Repair Parts

Accessories

You are here: Home > Fleck > 2510 Parts

Fleck 2510 Valve Parts   2510 Environmental Powerhead 2510 Designer Powerhead 2510 Valve Body 3200 Timer Assembly 3210 Timer Assembly Service Assemblies Common parts listed below **** CLICK on Diagrams to ENLARGE Adapter Base 2510 Adapter Coupling 19228 Air Disperser Fleck 2510 PN 16221 Bracket Brine Valve Side Motor Mounting PN 11826 Your Price: $47.00 Your Price: $5.00 Your Price: $5.95 Your Price: $8.00 Adapter Base part # 19322 for Fleck 2510 NOTE: Does not include any orings or oring retainer. This are sold separately. 2 1/2" x 8 thread, which is the standard tank opening used. Adapter coupling Kit with o-rings, clips, and screws Sold Individually, so order 2 if you need a pair. Air Disperser Fleck 2510 PN 16221 Bracket Brine Valve Side Motor Mounting PN 11826 Brine Line Flow Control 1650 BLFC .25 GPM Plastic Brine Line Flow Control 1650 BLFC .50 GPM Plastic Brine Pick Up Tube with Air Check 60002 Brine Valve Piston Assembly 1650 Plastic Your Price: $13.95 Your Price: $13.95 Your Price: $12.00 Your Price: $35.95 1650 BLFC .25 GPM Plastic. This is Brine Line Flow Control is used for water softener application on the Fleck 2510 Brine Valve. Brine Valve Piston Assembly ( 60011 ) sold separately. 1650 BLFC .50 GPM Plastic. This is Brine Line Flow Control is used for water softener application on the Fleck 2510 Brine Valve. Brine Valve Piston Assembly ( 60011 ) sold separately. Fleck J-Tube 3/8 " X 34 " Long. Can be cut down to fit your salt tank. Old p.n. 3460002, now FP60002. 1650 Brine Valve Piston Assembly with out BLFC fitting. The BLFC fitting is normally reused. Or it can be purchased separately. By Pass Seal Gasket 11726 or 14105 By Pass Valve Plastic Fleck - 60049 Cam, Black Brine 2500 2750 2900 Cam, Drive STF Black Fleck 2500 2750 2850 - 12576 Your Price: $7.95 Your Price: $31.95 Your Price: $6.00 Your Price: $19.95 PN 11726, Seal For Fleck Metal By Pass Valves. Older versions were Brass, or Nickel Plated Brass. Newer versions are Stainless Steel. This Seal Gasket works with all versions and both 3/4" and 1" sizes. Plastic By Pass Body for Fleck 5600, 2510, and 9000. Requires an additional YOKE to connect to your plumbing. Cam, Black Brine use on Fleck 2500, 2510, 2750 and other models of softener valves. Cam, Drive 2500, 2510,2700, 2750, 2850. Drive Cam -STF ( softener ), old Fleck part # 12576 Newer part # 60160-10 Clamp Ring Assembly Fleck 2510 Cover New Environmental Style Fleck - PN 6021902 Distributor - Top 1.05 Twist On - D1203 or 18280 DLFC Button 2.4 gpm Your Price: $19.95 Your Price: $29.00 Your Price: $3.00 Your Price: $2.50 Clamp Ring Assembly for Base of 2510 Adapter New Style Cover for Fleck 2510, 2750, 2850, 2900, 9000, 9100 and 9500 Fleck valves that have the special hinged back plate. Cover includes plastic hinge pin. 1.05 Top Distributor Twist On Style used on Newer Fleck and Autotrol Control Valves. Old part number 23D1203, new part numbe MD1203. Replaces Fleck p.n. 18280 collector, top, 1"x.011, gray 2.4 gpm Drain Line Flow Control ( DLFC ) Button is commonly used with softener valves installed on 10" diameter resin tanks. DLFC Button 2.0 gpm DLFC Button 5.0 gpm DLFC Housing 11385 & 11183 or new PN 6070500 DLFC Housing 2500/2700/3600 Your Price: $2.50 Your Price: $2.50 Your Price: $10.00 Your Price: $10.00 2.0 gpm Drain Line Flow Control ( DLFC ) Button is commonly used with softener valves installed on 9" diameter resin tanks. 5.0 gpm Drain Line Flow Control ( DLFC ) Button is commonly used with softener valves installed on 14" diameter resin tanks. And 9" , and 10" tanks used for MGS ( Green Sand ) and Carbon Back Wash Filter applications. Plastic Drain Line Flow Control Housing with oring (11183 ). You will need to order the DLFC Button Separately. Used on Fleck 3600, 2500, 2510, 2700 Plastic Drain Line Flow Control Housing. Includes Oring 11183. DLFC button is available separately, or you can re-use your old one. Drain Fitting, 1/2 m x 1/2 Barb, Elbow Fitting, Drain 1/2 m x 1/2 Barbed Gasket Injector Body 1600 Gasket Injector Cover 1600 Your Price: $1.50 Your Price: $1.00 Your Price: $1.50 Your Price: $1.50 Drain Fitting, 1/2" male thread x 1/2"  Barbed, Elbow. 