by Foot
Price per Foot: $0.33
ENTER # of Feet You Need
|
5/8" OD x 1/2" ID Black Tubing sold by Foot
Your Price: $0.50
|
|
|
|
|
|
1/4" Tubing - Sold by the foot
|
3/8" OD Black Tubing sold by Foot
|
5/8" OD x 1/2" ID Black Tubing sold by Foot.
|
|
|
|
|
|
|
|
1/2" OD Black Tubing sold by Foot
Your Price: $0.90
|
Fitting, Drain 1/2 m x 1/2 Barbed
Your Price: $1.00
|
Oring 1/4" Tubing Retainer Quick Connect
Your Price: $1.00
|
|
|
|
|
1/2" OD Black Tubing sold by Foot
NOTE: Does not fit 1/2" barbed fittings, as the ID is too small.
|
1/2" male thread x 1/2" Barbed slip on fitting
|
Oring for 1/4" Tubing Retainer John Guest and Parker Quick Connect.
|
|
|
|
|
|
|
|
Teflon Tape Roll 1/2 inch x 520 inches
Your Price: $1.49
|
Drain Fitting, 1/2 m x 1/2 Barb, Elbow
Your Price: $1.50
|
1/2"M X 5/8" Barb Elbow
Your Price: $1.50
|
|
|
|
|
Teflon Tape Roll 1/2 inch x 520 inches
Perfect to use on drain fitting and any threaded connection 3/4" or less.
|
Drain Fitting, 1/2" male thread x 1/2" Barbed, Elbow.
|
1/2"male threaded X 5/8" Barb Elbow.
|
|
|
|
|
|
|
|
1/2"F X 1/2" Barb Elbow
Your Price: $1.50
|
3/4"F X 1/2" Barb Elbow
Your Price: $1.99
|
Fitting 1/4 m x 1/4 c Straight 1044NO
Your Price: $2.00
|
|
|
|
|
1/2"female threaded X 1/2" Barbed Elbow.
Commonly used on Autotrol 1/2" male by pass drain connection.
Use with 5/8" O.D. tubing.
|
3/4"female threaded X 1/2" Barbed Elbow.
Use on Performa 263, 268 GE Osmonic Autotrol valves male drain connection.
Use with 5/8" O.D. tubing.
|
1/4" male thread x 1/4" compression nut, Straight.
|
|
|
|
|
|
|
|
Fitting 1/4 m x 3/8 c Straight 1064NO
Your Price: $2.00
|
Fitting - Elbow 1/8 m x 1/4 c
Your Price: $2.00
|
1/4m x 1/4c Elbow
Your Price: $2.00
|
|
|
|
|
|
1/4" male thread x 3/8" compression nut, Straight.
|
1/8 male thread x 1/4 compression nut Elbow used commonly in connections to RO membrane housings.
|
1/4" male thread x 1/4" compression nut Elbow
Commonly used on older RO Systems
|
|
|
|
|
|
|
|
1/4" Tube X 1/4" m Thread Male Connector
Your Price: $2.00
|
1/4 m x 3/8 c Nylon Elbow
Your Price: $2.50
|
Elbow, 1/4 f x 1/4 c Fitting Plastic Jaco
Your Price: $2.50
|
|
|
|
|
|
1/4" Tube X 1/4" m Thread Male Connector
|
1/4" male thread x 3/8" compression nut, Nylon Elbow used primarily in the old style ( 36F ) Autotrol Air Check connection.
|
1/4" female thread x 1/4" compression elbow.
Can be used on New Autotrol Air Check for some 155 and all 255.
|
|
|
|
|
|
|
|
3/8c x 3/8c Elbow
Your Price: $2.50
|
3/8" Tube x 1/4" m Threaded Male Connector
Your Price: $2.75
|
Elbow, 1/4 f x 3/8 c Fitting Plastic Jaco
Your Price: $2.95
|
|
|
|
|
3/8" compression x 3/8" compression elbow.
Commonly used to connect brine tubing and brine pickup tube together.
|
3/8" Tube x 1/4" m Threaded Male Connector
|
1/4" female thread x 3/8" compression elbow.
