Official PayPal Seal



  Home > Fleck > 1500 / 2500 Parts >

  Tool - Stuffer to Install Seals and Spacers - 11098
Tool - Stuffer to Install Seals and Spacers - 11098
 
Alternative Views:


Suggested Price: $49.99
Your Price: $42.00

Availability: IN STOCK
Product Code: 3411098
Qty:

Description
 
Stuffer Tool that helps when installing seals and spacers in Fleck 2500, 2510, 2700, 2750, and 2900 ( upper ) Valves.
Also, can be used with 3600 seal kit.

NOTE: This tool can be "Rented" for 1/2 the purchase price.
You would need to Purchase the Tool at full price, and we would refund 50% of the cost of the tool if you returned it within 30 days.
Please email, or enter a NOTE during check out that you wish to use this option.

Also, please Return the INSTRUCTION sheet that comes with the TOOL.


QUESTION: How hard would it be to put these parts in without it?
Can I make do with something smooth about the correct diameter or am I WAY better off to have it?

** It can be done by hand, if you have small fingers. I use to install them without the tool.
Once I got the tool, I could not imagine how I every did it without the tool.
The tool is made to exact measurements of the Seals on one end and for the Spacers on the other.
It's very simple, but not something that could be easily fabricated / duplicated.
And the manufacturer charges us a very high cost for this tool. And that is why it cost so much.

Again, if can be done without the tool, but if you drop a SEAL into the Valve slots, it will fall into the TANK below, and be forever lost.
If you are going to do this without the tool, it would be safer to remove the head from the Tank and work on a table.

You can see some directions on page 20 and 21 of this Fleck 2510 manual,
Fleck 2510 Service Manual

For RENTAL Returns:
Our Mailing and Return Ship To Address is:

Softenerparts.com
752 Commerce DR STE 12
Venice, FL 34292-1744

Related Products...

Piston Assembly Fleck 27/2750/2900 - 60090-HF
Your Price: $59.95

Add
Piston Assembly Fleck 27/2750/2900 - 60090-HF
Piston Assembly Fleck 2500, 2510 - 60090
Your Price: $39.95

Add
Piston Assembly  Fleck 2500, 2510 - 60090
Seals and Spacers Kit 60121
Your Price: $21.00

Add
Seals and Spacers Kit 60121
Brine Valve Piston Assembly 1600 Assembly 3/8
Your Price: $44.95

Add
Brine Valve Piston Assembly 1600  Assembly 3/8” PN = 60029
Tool - Stuffer Install Seals and Spacers - 11098
Your Price: $42.00

Add
Tool - Stuffer to Install Seals and Spacers - 11098

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Fleck > 1500 / 2500 Parts
Fleck > Alphabetical
Fleck > 2510 Parts
Fleck > Commercial
Fleck
Fleck > Commercial > 2900 / 2900s Parts