1/2" male thread  x 1/2" Barbed slip on fitting Gasket Injector Body 1600 injector. Commonly used on several Fleck Valves ( 1500, 2500, 2510, 2750, 3600 and others ) Gasket Injector Cover used on various Fleck Valves ( 1500, 2500, 2510, 3600, etc ). Top gasket for what is called the 1600 injector and brine system ( 3/8" tubing used ). Gear - 24 Hour Wheel Assembly 56/3200 Gear- Main Drive 3200/3210 part 13911 Injector Body old part 12083 Injector Nozzle and Throat Sets Fleck Valves Your Price: $8.00 Your Price: $6.00 Your Price: $9.95 Your Price: $8.00 24 Hour Wheel Assembly used on Fleck 5600 and 3200 Timer Assemblies. This gear does not normally break or cause any problems. Main Drive Gear used in Fleck Timer Assembly 3200 and 3210. NOT the same as the one used in older model 3000 Timer Assemblies. 17776 Replaces # 12083 1600 Injector Housing used on Fleck 1500, 2500, 2510, 3600 Valves Injector Nozzle and Throat for Residential and Small Commercial Fleck Valves. Commonly used in Fleck 3600,5600,2500,2510, and other 1600 injector brine systems. Injector Screen In Injector Housing Manual for Fleck 2510 Valve Meter Body Black Standard 13821 Meter Cable- Right Angle Meter 2510 Your Price: $1.99 Your Price: $10.00 Your Price: $69.00 Your Price: $19.95 Injector Screen In Injector Housing Part Number 10227. Owners Service and Operation Manual for Fleck 2510 Valve Empty Meter Body and nothing else. Meter Cover ( 14038 ), impeller, orings 13305 - quantity 4, or 13847 ), mounting clips, and screws would NOT be included. Meter Cable for Fleck 2510 Econominder. Length = 13.87" inches Manual describes this cable as meter cable 13" Std/Ext., Rt. angle. Meter Cover Right Angle Standard - 15452-90 Meter Cover Standard Black - 14038 Meter Module 2510 Right Angle Standard Meter Module Black Standard Your Price: $89.00 Your Price: $69.00 Your Price: $159.00 Your Price: $149.00 Right Angle PN 15452-90 Standard 3/4" Black Plastic Meter Dome used on some residential Fleck 2500, 2510 and 8500 Metered Valves. Standard 3/4" Black Plastic Meter Dome used on most residential Fleck Metered Valves.Includes oring ( 13847 ). Commonly used on Fleck 5600, 9000, 9100, 2500 and 2510 Models. Complete Meter Module for Fleck 2510 includes right angle meter cover ( 15452-90 )),meter body, impeller, orings, mounting clips, and screws. Complete Meter Module includes meter cover ( 14038 ),meter body, impeller, orings, mounting clips, and screws. Micro Switch 3200/3210 Timer Micro Switch for Drive Motor - 10218 Micro Switch Inside 3200 Timer Motor Drive with Bracket 115V 50/60 Hz 41453 Your Price: $9.95 Your Price: $8.95 Your Price: $7.95 Your Price: $89.00 Micro Switch 3200/3210 Timer Micro Switch used to control drive motor Used on several models of Fleck Valves. Micro Switch used inside 3200 Timer Assembly Motor  Drive  with Bracket 115V  50/60 Hz 41453 Motor - Timer Fleck 120V 60Hz 1/30rpm 18743-1 old 13400, B13400,13944 Nut used on 1650 Brine Valve Assembly GFN 19625 6900-40 Oring - Adapter Coupling 13305 Oring - Distributor 1.05 # 13304 Regular Price: $32.95 Your Price: $4.50 Your Price: $1.00 Your Price: $2.00 Timer Motor Fleck 120 V 60 Hz 1/30 rpm is now 18743-1 Replaces 13400 ( the standard for 20 years in Fleck 5600 ) & 13944 ( used the Fleck 9000 ) & 18743 ( red plastic drive gear used from 2000 - 2003 ) Timer Motor Also used in 32/3210 Timer Assemblies of the 2510 and many commercial Fleck Control Valves. Nut used on 1650 Brine Valve Assembly GFN 19625 The BLFC fitting and Brine Valve ( 1650 ) are normally reused. Or they can be purchased separately. O-ring 13305 for Meter