Liquid Sanitizer Concentrate ( 0.5 ounces ) for sanitizing Water Softeners, or ( 0.25 ounces ) for RO Units, and Water Coolers.

Please tell us which one you prefer when ordering, as we stock both packages ( same liquid inside )

Cleans and Restores Your System


INSTRUCTIONS FOR USE - Water Softener Application: Mix the 1/2 oz. Packet of Sani-System with 4 gallons of water and then pour into salt tank. Manually regenerate the softener. Double the dosage for heavily fouled units.

RO ( reverse osmosis ) Units Turn off RO system, drain storage tank and remove all filters and membrane.
Pour 1/4 ounce Packet of Sani-System into the empty pre-filter housing. Reconnect and turn on incoming water.
After the holding tank is full ( takes about 5 minutes ), let the system stand idle for 60 minutes.
Drain Holding tank.
Before the system is put back into service, flush the system with water to assure sanitizing solution is rinsed thoroughly from system.
Re-Install filters and membrane according to manufacturer's instructions.