You are here: Home > Fleck > 9000 9100 Parts

Fleck 9000 / 9100 Econominder


Twin Tank Set Up

Air Check Assembly

2nd Tank Adapter

Drive Assembly

Control Valve Assembly

Timer Assembly

3/4" Meter Assembly

1" Meter Assembly

Service Assembly

Common parts listed below **** CLICK on Diagrams to ENLARGE


9000 or 9100 Rebuild Kit Pistons and Seals Adapter Assy 2nd Tank 9000 - 14864-01 Adapter Assy 2nd Tank 9100 - 14865 Adapter Clip Fleck PN 13255
Adapter Assy 2nd Tank 9000 - 14864-01
IN STOCK
Your Price: $139.95
Adapter Assy 2nd Tank 9100 - 14865
IN STOCK
Your Price: $39.95
Adapter Clip Fleck PN 13255
IN STOCK
Your Price: $1.50
Rebuild Kit Fleck 9000 or 9100 Valve,
Our 9091PSKIT includes
Top Piston Assembly 60400
Bottom Piston Assembly 60401
Top Seals and Spacers 60125
Bottom Seals and Spacers 60421
Adapter Assy 2nd Tank 9000 - 14864-01
This is the part that screws onto the 2nd Tank used with 9000 valve.
Included parts labelled # 1, #3, # 4 ( distributor oring and top of tank oring ).
Adapter Assy 2nd Tank 9100 - 14865
This is the part that screws onto the 2nd Tank used with 9100 valve.
The Distributor Adapter ( 61419 ) is sold separately.
Assembly is marked # 7 in diagram.
Adapter Clip used commonly on Fleck Valves.
Including the 5600, 9000, 9100, 2510, 8500, and others.
Adapter Coupler Fleck  w/Oring 15078-01 Air Disperser for Fleck Valves Back Plate Fleck 9000 9100 9500 power head part 15131 Brine Fitting BLFC Brass For 5600 part 13244
Air Disperser for Fleck Valves
IN STOCK
Your Price: $0.50
Adapter Coupler, pn # 15078-01 with orings ( 13305 ) used to connect yoke to second tank adapter on the Fleck  9000 and Fleck 8500 ( now called the TwinFlo 100E ). Air Disperser for Fleck Valves Fleck 9000, 9100, and 9500 all use the same Back Plate for the power head.
This is just the bare plate ( pn 15131 ) , you'll have to transfer all the parts to it.
Brass 3/8" Brine Fitting (B.L.F.C. ) used on Fleck 5600.
Oring, BLFC button, and BLFC retainer sold separately.
Brine Fittings Brass Nut Ferrule and Insert Kit 60900-38 includes 10329 10332 10330 12767 Brine Line Flow Control .50 BLFC Button Brine Valve Assembly for 9000 /9400/8500/TwinFlo100 - 60350 By Pass Bottom Plate 11986
By Pass Bottom Plate 11986
Usually Ships in 2 to 3 Weeks
Your Price: $9.95
Brass 3/8" Brine Nut( 10329 ), Insert ( 10332 ), and plastic Ferrule ( 10330 ).
Brine Line installation kit 60900-38.
.50 gpm BLFC Button used in Fleck Valves to regulate the refill rate during Brine Refill. Brine Valve Assembly used in Fleck 9000, 9100 and also the rare 9400 Valve ( InAqua, or Ultimate II ).
Also used in the Fleck 8500 and TwinFlo 100.
PN 11986, Bottom Plate For Fleck Metal By Pass Valves.
Works with all versions and both 3/4" and 1" sizes.
*** Special Order item - Shipping in 2 to 3 weeks

By Pass Handle Lever 11979 Label, 13604-01, For Fleck Metal By Pass Valves. By Pass O-Ring Kit  for Plastic Fleck - 60049 By Pass Seal Gasket 11726
By Pass Handle Lever 11979-02
IN STOCK
Your Price: $6.95
By Pass Label standard 13604-01
Usually Ships in 24 Hours
Your Price: $1.95
By Pass Seal Gasket 11726 or 14105
IN STOCK
Your Price: $7.95
PN 11979, Handle Lever For Fleck Metal By Pass Valves.
Works with all versions and both 3/4" and 1" sizes.
Label, 13604-01, For Fleck Metal By Pass Valves.
Works with all versions and both 3/4" and 1" sizes.

