You are here: Home > Clack, Rainsoft > Rainsoft


Above === Older Brass Valve Body ( pre 2001 )

Rainsoft timer motors in older models say Intermatic on them. And that is the only part we can provide for the older models.
( NOT the Drive Motor on the back )

Rainsoft Valve

Newer models ( Like EC4 and others ) have a many parts in common with the Fleck 5000 and Fleck ProFlo valves.
And these parts are listed below.
( since late 1998 ) === Newer Noryl Black Plastic Valve body (
used by Rainsoft, Rayne RXD 1000, and few others with their proprietary "power heads" ).

This newer valve body is based on the Fleck 5000 / ProFloSE.
View / Download Manual ( for parts reference ) ProFloSE SXT Downflow Service Manual

YouTube Video for working on the ProFlo version of the Fleck 5000 valve,
http://youtu.be/Db0cWKWju54

How To Replace Rainsoft Valve with "non-proprietary" Valve


Turbine Meter Assembly 3/4 Electronic 19797 no clips Valve Body Fleck 5000 Downflow 18815 Motor - 24 volt 1/30 rpm Rainsoft Timer - 17493
Valve Body Fleck 5000 Downflow Proflo SE Rainsoft newer
Usually Ships in 2 to 3 Weeks
Your Price: $79.00
3/4" Electronic Turbine Meter Assembly for Fleck Models, such as the 5000SE, 5600SE, 2510SE, 8500SE and all SXT controlled Valves.
Includes orings, but NO clips,or screws.
Valve Body ( with NO internal parts ) for Downflow Fleck 5000, Proflo SE, and others water softener valves.
Also used in newer Rainsoft Valves ( as it is based on the Fleck 5000 Valve Body design.
* Special Order Item - 2 week lead time before shipping
Rainsoft New Timer Motor 24 volts for more recent models, PN 17493

Transformer - 24 volt 1660mA Rainsoft OTE-40-24-ACDC-N PTC, also referenced as PN 17000. Motor 24 Volt Intermatic Timer  CW190-1 CW190-2 Piston Assembly Downflow Proflo SE 60115-00
Transformer - 24 volt 1660mA Rainsoft OTE-40-24-ACDC-N PTC, also referenced as PN 17000.
Transformer cord-with special fitting sold separately ( Cable - Rainsoft 2 wires 18 AWG and Connector = PN RS92616A )

CW-190-1 Intermatic Timer Motor 24 volts 60 Hz used in Rainsoft and very old Fleck timer assemblies.
The letters and first three numbers are the identifier for these Intermatic Timer Motors. The number after the dash is usually a 1 or a 2, but is not important when making your replacement. So the CW190-1 and CW190-2 would be the same 24 volt motor.



Piston and shaft Assembly for Downflow Fleck 5000, Proflo SE, and others water softener valves.
Also used in newer Rainsoft Valves ( as it is based on the Fleck 5000 Valve Body design.
Note, the Piston Body is smaller than the Upflow version ( 60115-10 )
Motor 125 Volt Intermatic  WG190-1 WG190-2 Yoke 1"   Stainless Steel -13398 4102601 Cage Check Ball Assembly for Injector Rainsoft
Yoke 1" Stainless Steel -13398 4102601
IN STOCK
Your Price: $45.00
Cage Check Ball for Injector Rainsoft
IN STOCK
Your Price: $36.00
WG-190-2 Intermatic Timer Motor used in Rainsoft and very old Fleck timer assemblies.
The letters and first three numbers are the identifier for these Intermatic Timer Motors. The number after the dash is usually a 1 or a 2, but is not important when making your replacement. So this 125 volt version with part numbers WG190-1 or WG190-2 are the same.
1" female NPT Yoke for Fleck Valves.
Stainless Steel has replaced the Brass used in the past.
Cage Check Ball Assembly for Injector Rainsoft
Added to Injector Assembly in newer Rainsoft Valves
By Pass Valve Plastic Fleck - 60049 Yoke 3/4" Stainless Steel Fleck - 13708 Cam, Brine, Rainsoft  P/N 17501
Cam, Brine, Rainsoft P/N 17501
IN STOCK
Your Price: $24.95
Plastic By Pass Body for Fleck 5600, 2510, and 9000.
Requires an additional YOKE to connect to your plumbing.
Yoke 3/4" Stainless Steel Fleck - 13708 41027-01
3/4" female thread connection.
Cam, Brine, Rainsoft P/N 17501
Also used in some, but not all, newer Rainsoft Valves