Most commonly used on New Autotrol Air Check for some late model 155 and all 255 Valves.
|
|
|
|
|
|
|
|
Elbow, 3/8 f x 3/8 c Fitting Plastic Jaco AT1002735
Your Price: $2.95
|
Fitting 1/4" x 1/4" Union Elbow JG-PI0308S S1406
Your Price: $2.95
|
Fitting 3/8" x 3/8" Union JG-PI0412S
Your Price: $2.95
|
|
|
|
|
3/8" female thread x 3/8" compression elbow.
Used on some threaded "pick up" assemblies.
And used for the Autotrol Performa brine connection.
|
Fitting 1/4" x 1/4" Union Elbow JG-PI0308S S1406
|
Fitting 3/8" x 3/8" Union JG-PI0412S
|
|
|
|
|
|
|
|
Overflow Fitting With Nut for Brine Tanks
Your Price: $3.00
|
1/2 x 1/2 inch plastic elbow with steel grippers 508NSG
Your Price: $4.50
|
3/8 x 3/8 inch plastic elbow with steel grippers 506NSG
Your Price: $4.50
|
|
|
|
|
Overflow Fitting With Nut mounts on the side of the brine tank.
Allows you to attach a hose to devert the water should the salt tank start over filling.
|
1/2" connecting ELBOW for connection 1/2" brine tubing to Air Check Brine Pickup J-Tube 1/2 " ( BPH4500 - sold separately ).
|
3/8" connecting ELBOW with steel grippers for connection 3/8" brine tubing to Air Check Brine Pickup J-Tube 3/8 " ( FP60002 - sold separately )
|
|
|
|
|
|
|
|
Thread Sealant Lock Leak Tube 39 ml
Your Price: $4.95
|
Fitting 1/4" x 1/4" x 1/4" Union Tee JG-PI0208S
Your Price: $4.95
|
3/8" Tube x 1/4" Female Threaded Adapter
Your Price: $5.00
|
|
|
|
|
Locks out Leaks
Thread sealant works better than Teflon paste or tape in most applications.
Perfect to use on any threaded fitting connection 1/4" or larger.
|
Fitting 1/4" x 1/4" x 1/4" Union Tee JG-PI0208S
|
3/8" Tube x 1/4" Female Threaded Adapter
Do not confuse this part with the 7/16" fitting used with RO faucet ( 59JGCI3212U7S )
|
|
|
|
|
|
|
|
Cap Fitting UNIDOSE Pumps PN 10299
Your Price: $5.95
|
Fitting 3/8" Tube x 7/16" RO Faucet Threaded Adapter
Your Price: $6.00
|
Fitting 3/8" x 3/8" x 1/4" Reducing Tee JG-PI301208S
Your Price: $6.95
|
|
|
|
|
Cap Fitting UNIDOSE Pumps PN 10299 for 3/8" tubing
|
3/8" Tube x 7/16" uns Female Threaded Adapter used with RO faucet ( 59JGCI3212U7S ).
|
3/8" x 3/8" x 1/4" Reducing Tee JG-PI301208S
|
|
|
|
|
|
|
|
Piercing Valve 1/4" pn S111801
Your Price: $6.95
|
1/4"f x 1/4"c Ball Valve Ell PVC
Your Price: $7.00
|
1/4"f x 3/8"c Ball Valve Ell PVC
Your Price: $7.00
|
|
|
|
|
Piercing Valve 1/4" pn S111801.
Used to tap into cold water line under sink.
|
1/4"f x 1/4"c Ball Valve Ell PVC
|
1/4"f x 3/8"c Ball Valve Ell PVC
|
|
|
|
|
|
|
|
Fitting -Drain Restrictor Elbow 1/8 m x 1/4 c
Your Price: $7.50
|
Fitting JG - Drain Restrictor Elbow 1/8 m x 1/4 tube
Your Price: $7.50
|
Tubing Brine Sears, North Star, GE, Ecowater 7089267
Your Price: $7.50
|
|
|
|
|
Drain Restrictor is in 1/8 m x 1/4 c nut Elbow used in older RO membrane housings to drain line.
NLA, substitute the John Guest version ( 59JGFR50220 ).
|
Drain Restrictor is built into this 1/8 male thread x 1/4 John Guest Elbow used commonly in connections to RO membrane housings and the drain line.
|
Special size of Brine tubing ( 5/16" O.D. with a 0132" wall thickness ).