O-ring Kit for the Plastic By Pass Body 60049
KIT INCLUDES the following,
1 ) Tube of Silicone, AP1013501
2 ) O-ring, 13305
2 ) O-ring, 7170288
4 ) O-ring, 17990 ( - 218 )
Total of ( 8 ) o-rings) with one tube of Silicone.
By Pass Seal Gasket ( old PN 11726, new PN 14015 ) for Fleck Metal By Pass Valves.
Older versions were Brass, or Nickel Plated Brass.
Newer versions are Stainless Steel.
This Seal Gasket works with all versions and both 3/4" and 1" sizes.
By Pass Tool PN 41891 for Plastic Fleck 11978, Top Plate For Fleck Metal By Pass Valves. By Pass Valve 1" Fleck By Pass Valve 3/4" Fleck
By Pass Tool for Plastic Fleck
In Stock
Your Price: $5.45
By Pass Top Plate 11978
Usually Ships in 2 to 3 Weeks
Your Price: $11.95
By Pass Valve 1" Fleck
IN STOCK
Your Price: $57.99
By Pass Valve 3/4" Fleck
IN STOCK
Your Price: $52.99
T-handle Tool used to help turn the shut off valves on the Plastic By Pass Body 60049 PN 11978, Top Plate For Fleck Metal By Pass Valves.
Works with all versions and both 3/4" and 1" sizes.
* Label ( 13604-01 ) sold Separately.

** Special Order Item - 2 to 3 weeks lead time before shipping.
1" By Pass Valve for Fleck 5600, 2510, and 9000 Valves.
Now stainless steel ( older models were brass ).
3/4" By Pass Valve for Fleck 5600, 2510, and 9000 Valves.
Now stainless steel ( older models were brass ).
By Pass Valve Plastic Fleck - 60049 Cam Fleck 9000 9100 9500  15132 now pn 17331 Cam Fleck 9000 9100 9500 triple cam 17331 Cover New Environmental Style Fleck - PN 6021902
Plastic By Pass Body for Fleck 5600, 2510, and 9000.
Requires an additional YOKE to connect to your plumbing.
Cam, 9500, white, # 17331 is now used for 9000, 9100 and 9500 power heads.
Can be used to replace Triple Cam ( black ) for the Fleck 9000,and 9100 ( PN 15132 ) which is now obsolete and has been replaced by the part number 17331 ( white cam also used on 9500 ).
Cam, 9500, white, # 17331 is now used for 9000, 9100 and 9500 power heads.
Can be used to replace Triple Cam ( black ) for the Fleck 9000,and 9100 ( PN 15132 ) which is now obsolete and has been replaced by the part number 17331 ( white cam also used on 9500 ).
New Style Cover for Fleck 2510, 2750, 2850, 2900, 9000, 9100 and 9500 Fleck valves that have the special hinged back plate.
Cover includes plastic hinge pin.
Cover old designer Fleck 25/27/28/29/9000 60232-110 Cross Over Pipes to 2nd Tank 9100 - 60425-12 Cross Over Pipes to 2nd Tank 9100 - 60425-16 Distributor - Top 1.05 Twist On - MD1203 or 18280
Old Style Designer Cover used on Fleck 1500, 2500, 2510, 2700, 2750, 2850, 2900, 9000 , 9100 and 9500 Valves.
PN 60232-110
Cross Over Pipes to 2nd Tank 9100 - Assembly # 60425-12
Sized to use with tanks between 6" to 12" in diameter and Fleck 9100 valve.
Assembly is marked # 6 in diagram.
Cross Over Pipes to 2nd Tank 9100 - Assembly # 60425-16
Sized to use with tanks between 12" to 16" in diameter and Fleck 9100 valve.
Assembly is marked # 6 in diagram.
1.05 Top Distributor Twist On Style used on Newer Fleck and Autotrol Control Valves.
Old part number 23D1203, new part numbe MD1203.
Replaces Fleck p.n. 18280 collector, top, 1" x .011, gray
DLFC Retainer Fleck- 13173 Drain Fitting, 1/2 m x 1/2 Barb, Elbow End Plug Fleck 9000 PN 13446 Plastic Ferrule ( 10330 ) used on 3/8" O.D. Brine Line. Delrin Sleeve (3/8 Tube)
DLFC Retainer Fleck- 13173
IN STOCK
Your Price: $2.49
Drain Fitting, 1/2 m x 1/2 Barb, Elbow
IN STOCK
Your Price: $1.50
End Plug White PN 13446
Usually Ships in 24 to 48 Hours
Your Price: $14.95
Drain Line Flow Control ( DLFC ) Retainer For 5600 and 9000 Injector Drain Modules. Drain Fitting, 1/2" male thread x 1/2"  Barbed, Elbow. End Plug Fleck 9000 PN 13446 Plastic Ferrule ( 10330 ) used on 3/8" O.D. Brine Line.
Flow Straighter for Metered Valves 14613 Flow Straighter Standard 1" Assembly 14960 Drive Gear Middle Fleck 9000, 9100, 9500, 15135-02 Upper Drive Gear 9000/9100/9500 Fleck Econominder Valves. Fleck part # 15133.
Flow Straighter Standard 1" Assembly 14960
Usually Ships in 2 to 3 Weeks
Your Price: $18.95
Gear - Middle Drive Fleck 9000/9100/9500
IN STOCK
Your Price: $12.95

