|
|
|
|
|
|
|
|
|
Sediment Pre Filter Spun Poly P5 10 inch Best sediment only pre-filter for all standard reverse osmosis drinking water systems.
|
Matrikx CTO 2 is a 5 Micron 10" Carbon Block
The most commonly used replacement filter
Can be used as Prefilter and Post filter in most RO systems.
|
|
|
|
|
|
|
|
|
|
|
10" Sealed Carbon 5 Micron Inline
1/4" female thread openings
|
4 Stage TFC Reverse Osmosis Unit, 50 gallon per day production rate. Pre-filter, Carbon Block filter, Membrane, and Activated Carbon Inline post-filter.
|
|
|
|
|
|
|
|
|
|
|
|
Automatic Shut-Off ( ASO ) Valve w/JACO fittings
|
Automatic Shut-Off ( ASO ) Valve w/JG fittings
|
|
|
|
|
|
|
|
|
|
|
20" x 4 5/8" Carbon Block Filter rated 5 micron. Replacement cartridge used in Big Blue Housing.
|
20" x 4.5" Sediment Filter rated 5 micron. Replacement cartridge used in Big Blue Housing.
|
|
|
|
|
|
|
|
|
|
|
Watershield Super Big Pump 3 Stage Reverse Osmosis Drinking Water System. Features Permeate booster pump for faster production of drinking water.
|
EPM 20, Carbon Block Filter 20" in length and approximately 2 1/2" in diameter with a 5 Micron rating. Used as either / both Pre-Filter or / and Post Filter
|
|
|
|
|
|
|
|
|
|
|
Watershield Classic 3 Stage Reverse Osmosis Drinking Water System. Pre-filter, 36 gpd Membrane, Post-filter, Holding Tank, Faucet, and Installtion Kit ( plus Manual ).
|
Drain Clamp with 1/4" connection. For drain lines that come directly from the RO unit and no Air Gap Faucet used.
|
|
|
|
|
|
|
|
|
|
|
Drain Clamp with 3/8" connection. PN S1117-01 For drain lines that come down from the Air Gap Faucet.
|
Faucet - Brush Nickel Long Reach replacement faucet with 1/4" fitting. If you have 3/8" tubing, you can reuse your old connector. If your faucet has 3 lines of tubing connected to it, then it is the "Air Gap" version. This item ( 930314W ) is considered "non air gap".
|
|
|
|
|
|
|
|
|
|
|
Long Reach replacement faucet with 1/4" fitting. If you have 3/8" tubing, you can reuse your old connector. If your faucet has 3 lines of tubing connected to it, then it is the "Air Gap" version. This item ( 930314W ) is considered "non air gap".
|
Long Reach Faucet with Air Gap and 1/4" O.D. water line fitting. Has connections for three lines used with "air gap" type Reverse Osmosis installations.
|
|
|
|
|
|
|
|
|
|
|
|
Pentek R50-BB, 10" x 4 5/8" Sediment Poly-ester Filter rated 50 micron
|
Sold as one Case of ( 20 ) Filters MB-01-20 1 Micron GE Osmonics 1013239 2-1/2 x 20" long Standard 1 micron spun polypropylene sediment filter cartridge for residential water filters for removal of dirt, rust & sediment SPECIAL ORDER Item, please allow 2 weeks lead time for shipping.
|
|
|
|
|
|
|
|
|
|
|
|
1/4" Tube x 7/16" uns Female Threaded Adapter used with RO faucet ( 59JGCI3208U7S ).
|
Fitting 1/4" x 1/4" Union Elbow JG-PI0308S S1406
|
|
|
|
|
|
|
|
|
|
|
|
Fitting 1/4" x 1/4" x 1/4" Union Tee JG-PI0208S
|
3/8" Tube x 7/16" uns Female Threaded Adapter used with RO faucet ( 59JGCI3212U7S ).
|
|
|
|
|
|
|
|
|
|
|
|
Fitting 3/8" x 1/4" Reducing Union JG-PI201208S
|
Fitting 3/8" x 3/8" Union JG-PI0412S
|
|
|
|
|
|
|
|
|
|
|
|
3/8" x 3/8" x 1/4" Reducing Tee JG-PI301208S
|
Fitting 3/8" x 3/8" x 3/8" Union Tee JG-PI0212S
|
|
|
|
|
|
|
|
|
|
|
|
Drain Restrictor is built into this 1/8 male thread x 1/4 John Guest Elbow used commonly in connections to RO membrane housings and the drain line.
|
Low Pressure Gauge in one pound increments to check your R.O. Storage Tank ( proper pressure is 7 - 8 lbs. ).
|
|
|
|
|
|
|
|
|
|
|
|
Granular Activated Carbon Cartridge
|
Housing for standard Membrane, PN RP2500. Should fit all reverse osmosis membrane - standard size 1.75" X 11.75"
|
|
|
|
|
|
|
|
|
|
|
Housing - with 3/4" inch FPT threaded inlet and outlet openings ( common for most as pre-filter housing before water softener ). Holds "standard" 10 inch x 2 1/2" filters.
|
Housing Pre-Filter 3/4" x 20" DH150069 20-07B-PR has 3/4 inch FPT threaded inlet and outlet openings Holds "special" LONG 20 inch x 2 1/2" filters.