Tubing sold in 66 inch sections ( enough to replace all lines in brine tank ).
|
|
|
|
|
|
|
|
Tubing Connection kit, UNIDOSE PN 77383
Your Price: $7.95
|
Push In repair collet and oring .25 pn 7209566
Your Price: $7.99
|
Push In repair collet and oring .38 pn 7209574
Your Price: $7.99
|
|
|
|
|
|
Tubing Connection kit, UNIDOSE PN 77383
|
Push In repair collet and oring .25" ( 1/4" ) pn 7209566
Repair part for Sears RO ( reverse osmosis ) connections.
|
Push In repair collet and oring 3/8" ) pn 7209574
Repair part for Sears RO ( reverse osmosis ) connections.
|
|
|
|
|
|
|
|
Parker 1/4 F x 1/4 JG Elbow Tank Shut Off
Your Price: $8.00
|
Tank Shut Off 1/4 F x 3/8 JG Elbow PN S1037
Your Price: $8.95
|
Float Assembly, 2310, w/30" Rod PN 60068-30
Your Price: $9.95
|
|
|
|
|
1/4" fpt x 1/4" John Guest RO Tank Shut Off Elbow, made by Parker for Microline.
Can be used on all under the sink RO holding tanks ( since they all have 1/4" mpt connections ).
|
1/4" fpt x 3/8" John Guest - RO Tank Shut Off Elbow, made by Parker for Microline ( pn S1037 ).
Also, can be used on an R.O. Holding Tank that requires a 3/8" feed line connection.
|
Float Assembly, 2310, w/30" Rod PN 60068-30
|
|
|
|
|
|
|
|
Flapper, UNIDOSE PN 27352
Your Price: $9.95
|
Plug for Dome Hole 1 1/4" - Q7006
Your Price: $12.00
|
Safety Brine Valve Assembly, 2310 ( 60014 )
Your Price: $19.95
|
|
|
|
|
|
Flapper, UNIDOSE Pumps PN 27352
|
This is the plug that caps the small 1 1/4" "fill" hole used on many acid neutralizing filter tanks.
Includes oring.
Fits in a hole in tank that measures about 1 3/4".
|
Safety Brine Valve Assembly, 2310 ( 60014 )
|
|
|
|
|
|
|
|
Injection Valve kit, UNIDOSE PN 37349
Your Price: $19.95
|
Brine Pick Up Tube with Air Check 1/2 inch H4500
Your Price: $20.00
|
In and Out Head 1 inch - 990S
Your Price: $22.95
|
|
|
|
|
|
Injection Valve kit UNIDOSE Pumps PN 37349
|
Air Check Brine Pickup J-Tube 1/2 " X 48 " Long.
Can be cut down to fit.
1/2" connecting elbow ( JF508NSG ) sold separately.
|
990S, in/out distributor head with a 1.05" distributor ( riser pipe ) opening.
Includes distributor oring and top of tank oring.
|
|
|
|
|
|
|
|
Cartridge Valve Assembly, UNIDOSE PN 36307
Your Price: $24.95
|
Gas Off Automatic Air Vent EA 122 A 1002
Your Price: $39.95
|
In and Out Head 1190 Clack D1220 New PN D1400
Your Price: $39.95
|
|
|
|
|
|
Cartridge Valve Assembly, UNIDOSE PN 36307
|
Gas Off Automatic Air Vent used with Ozone systems.
Has 1/8" male thread with shut-off valve and removable head for cleaning
|
In and Out head D1220 New MFG Part Number D1400 is made to connect using Clack Adapters ( REQUIRED )and can also be used with the By Pass Valve made for the Clack WS1 Valve and other "brands" that use the Clack type of valve under their private label.
|
|
|
|
|
|
|
|
Distributor Hub and Lateral 1 1/2 inch D7178-07 14 - 16 inch tanks
Your Price: $49.00
|
Brine Pick Up Safety Float with Air Check 1/2 inch Clack 474
Your Price: $49.95
|
Mixer - 1" inline mixer used for chlorine and peroxide KoFlo
Your Price: $99.95
|
|
|
|
|
Distributor Hub and Lateral 1 1/2 inch D7178-07 used with commercial tanks of 14",or 16" diameter.
This ABS hub and eight PVC slotted laterals must be assembled ( laterals thread into the hub ) and hub glued to a length of 1 1/2" PVC pipe to make a complete distributor pipe.
|
Brine Pick Up Safety Float with Air Check 1/2 inch Clack 474
|
KoFlo 1" inline chlorine mixer used for chlorine and peroxide systems
|
|
|