Flow Straighter for Metered Valves 14613 used on most residential Fleck Metered Valves.
Includes Fleck 5600, 9000, 9100, 2500 and 2510.

Flow Straighter Standard 1" Assembly 14960
Special Order Items - 2 week lead time before shipping
Drive Gear Middle Fleck 9000, 9100, 9500, 15135-02 Upper Drive Gear 9000/9500 Fleck Econominder Valves. Fleck part # 15133.
Gear- Lower Drive  9000/9500 part 15134 Geneva Wheel Fleck 9000 - 14896 Guide Pin, 9000 Housing 15215 ( empty - bare - no parts or o-rings ) for the Injector/ Drain Module For the Fleck 9000 and 9100
Geneva Wheel Fleck 9000 - 14896
IN STOCK
Your Price: $5.00
Guide Pin, 9000
Obsolete Item
Lower Drive Gear for Fleck 9000/9100/9500 Valves. Fleck part # 15134 Geneva Wheel used in Fleck 9000, 9100, and 9500 drive assembly. Guide Pin, 9000. Discontinued part.
Guide is now built into the Middle Gear ( Fleck # 1513502 ).
Housing 15215 ( empty - bare - no parts or o-rings ) for the Injector/ Drain Module For the Fleck 9000 and 9100
Impeller For 5600/9000 3/4 meter body Impeller Post  Standard 1" Assembly 13882 Injector Drain Assembly Fleck 9000 , 9100 Injector Nozzle and Throat Sets Fleck Valves
Impeller 3/4" thru 1.5" PN 13509
IN STOCK
Your Price: $16.95
Impeller For Fleck 3/4 meter body used with models 2500, 2510, 5600, 9000, and 9100 models. Impeller Post for 1" Meter Assembly

Injector/ Drain Module For the Fleck 9000 and 9100
( includes new injectors, new o-rings, and .25 gpm BLFC and DLFC based on tank diameter ).
Injector Nozzle and Throat for Residential and Small Commercial Fleck Valves.
Commonly used in Fleck 3600,5600,2500,2510, and other 1600 injector brine systems.
Injector Screen In Injector Housing Insert, made of brass ( 10332 ) used on 3/8" O.D. Brine Line and Brine Tubes Label Shaft Position Fleck 9000 9100 9500 power head part 15175 Link Piston Rod Lower PN 15019
Injector Screen In Injector Housing
IN STOCK
Your Price: $1.99
Link Piston Rod Lower PN 15019
Usually Ships in 2 to 3 Weeks
Your Price: $8.95
Injector Screen In Injector Housing
Part Number 10227.
Insert, made of brass ( 10332 ) used on 3/8" O.D. Brine Line and Brine Tubes and with Brass Nut ( 10329 ) and plastic sleeve ( 10330 )