|
|
|
|
|
|
|
|
|
|
|
|
Housing, Slimline 1/4 inch, threaded inlet and outlet openings, DH4200W25
|
Housing - Slimline 3/8 inch threaded inlet and outlet openings
|
|
|
|
|
|
|
|
|
|
|
SET of 4 items > TFC 50 gpd Membrane, Prefilter, Post, Inline GAC Cartridge
Includes, as shown in photo:
( 1 ) 23S121005 - 5 micron sediment prefilter
( 1 ) 633225E12 - 5 micron carbon block filter
( 1 ) 24TFC50 - Membrane, 50 GPD TFC
( 1 ) 54GS10RO - 10" Inline GAC post filter
|
20" in length and approximately 2 1/2" in diameter with a 5 Micron rating. Pre-Filter Spun - Poly used in large commercial reverse osmosis systems and some home whole house filter housings.
|
|
|
|
|
|
|
|
|
|
|
Membrane, Dow Filmtec � TW30-1812-24 24 GPD TFC RO reverse osmosis membrane - standard size 1.75" X 11.75"
Standard size membrane can be used as a replacement for most TFC model Reverse Osmosis.
|
Membrane, 36 GPD TFC RO reverse osmosis membrane - standard size 1.75" X 11.75"
Standard size membrane can be used as a replacement for most TFC model Reverse Osmosis.
|
|
|
|
|
|
|
|
|
|
|
Membrane, Dow Filmtec TW30-4021 TFC RO reverse osmosis membrane - size 4" X 21" Equilvalent Membrane will be shipped, not Filmtec.
|
14 - 16 Gallons Per Day CTA Membrane measures 11 3/4" and is commonly used in standard CTA Reverse Osmosis system installed on chlorinated "city" water. Sold in hundreds of different "Brands".
|
|
|
|
|
|
|
|
|
|
|
Newer 50 GPD TFC Revised Seal Membrane used in Clack TFC-300, and TFC-400 S1764RS is used in the newer "50 gpd" models that look like Microline, but do not use this name, but instead has model number like the T.F.C. - 300 and - 400.
|
50 GPD (gallons per day) TFC style reverse osmosis membrane RO - Fits Standard Size Membrane Housing. Tip to tip length 11.75 inches.
|
|
|
|
|
|
|
|
|
|
|
Meter measures the Total Dissolved Solids ( TDS ) in your water.
Use to determine if your Membrane is still working properly. Offers Standard ( 0 - 999 ppm ) and High ( 1000 - 9990 ppm ) range for testing brackish water sources.
|
Microline Reverse Osmosis ( STF35ANGNM or TFC-335 ), is now 35 gallon per day with a 50 gpd T.F. C. membrane ( S1229RS ), Carbon Block Prefilter ( S7028 ), GAC Post Filter ( S7025 ) with storage tank and all accessories to install.
|
|
|
|
|
|
|
|
|
|
|
|
O-ring for Housing Slimline 1/4 inch DH4200W25 PN DMOR4
|
O-ring for Housing Slimline 3/8 inch DH150005 PN 151121
|
|
|
|
|
|
|
|
|
|
|
|
Oring for 1/4" Tubing Retainer John Guest and Parker Quick Connect.
|
Oring Sump Big Blue DM151122 OR-100
|
|
|
|
|
|
|
|
|
|
|
|
Buna-N square cut o-ring, part number 151254
|
1/4" fpt x 1/4" John Guest RO Tank Shut Off Elbow, made by Parker for Microline. Can be used on all under the sink RO holding tanks ( since they all have 1/4" mpt connections ).
|
|
|
|
|
|
|
|
|
|
|
|
Permeate Pump - ERP1000
|
Piercing Valve 1/4" pn S111801. Used to tap into cold water line under sink.
|
|
|
|
|
|
|
|
|
|
|
Push In repair collet and oring .25" ( 1/4" ) pn 7209566
Repair part for Sears RO ( reverse osmosis ) connections.
|
Push In repair collet and oring 3/8" ) pn 7209574
Repair part for Sears RO ( reverse osmosis ) connections.
|
|
|
|
|
|
|
|
|
|
|
Liquid Sanitizer Concentrate for sanitizing Water Softeners, RO Units, and Water Coolers. Cleans and Restores Your System
|
One gram of food grade silicone for use with o-rings, gaskets and seals. Enough to lubricate about a dozen or more o-rings and seals. These tubes come from one of the leading valve manufacturers.
|
|
|
|
|
|
|
|
|
|
|
3.2 gallon R.O. Storage Tank, White, pre-charged to 8 psi, is a compatible replacement for any brand of reverse osmosis. Has standard 1/4" mpt fitting used with all undersink RO Storage Tank systems. PN C2000 or RO-132
|
1/4" fpt x 3/8" John Guest - RO Tank Shut Off Elbow, made by Parker for Microline ( pn S1037 ). Also, can be used on an R.O. Holding Tank that requires a 3/8" feed line connection.
|
|
|
|
|
|
|
|
|
|
|
This kit performs 6 different tests. Two test strips for each. Iron content ( in ppm ), the pH level and the hardness ( in ppm and grains ), total alkalinity ( in ppm ), Nitrate and Nitritate ( as N ) in ppm.
|
Tester measures the Total Dissolved Solids ( TDS ) in your water. If TDS is above 80 ppm, it will Test BAD, otherwise, the Green GOOD light will come on.
NOTE: Works on all City water or most well water whose starting TDS is less than 1000 ppm.
|
|
|
|
|
|
|
|
|
|
Wrench for Slimline 1/4 inch DH4200W25 - DMWR100
|
|