Seals and Spacers Kit  Fleck 5000 Proflo SE PN 60120 Cable - Rainsoft 2 wires 18 AWG 92616A. UL E60233-8 and Connector Transformer, D-TRANS, 24 volt, 60 HZ, AC, 450 ma, includes twin lead wiring.
* SPECIAL Seals and Spacers Kit PN 60120 for Fleck 5000, Proflo SE, and others.
Also used in newer Rainsoft Valves ( as it is based on the Fleck 5000 Valve Body design.
Includes 5 Seals, 4 regular Spacers, and 1 special End Spacer.
Cable - Rainsoft 2 wires 18 AWG 92616A. UL E60233-8 and Connector
Transformer cord-with special fitting
Transformer, D-TRANS, 24 volt, 60 HZ, AC, 450 ma, includes twin lead wiring.
Transformer 24 Volt AC 60 Hz,XT-2420 DLFC Housing 2500/2510/2700/3600 PN 11385 or 60705-00 Injector ProFlo Fleck and Rainsoft 18272-3
Transformer 24 Volt AC 60 Hz
IN STOCK
Your Price: $19.95
Injector ProFlo Yellow # 3 PN 18272-3
IN STOCK
Your Price: $9.95
24 Volt AC Output Transformer 20 VA, Input 120 Volt 60 Hz 0.23 A

DLFC Housing 2500/2510/2700/3600 PN 11385 or 60705-00
Includes Oring 11183.
DLFC button is available separately, or you can re-use your old one.

Injector # 3 ( 18272-3 ) YELLOW for Fleck 5000, 8500, Twinflo 100E, Proflo SE, and a few others.
Also used in newer Rainsoft Valves ( as it is based on the Fleck 5000 Valve Body design.
Injector ProFlo Fleck and Rainsoft 18272-2 Injector ProFlo Fleck and Rainsoft 18272-0 Injector ProFlo Fleck and Rainsoft 18272-00
Injector ProFlo Blue # 2 PN 18272-2
IN STOCK
Your Price: $9.95
Injector ProFlo Red # 0 PN 18272-0
IN STOCK
Your Price: $9.95
Injector # 2 ( 18272-2 ) BLUE for Fleck 5000, 8500, Twinflo 100E, Proflo SE, and a few others.
Also used in newer Rainsoft Valves ( as it is based on the Fleck 5000 Valve Body design.
Injector # 0 ( 18272-0 ) RED for Fleck 5000, 8500, Twinflo 100E, Proflo SE, and a few others.
Also used in newer Rainsoft Valves ( as it is based on the Fleck 5000 Valve Body design.
Injector # 00 ( 18272-00 ) VIOLET for Fleck 5000, 8500, Twinflo 100E, Proflo SE, and a few others.
Also used in newer Rainsoft Valves ( as it is based on the Fleck 5000 Valve Body design.
Injector ProFlo Fleck and Rainsoft 18272-000 Injector ProFlo Fleck and Rainsoft 18272-1 By Pass O-Ring Kit  for Plastic Fleck - 60049
Injector ProFlo White # 1 PN 18272-1
IN STOCK
Your Price: $9.95
Injector # 000 ( 18272-000 ) BROWN for Fleck 5000, 8500, Twinflo 100E, Proflo SE, and a few others.
Also used in newer Rainsoft Valves ( as it is based on the Fleck 5000 Valve Body design.
Injector # 18272-1 WHITE for Fleck 5000, 8500, Twinflo 100E, Proflo SE, and a few others.
Also used in newer Rainsoft Valves ( as it is based on the Fleck 5000 Valve Body design.
O-ring Kit for the Plastic By Pass Body 60049
KIT INCLUDES the following,
1 ) Tube of Silicone, AP1013501
2 ) O-ring, 13305
2 ) O-ring, 7170288
4 ) O-ring, 17990 ( - 218 )
Total of ( 8 ) o-rings) with one tube of Silicone.
Brine Valve Piston Assembly Fleck 5600 and 5000 - 60032 Yoke 3/4"  Male Plastic - 1870602 Yoke 1" Male Plastic - 18706
Yoke 3/4" Male Plastic - 1870602
IN STOCK
Your Price: $9.95
Yoke 1" Male Plastic - 18706
IN STOCK
Your Price: $9.95
60032 Brine Valve Piston Assembly for Fleck 5600 ( also used in 5000, 6600, 6700, ProFlo Valves ). Measures 2 5/16" tall.
Also, used in Rainsoft Silver Series valves.
3/4" Yoke Male Plastic used instead of metal by pass, or used with plastic by pass. 1" Yoke Male Plastic used instead of metal by pass, or used with plastic by pass.
Rod, Piston Proflo SE 18267 Cam, Brine, Downflow, P/N 18228 Proflo SE Seal 13242 sold in 5 pack
Rod, Piston Proflo SE 18267
IN STOCK
Your Price: $9.95
Seal 13242 sold in 5 pack
IN STOCK
Your Price: $7.50
Rod shaft only for the Fleck 5000, Proflo SE, and others.
Also used in newer Rainsoft Valves ( as it is based on the Fleck 5000 Valve Body design.
Cam, Brine, Downflow, P/N 18228 for the Fleck 5000, Proflo SE, and others.
Also used in some, but not all, newer Rainsoft Valves