Many Fleck valves use this brass insert in the 3/8" tubing connection common with residential water softener valves.
Label used on the Fleck 9000, 9100, and 9500 and Back Plate to show positions during regeneration and also which of the 2 tanks you are currently using.
This is need when you order the bare plate ( pn 15131 ), as it is not included with back plate.
Link Piston Rod Lower PN 15019
Special Order Item - Two Weeks
Link Piston Rod Upper PN 14921 Manual for Fleck 9000 Softener Manual for Fleck 9000/9100/9500 Softeners Meter Assembly 3/4" Dual Port, Slip, Electronic 60086-50
Link Piston Rod Upper PN 14921
Usually Ships in 2 to 3 Weeks
Your Price: $9.95
Manual for Fleck 9000 Softener
IN STOCK
Your Price: $10.00
Link Piston Rod Upper PN 14921
Special Order Item - Two Weeks
Service Manual for Fleck 9000 Softener.
Complete installation, diagrams, service and trouble shooting.
Manual for Fleck 9000/9100/9500 Softeners Meter Assembly 3/4" Dual Port, Slip, Electronic 60086-50
Meter Cable 29/9000 1" 15 1/4 Meter Cable for 9000 3/4" Meter Plastic Cable GUIDE used with the Meter Cable ( 15425 ) used on the Fleck 9000 Valve that uses the standard 3/4" Black Plastic Meter Cover. Meter Complete Extended Range 1" Assembly For 9000
Meter Cable 29/9000 1" 15 1/4
IN STOCK
Your Price: $26.95
Meter Cable for 9000 3/4" Meter
IN STOCK
Your Price: $18.95
Meter Cable GUIDE for 9000 3/4" Meter 15368
Usually Ships in 1 to 2 Weeks
Your Price: $4.95
Meter Complete Extended Range 1" Assembly For 9000
Usually Ships in 2 to 3 Weeks
Your Price: $625.00
Meter Cable 29/9000 1" 15 1/4
Meter Cable used on the Fleck 9000 Valve that uses the standard 3/4" Black Plastic Meter Cover.
Cable length is 13.25".
Plastic Cable GUIDE ( 15638 ) used with the Meter Cable ( 15425 ) used on the Fleck 9000 Valve that uses the standard 3/4" Black Plastic Meter Cover. 1" Meter Assembly For 9000. PN 60390
Extended range ( 1,800 to 25,500 gallons )
**** SPECIAL ORDER ITEM - 2 to 3 week Lead Time ****
Meter Complete Standard Range  1" Assembly For 9000 Meter Cover Brass Extended Range 15237 Meter Cover Brass 1 Standard Range 15218 Meter Cover Extended Range Black - 15150
Meter Complete Standard Range 1" Assembly For 9000
Usually Ships in 2 to 3 Weeks
Your Price: $595.00
Meter Cover Brass Extended Range 15237
IN STOCK
Your Price: $199.00
Meter Cover Brass Standard Range 15218
IN STOCK
Your Price: $169.95
Meter Cover Extended Range Black - 15150
IN STOCK
Your Price: $114.00
1" Meter Assembly For 9000. Comes with standard range meter cover ( 360 - 5,100 gallons ).
* SPECIAL ORDER ITEM - 2 to 3 week Lead Time *
Meter Cover Brass Extended Range ( Used on Commercial 1 inch, 1 1/2 inch and 2 inch meter assemblies ). Meter Cover Brass Standard Range ( used on 1", 1 1/2" and 2" meter assemblies ).
PN 15218

EXTENDED RANGE 3/4" Black Plastic Meter Dome used on some Commercial applications of Fleck Metered Valves.
Includes Fleck 5600, 9000, 9100, 2500 and 2510.
If your program wheel numbers are 1 to 21 DO NOT ORDER THIS Meter Cover -
Use part # 14038 instead.

Meter Cover Standard Black - 14038 Meter Module Canature 3/4 inch Standard - 16STDM Meter Module Black Standard 60086 Micro Switch 3200/3210 Timer
Meter Cover Standard Black - 14038
IN STOCK
Your Price: $79.99
Meter Module 3/4 inch Standard - 16STDM
IN STOCK
Your Price: $59.00
Meter Module Black Standard
IN STOCK
Your Price: $139.00
Sale Price: $119.00
Micro Switch 3200/3210 Timer
IN STOCK
Your Price: $9.95

Standard 3/4" Black Plastic Meter Dome used on most residential Fleck Metered Valves.Includes oring ( 13847 ).
Commonly used on Fleck 5600, 9000, 9100, 2500 and 2510 Models.

After market ( Manufactured for Hankscraft and Not Fleck ) Complete Meter Module includes meter cover ( standard range 0 - 2,100 gallons ), meter body, impeller, o-rings, but NO mounting clips, and NO screws. Complete Meter Module includes meter cover ( 14038 ),meter body, impeller, orings, mounting clips, and screws.
* SALE PRICED at $ 119.00 for a limited time *
Micro Switch 3200/3210 Timer
Micro Switch Auxiliary Third Switch KIT  PN 60320-10 Auxiliary Switch Kit 60320-02 used in the timer assembly for 3200/3210,or Fleck 9000, 9100, and 9500 timer assembly Micro Switch for Drive Motor - 10218 Micro Switch Program 9000, 9100, 9500 Fleck 16433
Micro Switch Auxiliary Third Switch KIT PN 60320-10
Usually Ships in 2 to 3 Weeks
Your Price: $42.00
Micro Switch Auxiliary Timer 3200 and 9000 PN 60320-02
Usually Ships in 2 to 3 Weeks
Your Price: $24.95
Micro Switch for Drive Motor - 10218
IN STOCK
Your Price: $8.99

Switch Assembly, 3900/9000/9100/9500 White Drive Cam (Adding a third switch)
SPECIAL ORDER ITEM ( 2 - 3 week Lead time before shipping this item ).

