|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bearing Large Version 7171250 WS26X10009
|
Complete Brine Valve Assembly, part # 7116488 or 7310197, also called WS15X10005 for GE models.
|
Larger version 1" By Pass Valve 7214383, WS15X10026. This Kit includes the By Pass Body 7179143 ( 7214317 ), 2 Clips 7175238 ( 7089306 ), and 2 orings 7173016.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cam & Gear used on the Larger version 1" valve. PN 7283489 or WS26X10008
|
Cap for Nozzle Venturi Assembly pn 7199729
|
Clip for Nozzle Venturi Assembly pn 7081201, GE part number WS03X10018
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clip to 1" adapter or by pass used on a few of the LARGER 1" Valves under the Sears, North Star, GE, and Ecowater name.
This clip's O.D. is 2" and the smaller version ( 7116713 ) has an O.D. of 1 3/4".
|
Larger version 1" I.D. Copper Tube, part number 7077642.
The system REQUIRES Two of these, so order accordingly.
Orings, 7170262, sold separately.
|
71050 - MD1236 - Distributor -Bottom 1.05 O.D.
Used to make Distributor Tube with a piece of 3/4" PVC Pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drain adapter barbed larger version PN 7271270, used on Larger version 1" valve body ( 7171145 ).
|
Drain Clip ( 7169180 ) used on Larger version 1" valve body ( 7171145 ) with large drain adapter ( 7172793 ).
|
Drain hose adaptor ( 7172793 ) used on Larger version 1" valve body ( 7171145 ).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.1 Flow Plug used on Sears, North Star, and some G.E. softeners.
GE part # WS22X10020
|
Fill Flow Plug ( 0.22 gpm ) - 7147798 Button used on Extra High Capacity Units.
Used in NorthStar NST70UD1
|
0.3 BLFC Button used on Sears, North Star, and some G.E. softeners.
GE part # WS22X10021
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Float for Brine Valve Assembly - 7097202
|
Float Seal for Brine Valve Assembly - 0516947
|
Float, Stem & Guide Assembly, part # 7113008, also called PS311318 for GE models.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Float Stop for Brine Valve Assembly - 0513860
|
Float Weight - Ceramic ( 0505957 or 7168647 )
|
Gasket used on all nozzle venturi types, part # 7204362 and 7163663 and 7082582, GE part # WS08X10006
Sears, Kenmore, GE, North Star, Whirlpool, and others.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Housing for Nozzle Venturi Assembly pn 7081104
|
Installation Adaptor Tube 1 Inch NPT Plastic 7271204
|
24 Volt Drive Motor with INSTRUCTIONS Used on Sears, North Star, GE ( PN # WS26X10011 ),and Ecowater Model 1000.
Replaces PN 7152298, 7082582, 7070462, 7133008, 7285944, 7252381, 7218793,or WS26X10011 or WS26X10006 are the same 24 Volt Drive Motor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Motor Black Plastic 7286039 old PN 7234731 or 7228900 or 7228544 or 7252381 and manufacturer authorized substitution for 7250622
|
Nozzle Venturi with Gasket assembly for Sears, Kenmore, and NorthStar residential size water softeners.
Part # 7114533 or WS08X10007
Color Blue
|
O-ring Seal for Drain Plug pn 7170204
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
O-ring ( 7170262 ) Seal for Nozzle Venturi Assembly Cap on most Sears, North Star, GE, and Ecowater systems.
Also used on Inlet and Outlet connections of large 1" valves.
|
Distributor o-ring ( 13/16" x 1-1/16" - 7170254 ) . Fits on the top of the pipe in the resin tank, and the valve body slides over it.
|
O-ring 7173016 ( 1.109 I.D. x 1.387 O.D.) - sold individually, FOUR ( 4 ) Required for use inside the Larger version 1" By Pass Valve 7214383
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oring kit shown as # 5, PN 7112963 ( includes oring # 6, # 7, and # 8, part numbers 7170296, 7170254, 7170270 ) in our diagram.
GE cross Kit reference # WS35X10001.
|
Plug for Drain Seal Sears, GE, NorthStar 7171187
Used in the Large "1" valve body ( the one with 8 screws around cover, not the 3/4" valve, which has only 5 screws ).
|
Retainer, Bottom of Float Stem 0516924
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Larger version 1" valve uses a Rotor Disc ( 7185500, WS26X10010 ) and Seal Kit ( 7185487, WS35X10020 ) that is one inch wider in diameter.
Rotor Disc is 4 3/8" in diameter.
The standard version Rotor Disc ( 7199232 ) we sell is more commonly used and smaller ( only 3 3/8" in diameter ).
|
Screw ( #10-14 x 2 5/8" ) PN 7172997 for Valve Body Large valve ( required 8 screws ) used on many Sears, North Star, GE, and some Ecowater systems.
GE part # WS02X10024
|
Larger version 1" valve uses a Rotor Disc ( 7185500, WS35X10020 )and Seal Kit that is one inch wider in diameter.
Rotor Disc is 4 3/8" in diameter.
The standard version Seal Kit ( 7129716 ) we sell is more commonly used and smaller in size.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Seal, Bottom of Float Stem 0516211
|
One Gram tube of Grease Silicone for use on all o-rings.
|
Tubing Assembly with retainer 7113016
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Turbine Meter for LARGER 1" models of Sears, GE.
This is ONLY the Turbine ( 7101548 ).
Cross references to GE part number WS19X10008
|
Turbine Support for Sears, GE, NorthStar 7094898 for LARGER 1" models of Sears, GE.
This is the Turbine Support ( 7094898 ) ONLY.
GE part number WS19X10008
|
Larger version 1" valve body 7171145, WS15X10025 uses a Rotor Disc ( 7185500, WS35X10020 )and Seal Kit that is one inch wider in diameter than the more common 3/4" valve body.
Rotor Disc is 4 3/8" in diameter.
Uses Valve Cover 7171161, WS13X10013.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Larger version 1" valve cover 7171161, WS13X10013 for use with Valve Body 7171145 and NOT smaller 7082053.
|
Venturi Nozzle Assembly 7253808 for Sears, and North Star Large Capacity Units
Blue Nozzle.
|
Wave Washer Large Version 7175199 WS03X10034
|
|
|
|
|
|
|
|
|
|
|
|
Wiring Harness Sensor Housing and Cam Switch for newer 1" softener valves
Part Number 7276084 or 7248722.
|
|
|
Fleck
Standard Parts