Seal 13242 sold in 5 pack
By Pass Tool PN 41891 for Plastic Fleck Injector Ball 3/16" Part No 11482 Adapter Coupling 19228
By Pass Tool for Plastic Fleck
In Stock
Your Price: $5.45
Injector Ball 3/16" Part No 11482
IN STOCK
Your Price: $4.95
T-handle Tool used to help turn the shut off valves on the Plastic By Pass Body 60049 3/16" injector Ball used before the injector screen in the Fleck 4200 valve.
SPECIAL ORDER Item Allow 2-3 weeks for shipping
One Adapter coupling Kit = one coupler ( 19228 ), two o-rings ( 13305 ), one clip ( 13255 ), and one screw (13314 ).
Sold Individually, so order 2 if you need a pair.
DLFC Button 10 gpm Fleck ProFloSE valve 16529 Seal oring for Injector 4200 ProFlo SE 18301 Distributor - Top 1.05 Twist On - MD1203 or 18280

DLFC Button 10 gpm Fleck 16529 Drain Line Flow Control ( DLFC ).

Seal o-ring used for the Fleck 5000, Proflo SE, and others.
Also used in newer Rainsoft Valves ( as it is based on the Fleck 5000 Valve Body design ).
1.05 Top Distributor Twist On Style used on Newer Fleck and Autotrol Control Valves.
Old part number 23D1203, new part numbe MD1203.
Replaces Fleck p.n. 18280 collector, top, 1" x .011, gray
Oring - Tank Adapter 5000, 2510, 9100 PN 18303 Screen for Injector ProFlo Fleck and Rainsoft 18271 Oring - Distributor 1.05 # 13304
O-ring - Distributor 1.05 # 13304
IN STOCK
Your Price: $2.00
Tank O-ring 18303 used on Fleck 5000, 2510, and 9100 tank adapters Screen for Injector ProFlo Fleck and Rainsoft 18271 Distributor Oring 1.05" ( also called 1" )
Used on Fleck 5600, and 2510 Valves
Brine Line Flow Control .50 BLFC Button Flow Straighter for Metered Valves 14613 Silicone 1 Gram Tube Lubricant for O-rings
.50 gpm BLFC Button used in Fleck Valves to regulate the refill rate during Brine Refill.

Flow Straighter for Metered Valves 14613 used on most residential Fleck Metered Valves.
Includes Fleck 5600, 9000, 9100, 2500 and 2510.

One gram of food grade silicone for use with o-rings, gaskets and seals.
Enough to lubricate about a dozen or more o-rings and seals.
These tubes come from one of the leading valve manufacturers.

Retaining Clip for DLFC Housing 2510 - 18312 Screw used with Fleck Adapter Clip pn 13314 Fitting, Drain 1/2 m x 1/2 Barbed
Fitting, Drain 1/2 m x 1/2 Barbed
IN STOCK
Your Price: $1.00
Clip used to hold Plastic Drain Line Flow Control Housing. ( PN 11385 ) used with Fleck 2510 Valves.
Screw for Adapter Clip used on various Fleck Valves.
Each valve will have at least two, and metered valves will have four.
1/2" male thread  x 1/2" Barbed slip on fitting
Oring - Adapter Coupling 13305 Oring Brine Valve 13302 quantity one Oring BLFC Fitting 5600 - 12977
O-ring - Adapter Coupling 13305
IN STOCK
Your Price: $1.00
O-ring Brine Valve 13302 quantity one
IN STOCK
Your Price: $1.00
O-ring BLFC Fitting 5600 - 12977
IN STOCK
Your Price: $1.00
O-ring 13305 for Meter Module 2510, 5600, 9000, and 9100.
Also, used on Adapter Couplers of these Valves and other Fleck Valves.
Sold individually, so order the amount you need ( usually 2 or 4 ).

O-ring used with the Brine Valve Piston Assembly.
There are Two used in the Valve Assembly.
One on the Brine Valve and One in the Hole that the Brine Valve sits inside.

Oring used on brass 3/8" brine fitting ( which is part # 13244 ).
Oring 25/27 DLFC Housing
O-ring 25/27 DLFC Housing
IN STOCK
Your Price: $1.00
Oring 1500, 2500, and 2700 Drain Line Flow Control Housing