Auxiliary Switch Kit 60320-02 used in the timer assembly for 3200/3210 Timer
Also used on Fleck 9000, 9100, and 9500 timer assembly.
SPECIAL ORDER ITEM ( 2 - 3 week Lead time before shipping this item ).
Micro Switch used to control drive motor
Used on several models of Fleck Valves.
Micro Switch Program 9000, 9100, 9500 Fleck 16433
Micro Switch Timer Assembly 9000, 9100, 9500 Fleck 15314 Motor - Drive 9000/9500  220v 18739 or 61633-02 Motor - Drive 9000/9500  120v 18738 14927 61633-01 Motor - Drive 9000/9500  24v 50/60 Hz 18737  61633-00
Micro Switch Timer Assembly 9000, 9100, 9500 Fleck 15314
Inner "activation" switch that turns on the timer motor to start the regeneration process.
Fleck 9000,9100,9500 Drive Motor 220v 50 Hz or 60 Hz, used to move pistons during regeneration.
220 / 230 Voltage used in many countries outside of the U.S.A.
Fleck 9000,9100,9500 Drive Motor 120v 60 Hz ( 18738 or 61633-01 ) , used to move pistons during regeneration.
Originial part number 14927.
Motor - Drive 9000/9500  24v 50/60 Hz 18737  61633-00
Motor - Timer Fleck  24 V  ( replaces 13494 ) 19659-1 Motor - Timer Fleck 120 V 60 Hz 1/30 rpm  18743-1 ( replaces 13400, B13400 & 13944 ) Motor - Timer Fleck 24V 50Hz 1/30 rpm ( replaces 14736 ) 18826-1 Mounting Plate adapter kit 9000 Drive Motor 42296-10
Motor - Timer Fleck 120V 60Hz 1/30rpm 18743-2 old 13400, B13400,13944
IN STOCK
Regular Price: $32.95
Sale Price: $19.95
24 Volt Timer Motor is 1/30 rpm and has blue wires. Newest part number 19659-1.
Previously # 13494 or just # 19659.
Requires 24 volt AC transformer.
Used in some Fleck 5600, Fleck 32/3210 Timers ( 2500, 2510 Valves ) and Fleck 9000 ( & 9100 ).
Timer Motor Fleck 120 V 60 Hz 1/30 rpm is now 18743-1 Replaces 13400 ( the standard for 20 years in Fleck 5600 ) & 13944 ( used the Fleck 9000 ) & 18743 ( red plastic drive gear used from 2000 - 2003 ) Timer Motor
Also used in 32/3210 Timer Assemblies of the 2510 and many commercial Fleck Control Valves.

Timer Motor Fleck 24 V 50 Hz 1/30 rpm is now 18826-1, and Replaces 14736 Timer Motor Also used in some model 5600 and 32/3210 Timer Assemblies.

Used mostly outside of the U.S.A. for Fleck 5600 and newer 3200, and 9000 Flecks that operate on 24 volt 50 Hz The older timer motors like this were marked with the part # 14736 on Fleck 5600. Often with a letter B in front of the number.