Module 2510, 5600, 9000, and 9100. Also, used on Adapter Couplers of these Valves and other Fleck Valves. Sold individually, so order the amount you need ( usually 2 or 4 ). Distributor Oring 1.05" ( also called 1" ) Used on Fleck 5600, and 2510 Valves Oring - Tank Adapter 5000, 2510, 9100 PN 18303 Oring 25/27 DLFC Housing Piston and Seals KIT Fleck 2510 PN 61670-00 Piston Assembly Fleck 2500, 2510 - 60090 Your Price: $3.00 Your Price: $1.00 Your Price: $49.95 Your Price: $42.95 Tank O-ring 18303 used on Fleck 5000, 2510, and 9100 tank adapters Oring 1500, 2500, and 2700 Drain Line Flow Control Housing Piston and Seals KIT Fleck 2510 PN 61670-00 Main Piston Assembly ( P.N. 60090 ) used in Fleck 1500, 2500, 2510, 2700. This assembly comes complete with seal o-ring end plug PN 40078, old part number 10234, and quad o-ring ( 10209 ). Matching Seal Kit is 60121. Power Head Fleck 2500, 2510 - PN 60407 Program Wheel 13380 19210 Retainer - Distributor Tube 13030 Retaining Clip for DLFC Housing 2510 - 18312 Your Price: $199.00 Your Price: $4.95 Your Price: $1.00 Your Price: $1.00 Complete Power Head with 12 day timer assembly for Fleck 1500, 2500, and 2510 Valves. Does not include Valve Body or Brine Piston Assembly. Program Wheel 13380 19210 Retainer for 1.05" distributor orings 5600, and 2510 Clip used to hold Plastic Drain Line Flow Control Housing. ( PN 11385 ) used with Fleck 2510 Valves. Seal - Base Seal Fleck 2510 Seals and Spacers Kit 60121 Service Repair Kit 60135-2510 for the Fleck 2510 - Obsolete Slip Ring Base of 2510 Your Price: $7.00 Your Price: $20.00 Your Price: $2.50 Base Seal  for Fleck 2510 Valve Seal & Spacer Kit 60121 for Main Piston used on Older Fleck 1500, and 2500. Also used on newer 2510, 2700, 2750, and 2900 upper piston. Service Repair Kit 60135-2510 for the Fleck 2510 = OBSOLETE Slip Ring part # 19197 for Base of 2510 Adapter Timer Assembly - 3200 version 60304-13 Timer Assembly - 3210 version Econominder 60306-13 Timer Assy, SXT 2510/2750/2850 Fleck PN 42778 Tool - Stuffer to Install Seals and Spacers - 11098 Your Price: $79.00 Your Price: $85.95 Your Price: $149.00 Your Price: $39.00 3200 Timer Assembly 12 Day Skipper Wheel, 120 volt Timer Motor, and wiring harness. Replaced the 3000 version over 15 years ago. Timer Assembly - 3210 version Econominder 60306-13 Timer Assembly SXT Electronic Control Timer Assembly used on Fleck Models 2510 / 2750 / 2850 made to operate on 12 volts and 60 Hz. This is Just the Controller. Note: This control is sold as a replacement for your old 2510, 2750 or 2850 Electronic Control Timer Assembly Here's a few of the key features of the SXT: Stuffer Tool that helps when installing seals and spacers in Fleck 2500, 2510, 2700, 2750, and 2900 ( upper ) Valves. Also, can be used with 3600 seal kit. Transformer Fleck Electronic 24 volt 19674 Tube for 2510 - 1650 Brine Valve w/o nuts Turbine Meter Assembly 3/4 Electronic 19797 no clips Valve - Fleck 2510 12 Day Softener Your Price: $29.95 Your Price: $3.95 Your Price: $139.00 Your Price: $349.00 Transformer Fleck Electronic 24 volt 19674 for Fleck Models 5000SE, 5600SE,2510SE and 8500SE. 24 volt 60 hz 9.6 va. Tube for 2510 - 1650 Brine Valve w/o nuts 3/4" Electronic Turbine Meter Assembly for Fleck Models 5000SE, 5600SE,2510SE and 8500SE. Includes orings, but NO clips,or screws. Fleck 2510 with 12 Day Softener Control Valve 120V 60 Hz. Replacement for Fleck 2500. Includes Cover, Drain Fitting, DLFC installed. Valve - Fleck 2510 Manual Backwash Filter Valve Body 2510 PN 19328 Your Price: $179.00 Your Price: $59.95 Valve - Fleck 2510 Manual Backwash Filter Valve Body 2510 PN 19328 for Fleck 2510 NOTE: Does not include any orings or seals. These are sold separately.

• About Us
• Email Support
• Helpful Information

• View Cart
• Sign-In / View Account
• Order Status

• All Category Index
• All Product Index

• Return Policy
• Privacy Policy
• Terms & Conditions