Mounting Plate adapter kit 9000 Drive Motor 42296-10, includes Ground Plate and new screws.
Brass Nut ( 10329 ) used on 3/8" O.D. Brine Line and Brine Tubes. Nut, Tinnerman, U Type, 8 - 32, for back plate and designer cover, Fleck PN 18728 Oring - Adapter Coupling 13305 O-ring - Adapter Uniflex Cuno MacClean ORG-234
Nut Brass for 3/8 tubing PN 10329
IN STOCK
Your Price: $2.00
O-ring - Adapter Coupling 13305
IN STOCK
Your Price: $1.00
Brass Nut ( 10329 ) used on 3/8" O.D. Brine Line and Brine Tubes.
Nut, Tinnerman, U Type, 8 - 32, for back plate and designer cover, Fleck PN 18728 O-ring 13305 for Meter Module 2510, 5600, 9000, and 9100.
Also, used on Adapter Couplers of these Valves and other Fleck Valves.
Sold individually, so order the amount you need ( usually 2 or 4 ).
ORG-234 is Cuno ( MacClean after 2003 ), 3M ( bought out Cuno and MacClean ) O-ring for their proprietary Tank ( UNIFLEX ) and Adapter.
Also, common for many newer ( since 2003 ) MacClean / CUNO Valve body / adapters.
Oring - Distributor 1.05 PN 11710 Oring - Tank Adapter 5000, 2510, 9100 PN 18303 Oring 9100 Second Tank  Assemblies PN 13287 Oring BLFC Fitting 5600 - 12977
O-ring BLFC Fitting 5600 - 12977
IN STOCK
Your Price: $1.00
Distributor Oring 1.05" ( also called 1" )
Used on Fleck 2500, 2750, 3600, 9100 and 9000 Valves
Part number = 11710, V3150
Tank O-ring 18303 used on Fleck 5000, 2510, and 9100 tank adapters Oring 9100 Second Tank Assemblies PN 13287.
This oring is held in place by the white C ring ( quantity 4 required, so be sure to select Quantity 4, if you need the Set ) used with 9100 cross over to 2nd tank yoke assembly.
Oring used on brass 3/8" brine fitting ( which is part # 13244 ).
Oring Brine Valve 13302 quantity one Oring For Valve Body top of tank 12281 O-ring Injector Cover 5600, 9000, 9100 - Fleck part 13303 Oring Injector For 5600 - Fleck part 13301
O-ring Brine Valve 13302 quantity one
IN STOCK
Your Price: $1.00

O-ring used with the Brine Valve Piston Assembly.
There are Two used in the Valve Assembly.
One on the Brine Valve and One in the Hole that the Brine Valve sits inside.

Top of Tank ( bottom of Valve ) O-ring for Fleck 5600, and Fleck 9000 Valves. Oring used on cover of the Injector Drain Module for the Fleck 5600, 9000, and 9100 valves. Oring used on the Injector Drain Assembly For Fleck 5600, and 9000 or 9100 models.
Oring Meter Cover Assembly Piston Assembly 9000 Top - 60400 Piston Assembly Fleck 9000 Lower - 60401 Power Head Fleck 9000 / 9100 SXT 24 volt 60 Hz
O-ring Meter Cover Assembly
IN STOCK
Your Price: $2.50
Piston Assembly 9000 Top - 60400
IN STOCK
Your Price: $52.95
Piston Assembly Fleck 9000 Lower - 60401
IN STOCK
Your Price: $92.95
Power Head Fleck 9000 / 9100 SXT 24 volt 60 Hz
Usually Ships in 1 to 2 Business Days
Your Price: $379.00
O-ring used on all 3/4" and 1" meter covers. Top Piston Assembly for Fleck 9000, 9100
Also used as single main piston assembly in InAqua model 4000, and Ultimate II model 9400 Valves.
Bottom or Lower Piston Assembly for Fleck 9000, 9100 Complete Fleck 9000 / 9100 assembled "Power Head" Portion.
This includes everything in the "Drive Assembly" and the "SXT Timer Assembly".
Has wire to meter cable, but does not include the meter module

** 24 volt transformer NOT included and this is the 60 Hz ( USA ) version.
Power Head Fleck 9000 9100 Power Head Fleck 9500 Electronic XT timer 24 volts Program Wheel Assembly 1/15 rpm PN 19210-02 Program Wheel Assembly Fleck 9000 3/4 meter 16270-10
Power Head Fleck 9000 9100 PN 60412-XX
IN STOCK
Your Price: $282.00
Power Head Fleck 9500 Electronic XT timer 24 volts
Usually Ships in 2 to 3 Weeks
List Price: $794.00
Complete Fleck 9000, 9100 model assembled "Power Head" Portion.
This includes everything in the "Drive Assembly" and the "Timer Assembly".
Has meter cable, but does not include the meter module
The Timer will come with the "Meter Range" program wheel that you MUST Select when ordering.
NOTE: Extended Meter 3/4" and both 1" meter ranges may require special order ( shipping delay of 2 weeks ).
Also - 220/230 Volt 50 Hz Power Heads are SPECIAL Order ( at least 2 weeks Lead Timer before shipping ).
Electronic 9500- XT Complete Fleck 9500 assembled "Power Head" Portion.
* Works on Fleck 9000, 9100, and 9500 as long as you have an electronic meter cap to attach it to *
Special 90 Minute Program Wheel Assembly used on Fleck 9000/9100/9500 Timer Assemblies that also use the 1/15 rpm timer motors. Program Wheel Assembly Fleck 9000/9100 matches 3/4" meter, PN 16270-10
This is comes with standard range program wheel label showing 125 - 2,100 gallons.
Please tell us in Order Notes if you need a different gallon range.
Retain Ring, 14917, use with Upper ( 15133 ) and Lower ( 15134 ) Drive Gear. Retainer - Piston Rod PN 14309 Ring Yoke Retainer 9100 Yoke Assembly Screen Brine Line Insert 12767
Retain Ring 14917 Drive Gear
IN STOCK
Your Price: $2.95
Retainer - Piston Rod PN 14309
Usually Ships in 24 Hours
Your Price: $3.95
Ring Yoke Retainer 9100 Yoke Assembly
IN STOCK
Your Price: $2.50
Screen Brine Line Insert 12767
IN STOCK
Your Price: $3.95
Retain Ring, 14917, use with Upper ( 15133 ) and Lower ( 15134 ) Drive Gear. Retainer - Piston Rod PN 14309 Ring Yoke Retainer 9100 Yoke Assembly.
This is the white C ring ( quantity 4 required, so be sure to select Quantity 4, if you need the Set ) used with 9100 cross over to 2nd tank yoke assembly.
Screen Brine Line Insert 12767
Screw, # 4-40, PN 11335, used with Piston Assembly for Fleck 9000, 9100, and 9500. Screw For 9000 or 9100 Back Cover 15137 Screw for Adapter Clip Fleck 9000 Screw used with Fleck Adapter Clip pn 13314
Screw 11335 Fleck Piston Assembly
IN STOCK
Your Price: $1.00
Screw for Adapter Clip Fleck 9000
IN STOCK
Your Price: $1.00
Screw, # 4-40, PN 11335, used with Piston Assembly for Fleck 9000, 9100, and 9500. Screw For 9000 or 9100 Back Cover.
PN 15137
# 10-24
Screw ( Hex Head # 8 - 32 ) for Adapter Clip on the Fleck 9000.
Screw for Adapter Clip used on various Fleck Valves.
Each valve will have at least two, and metered valves will have four.
Seal 13242 sold in 5 pack Seal 13242 sold Individually Seal and Spacer Kit Lower Fleck 9000 and 9100 - 60421 Seals and Spacers Kit Fleck 5600 and 9000 – 60125
Seal 13242 sold in 5 pack
IN STOCK
Your Price: $7.50
Seal 13242 sold Individually
IN STOCK
Your Price: $1.50
Seal 13242 sold in 5 pack Seal 13242 sold Individually Lower Seals and Spacers Kit for Fleck 9000, or 9100 Valve. 60125 Top Seals And Spacers Kit for many Fleck Valves, such as the 5600, 5600SE, 5600SXT, 6600, 6700, 9000, and 9100 Valves.

Silicone 1 Gram Tube Lubricant for O-rings Spacer, Washer 15692 Thumb Screw for Fleck 2500, 2510, 2750, 2850 Timer Assembly Fleck 9000 120 volt 1/30 rpm - 60376-XX
Spacer, Washer 15692
IN STOCK
Your Price: $1.00

One gram of food grade silicone for use with o-rings, gaskets and seals.
Enough to lubricate about a dozen or more o-rings and seals.
These tubes come from one of the leading valve manufacturers.

Spacer ( Washer 3/8" ), PN 15692, used with Retain Ring, 14917, and use with Upper ( 15133 ) and Lower ( 15134 ) Drive Gear. Thumb screws ( New part # 19367, and old part # 18727 ) used with Stainless Steel Backplate ( #3440264 ) and "designer" cover ( #3460232-11 ).
Usually ordered in pairs.
Fleck 9000 / 9100 / 9500 Econominder Timer Assembly. These include 1/30 rpm motor ( in voltage you select ).
This is the "door" with program meter wheel on front and timer motor on back.
This comes with standard range program wheel label showing 125 - 2,100 gallons.
Please SELECT the gallon range you need.
Timer Circuit Board SXT Fleck 9000/9100/9500 PN 42777 Timer Housing Assembly Fleck 9000, 9100, 9500 PN 13870-03 Transformer, D-TRANS, 24 volt, 60 HZ, AC, 450 ma, includes twin lead wiring. Transformer Fleck Electronic 24 volt 19674
Timer Circuit Board SXT Fleck 9000/9100/9500 PN 42777 Timer Housing Assembly Fleck 9000, 9100, 9500 PN 13870-03. Bare plastic housing ONLY. Transformer, D-TRANS, 24 volt, 60 HZ, AC, 450 ma, includes twin lead wiring. Transformer Fleck Electronic 24 volt 19674 ( newer PN 44147 ) for Fleck 24v Timer Motors as well as Models SXT and SE.
24 volt 60 hz 400 ma. with wiring.
41475 TRANSFORMER, 24V, 9.6VA, EUROPEAN 50 Hz Turbine Meter Assembly 3/4 Electronic 19797 no clips Valve - 9100 Meter 3/4"  for Twin Resin Tanks Valve - Fleck 9000 MTR 3/4" Soft 120 Volt 60 Hz
Transformer Fleck Electronic 24 volt 50 Hz 41475
Usually Ships in 2 to 3 Weeks
Your Price: $39.95
41475 TRANSFORMER, 24V, 9.6VA, EUROPEAN 50 Hz

**** Special Order Item - Lead time 2 to 3 weeks before shipping ****
3/4" Electronic Turbine Meter Assembly for Fleck Models, such as the 5000SE, 5600SE, 2510SE, 8500SE and all SXT controlled Valves.
Includes orings, but NO clips,or screws.
New Fleck 9100 Econominder Softener Valve 120 Volt and Standard Range ( 0 - 2,100 gallon ) Meter. Fleck 9000 Econominder Twin Tank Softener Control Valve.
Standard Range meter 0 - 2,100 gallons.
120 volt 60 hz .
We must know tank diameter to be used on, to insure we send you the correct "second tank" cross over piping, and install the proper Injector and DLFC.
Valve Body Bare Fleck 9000 PN 14861-01 Valve Body Bare Fleck 9100 PN 40688 Video 9000 Valve Washer, Thrust PN 15372 for Gear- Drive  9000/9100/9500
Valve Body Bare Fleck 9000 PN 14861-01
Usually Ships in 1 to 2 Weeks
Your Price: $395.00
Valve Body Bare Fleck 9100 PN 40688
Usually Ships in 1 to 2 Weeks
Your Price: $99.00
Video 9000 Valve Servicing DVD
IN STOCK
Your Price: $35.00
Valve Body Bare Fleck 9000 PN 14861-01
This is the metal body only.
SPECIAL ORDER ITEM - Allow extra 10 days to ship.
Valve Body Bare Fleck 9100 PN 40688
This is the plastic 9100 body only.
SPECIAL ORDER ITEM - Allow extra 10 days to ship.
Very Complete Training produced by Fleck.
Explains all features, how to set up, service and rebuild valve for the original Fleck 9000 valve with mechanical Econominder timer
( does not reference SE or SXT timers ).
And the basics would apply to the newer plastic version, Fleck 9100, as the power head, and valve body parts are 95% the same.
1 hour and 50 minutes DVD.
Original produced by Fleck as a VHS tape and we have copied ( and sell ) on DVD.
Washer, Thrust PN 15372 for Gear- Drive 9000/9100/9500
Usually does not need to be replaced, unless you lose one of the two on the drive assembly.
Use with Upper Drive Gear, 15133, and Lower Drive Gear, 15134.
Yoke 1"   Stainless Steel -13398 4102601 Yoke 1" Male Plastic - 18706 Yoke 3/4" Stainless Steel Fleck - 13708 Yoke Assembly 10 1/2" 8 -14" tank cross over 9000 15823-14
Yoke 1" Stainless Steel -13398 4102601
IN STOCK
Your Price: $45.00
Yoke 1" Male Plastic - 18706
IN STOCK
Your Price: $9.95
Yoke Assembly 10 1/2" 8 -14" tank cross over 9000 15823-14
Subject to availability
Your Price: $89.00
1" female NPT Yoke for Fleck Valves.
Stainless Steel has replaced the Brass used in the past.
1" Yoke Male Plastic used instead of metal by pass, or used with plastic by pass. Yoke 3/4" Stainless Steel Fleck - 13708 41027-01
3/4" female thread connection.
Cross over - Yoke Assembly 10 1/2" for use with tanks of diameter ranging from 8 -14"
We have only 2 of these and they happen to be "Nickel Plated" as shown in the photo.
Yoke Assembly 12 1/2" 9000 Yoke Assembly 8 1/2" 6-12"TK 9000 Yoke Sweat 1 inch Brass Fleck 9000 13708-40
Yoke Assembly 12 1/2" 9000
IN STOCK
Your Price: $135.00
Cross Over - Yoke Assembly 12 1/2" for Fleck 9000
For tank diameters 13 - 16 inches.
Cross over - Yoke Assembly 8 1/2" for use with tanks of diameter ranging from 6-12"
1" Brass Sweat Yoke used to make "cross off" between tanks on the Fleck 9000 valves.
You'll need two of these.